Fulterer FR 1535 User manual

Mounting Instructions
FR 1535, FR 1550, FR 1560 Pencil Tray Pull-Outs
www.fultererusa.com page 1 of 2(1103#133)
75
LBS
TOP
FR1560
FR1535
FR1550
Features
<These pencil tray pull-outs provide a
complete solution in one compact unit
<The front of the tray allows easy
attachment of a drawerfront
<Top mount brackets are supplied
<Option: The FR311 and FR5162 slides can
also be used with these pencil trays

Mounting Instructions
FR 1535, FR 1550, FR 1560 Pencil Tray Pull-Outs
www.fultererusa.com page 2 of 2
Diagram 1
Min. Build-in width: FR 1535 366 (14.41)
FR 1550 366 (14.41)
FR 1560 605 (23.82)
56
(2.20)
*4 mm (5/32 in.) Dia.
3216
16
K
mm (in.)
Diagram 3
Drawer Front
(not supplied)
2
1
DHK
A
E C B GF
Diagram 4
Variable
Drill diagram Worksurface
Left Right
FR1535 298 (11.75)
FR1550 298 (11.75)
FR1560 542 (21.34)
Front Edge of Worksurface
FF
FR1535 256 (10.08)
FR1550 384 (15.12)
FR1560 352 (13.86)
mm (in.)
Diagram 2
2
1
H
D
1. If a drawer front (not supplied) needs to be attached, drill holes
according to Diagram 1. Use #6 x 3/4" panhead screws (G)
(not supplied). Be sure the drawer front is in the correct position
before attaching bottom (B) into tray (A) with either hot-melt
glue or double-sided tape.
2. Attach drawer profile (C) to tray (A) and bottom (B) with screws
(E and F). See Diagram 3.
3. Attach cabinet profile (D) to the top mounting brackets (H) See Diagram 2.
Use screws (K) to mount brackets (H) to worksurface. See Diagram 4.
Fasteners Supplied:
E8 pcs. #6 x 5/8 in. black
F8 pcs. #6 x 7/16 in. black
K12 pcs. #6 x 5/8 in. black, panhead
(1103#133)