Fundex games Bagball User manual

Ages: 6+

Players: 2–4

Contents:

• Game board and assembly pieces

• 3 blue beanbags / 3 red beanbags

• Instructions

Bagball

Object: Try and be the first player to reach 300 points

by landing your beanbags in the various nets.

Setup: Position the Bagball side of the cloth facing

toward you (as shown to the right). Move the

scoring markers on the arch to zero. The score

marker on the side is not used in this game.

Game Play: Bagball may be played with

either 2 or 4 players divided into 2 teams.

Teams pick a color of bags to use throughout

the game and position themselves 10 - 15

feet away from the game board.

The game consists of rounds. During each

round, players take turns tossing their bags

at the game board (If playing with 4 players,

teams alternate their players each round).

If the bag successfully lands into the net the player scores the value

marked. A round is not finished until all 6 bags have been tossed.

At the end of the round, scores are totaled and players move the scoring

markers on the game board to reflect their total score. The first player to

reach 300 points is the winner. In the event of a tie, players toss one

additional bag. The player who scores the highest number of points on

that toss is the winner. If there continues to be a tie, continue tossing one

bag until a winner is determined.

Advanced Play: For a more competitive game, players may cancel each

other’s bags during the round. Teams only score the difference between

the highest and lowest score for the round. Example, Player one lands 50

points worth of bags and player two lands 40 points. Player one then

scores 10 for the round (50 – 40 = 10). [REMEMBER–Only one team can

score per round in Advanced Play!]

Big League Bagball

Object: Score the most runs in 9 innings

by landing beanbags in the various nets to

score runs.

Setup: Position the Big League Bagball side

of the cloth facing toward you (as shown to

the right). Move the scoring markers to zero

and the inning marker to one. Decide who is

going first. They are the batter and will use

the 4 square bags. The fielder will get the 2

round bean bags.

Game Play: Big League Bagball may be

played with either 2 or 4 players divided into 2

teams. Players position themselves 10 - 15 feet away from the game

board.

The game consists of innings. During an inning, each player gets to be on

offense (as a batter) and defense (as a fielder). The batter begins and

tosses

one of the four square bags at the game board. If a bag successfully

lands

in a net a hit is awarded and base runners move/advance based on

the following:

• Single Net = 1 runner on first base.

• Double Net = 1 runner on second base.

• Triple Net = 1 runner on third base.

• Home Run Net = 1 run scored plus 1 run for any runners on base.

Runners advance bases when the batter lands a hit. The number of bases

advanced is equal to the number of bases the hitter receives. For example,

a batter has a runner on second base and then lands a bag for a single on

his next throw. The runner on second advances to third and the hitter has

a new base runner on first base. A bag that lands in a net marked “out,” or

misses the game board completely is an out against the batter. The batter

throws one bag after another until he either runs out of bags to throw or

receives 3 outs.

The opponent (fielder) takes the two round bags and can try to cancel out

any of the plays that happen on offense. After any throw, EXCEPT a home

run, the fielder may step in to cancel out the batter’s hit. To do this the

fielder must throw a bag successfully into one of the “out” nets. If the

fielder is successful, the batter’s play is canceled and an out is given to

the batter. No runners advance. For example, the batter has a runner on

second base and then lands a bag for a single on his next throw. The

fielder steps in and throws a bag for an out. That “single” base runner’s

play has been cancelled and the batter now has an OUT ( The runner on

second does not advance to third).

After a batter receives 3 outs or throws all 4 of their bags, the offense and

defense switch and repeat the previous steps. When both players have

had a chance at offense and defense, the inning is over and a new one

begins. After each inning, move the “inning marker” on the right side to

the next inning until all nine have been played.After nine innings the game

MADE IN CHINA

Questions or comments? Write to us at the address above, call 1.800.486.9787

or email [email protected] • www.fundexgames.com

In an effort to continually improve our products, items may vary from those shown.

Item No. 0726–00–11

IMPORTANT: To change games, flip the game board

over and rotate the legs to the opposite side.

Step 3: Insert 2 (2) side connectors into the openings on

the side pockets connecting them to the (A) tubes.

(2) (2)

(1)

Step 5: Connect 1 (3) corner connector to the (B) tube.

Slide 1 (C ) tube into the lower pocket on the game board

until it connects firmly to the (3 ) corner connector.

Step 4:

Insert 2 (B ) tubes into the side pockets on the

game

board. Fit the tubes onto the (2 ) side connectors.

(4)

(3)

(B) (C)

Step 2: Rotate, or bend out slightly, the 2 (A) tubes that

were just inserted and place the (1 ) center connector into

one of the open ends. Rotate the 2 (A) tubes back together

making sure the center connector fits tightly inside the tubes.

[Note: This is a very tight fit. Please bend carefully.]

Step 6: Insert 1 (3 ) corner connector to the open end of the

(C ) tube. Rotate, or bend out slightly, the (3) connector

that was just inserted. Line it up with the open end in the

(B ) side tube and press firmly until the pieces connect.

[Note: This is a very tight fit. Please bend carefully.]

(2)

Step 7:

Insert 2 (D ) tubes onto the open stems of the

2 (2 )

side connectors already on the game board.

Insert 2 (4 ) feet into the open ends of the ( D) tubes.

Step 8:

Snap the 3 (5 ) scoring markers onto the game

board as shown above. Place in the locations shown.

(5) (5)

(5)

Assembly:

Included in the box are the following pieces:

[The number or letter inside the ( ) is how the

pieces will be referred to in the instructions.]

•1 game board

• 2 curved tubes (A)

•2 tubes 14.25” long (B)

•1 tube 19.75“ long (C)

•2 tubes 18” long (D)

•1 center connector (1)

•2 side connectors (2)

•2 corner connectors (3)

•2 feet (4)

•3 scoring markers (5)

(D)

(A)

Step 1: Insert 2 (A ) tubes into the opening on the top

pockets of the game board.

(3)