DMI Sports HT505 User manual

DMI Sports For Customer Service Call 1.800.399.4402
1.800.399.4402
FAX: [phone]
Please have your model number when inquiring about parts.
Or write to:
DMI Sports
Customer Service
375 Commerce Drive
Fort Washington PA, 19034
Please visit our web site at:
www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.
Congratulations on the purchase of your new DMI Sports
Table hockey table. Our products are designed and
manufactured to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,
PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:
Your Model Number
_______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
HT505
007100
6

DMI Sports For Customer Service Call 1.800.399.4402
Please Keep Your Instructions!
(You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this table. Please refer to the
Parts Identifi er on the following page and be sure that all parts have been included. Although extreme-
ly rare, occasionally a part may be missing. If you are missing a part, or if you have any questions, please
call our customer service department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and
5:00pm E.S.T; or you can reach us at: www.dmisports.com.
Do not return the game to the store. Please contact us fi rst at: 1.800.399.4402 or on our website at:
www.dmisports.com.
IMPORTANT!
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS HOCKEY TABLE
DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
TOOLS REQUIRED FOR ASSEMBLY:
PARTS IDENTIFIER
HARDWARE PARTS
• Multi-Wrench
-
Included
•
Phil
lips Head Screw Driver
-
Not Included
•
Allen
Tool
-
Included
H
1
H
2
H
3
Qty.
8
Qty.
8
Qty.
8
A1
A2
A3
Pusher
RPHT-PUSH
Goal Flex
™
Puck
RPHT-PUCK
Qty.
4
Qty.
4
Qty.
4
ACCESSORY
PARTS
Multi-Wrench
RPHT-
M
WRENCH
H4
Qty.
16
ASSEMBLY
PARTS
P
1
P
2
Qty.
1
Qty.
4
P
3
Qty.
2
P
4
Qty.
2
H
6
Qty.
2
H
5
Qty.
16
P5
Qty.
4
Pusher Felt
RPHT-FELT
A
4
Qty.
1
Allen
Tool
RPHT-TOOL
A5
Qty.
1
5/16 x 1-3/4”
Bolt
RPHT505-BOLT
5/16”
Flat
Washer
RPHT505-WASH
1/4 x 1-1/8” Bolt
RPHT505-1/4BOLT
5
/16 Nut
RPHT505-NUT
1
” Screw
RPHT505-SCREW
1/4 Washer
RPHT505-1/4WASH
Main Frame
RPHT505-FRAME
Leg
RPHT505-LEG
Go
al Flex80™ Console
RPGF80-CONSOLE
Leg Leveler
RPHT505-
LEV
Inner Leg Panel
Inner Leg Panel
Inner Leg Panel
RPHT505-IPANEL
P6
Qty.
1
Out
er Leg Panel
er Leg Panel
er Leg Panel
er Leg Panel
RPHT505-OPANEL

DMI Sports For Customer Service Call 1.800.399.4402
STEP
1
.
Assemble the
Leg Assembly
by attach
ing Leg (P2) t
o the Inner Leg Panel (P3) and Outer Leg Panel (P4)
using Bolt (
H
4
) and Washer (H5) as s
hown in Figure 1.1.
ASSEMBLY
P2
P2
STEP
2
.
Attach
Leg Assembly (P2) to the
Main Frame (P1) using Bolt
(H1), Washer (H2) and Nut (H3) as shown in Figure 2.1. Once the
legs are
secured, attach the Leg Lev
eler (P4).
Once the leg assembly and leg levelers are properly attached,
with two adults carefully
lift and turn the table over.
P4
FIG. 2.1

DMI Sports For Customer Service Call 1.800.399.4402
STEP
3
.
Once the table is turned over,
caref
ully pull the goal rail connector wires up through
the hole of the side rail a
nd connect them t
o the Console (P3). Using Screw (H4) attach
the console to the side rail as shown in Figure 3.1
.
DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
ASSEMBLY
H
4
H
4
P3
FIG. 3.1
Apply Felt Pads (A2) to the bottom of your Pushers (A1)
.

REF
H1
H2
H3
H4
H5
H6
A1
A2
A3
A4
A5
P2
P3
P4
P5
P6
PART#
RP
HT
50
5
-BOLT
RP
H
T
50
5
-WASH
RP
HT
50
5
-
NUT
RP
HT
50
5
-
1/4BOLT
RPHT505-15WASH
RPHT505-SCREW
RP
HT
-PUSH
HTHT
RPHT-FELT
RP
HT
-GFPUCK
HTHT
RP
HT-MW
RENCH
RPHT-TOOL
RPHT505-LEG
RPHT505-IPANEL
RPHT505-OPANEL
RPHT505-OPANEL
RPHT505-LEV
RPHT505-LEV
RP
RP
GF80-CONSOLE
GF80-CONSOLE
DESCRIPTION
5/16” X 1-3/4” B
olt
5/16” Washer
5/16” Nut
1/4 x 1-1/8” Bolt
1/4 Washer
3/4” Screw
Pusher
Pusher Felt
Goal F
lex Puck
Multi-Wrench
Allen Tool
Leg
Leg
Inner Leg panel
Inner Leg panel
Outer Panel
Leg Leveler
Leg Leveler
Goal Flex
80 Console
UNIT
PRICE
TOTAL
AMOUNT
Subtotal:
PA Residents Add 6% State Sales Tax
:
Shipping and Handling Charges:
TOTAL:
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.
)
(e
a.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
PARTS RE-ORDER FORM
H
T
50
5
Table Hockey
DATE:
NAME:
ADDRESS:
CITY:
PHONE:
STATE:
ZIP CODE
:
Send this form along with your
check or money order payable to:
DMI SPORTS
375 Commerce Drive
Fort Washington, PA 19034
www.dmisports.com
.
75
.25
.
50
.
50
.25
.25
2.00
1.00
1.
50
2
.00
2.00
12.00
12.00
12.00
4.00
59.00
59.00
SHIPPING AND HANDLNG:
Up to $15.00 add $2.00 for S&H
Over $15.00 add $8.00 for S&H
QTY