Full circle gear Saturn light Guide

Please read all instructions including

but not limited to warnings about

personal injury and risk of the light

fixture tipping over.

Complete information and additional

accessories are available at

www.FullCircleGear.com

Saturn Light®: Installation and Assembly Guide

for more information, please go to FullCircleGear.com

Battery Saver Mode (9hrs)

From one battery:

Max Output Mode (3 hrs)

Box Contents

Optional, but recommended for

outdoor use. Do before step 5.

For more information on the remote and

app connectivity please go to

www.FullCircleGear.com

Smart Assistant integration requires a free

Magic Home Pro account to connect to

online features like Smart Assistants and

remote device access.

Step 2: Open wi-fi settings on the

phone and connect to

"LEDnetxxxxx" wi-fi.

After successful connection, go

back to the Magic Home Pro App.

The Saturn Light®will be listed

under “Devices”

1. Remove from pole. 2. Rotate inner or outer ring. 2. Flip light completely around

Note: The ring only spins one direction Note: Threads should be on the bottom

Step 3: Make sure Step 1 and 2 are done. Then open the App and click the "+" button in the

upper right corner, then select "Connect device to wi-fi network".

Step 4: Choose the wi-fi network you want the light to be on and enter the password if needed. The

Light may change color as it connects to the network. You can also change the name of the Light now.

Step 5: The Light is now connected! Connect your phone to the same network as the light to see

it in the App. Create a free Magic Home account for remote access and smart features.

Saturn Light®: How to use the Saturn Light

10sec

off

RGB Color Presets

Speed Faster

Cool White

Speed Slower

Off

Next Effect

Previous Effect

Brightness Up

Brightness Down

Step 1: Download SmartPhone

App

“Magic Home Pro”

Connect to the App

Change From Up to Down Light - Flip the Ring Around the Light Remote Guide

Connect Saturn Light to a wi-fi Network.

Pair a new Remote

Warm White

RGB Color

Cool Warm Mix

for more information, please go to FullCircleGear.com

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

‐ Reorient or relocate the receiving antenna.

‐Consult the dealer or an experienced radio/TV technician for help important announcement Important

Note: Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator

and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.