Funsnap Capture 2 Gimbal User manual

Quick Start Guide • Průvodce rychlým spuštěním •
Sprievodca rýchlym spustením • Gyors üzembe
helyezési útmutató

2
English
3 - 16
Čeština
17 – 31
Slovenčina
32 – 45
Magyar
46 – 61
Alza.cz a.s.
Jankovcova 1522/53, 170 00 Prague 7
www.alza.cz

3
The product user guide contains product features, how to
use, and the operating procedure. Read the user manual
carefully to get the best experience and avoid unnecessary
damage. Keep this manual for future reference. If you have
any questions or comments about the device, please
contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Strictly observe the applicable laws and regulations at
the place of use. The device must not be used in
violation of applicable legislation or for illegal purposes.
The company Alza.cz a.s. bears no responsibility if the
device is used in violation of applicable legislation or for
illegal purposes. The user who violates these
regulations will be responsible for all consequences
caused by the purchase and use of this product.
Packing List
Gimbal Power Cable
Instructions &
Customer
Service Card

4
Introduction
The Capture 2 Gimbal is a three-axis handheld gimbal
specially designed for mobile phones. It assists mobile
phone shooting, effectively eliminating the external
jitter caused by the shooting process, and creating
stable and smooth images. The Capture 2 Gimbal
supports the horizontal and vertical position of the
mobile phone. the shooting angle of the mobile phone
can be adjusted manually and quickly by controlling the
button to meet the needs of daily shooting and film
production.
Using it with the Capture 2 APP, you can experience a
variety of photography functions such as hyperlapse,
smart tracking and panorama.
Download and Install the APP
Search for “Capture 2” on the App Store, or scan the QR
code and install the APP on your mobile phone.
App Store
Applications
Treasure
Google Play

5
Product Showcase
1
Mobile
Phone
Holder
2Handle 3 Tilt Motor
4
Adjustable
Arm
5
Pan
Motor
6
Mode
Indicator
7 Battery
Indicator 8
Power /
Mode
Button
9 Joystick
10
Shooting
Button
11
Trigger
Button
12
Zooming
Wheel
13 Micro USB 14
Roll
Motor

6
Charging
To charge the Capture 2 Gimbal, connect the Gimbal to
the charger via power cable. The charging time is about
2.5 hours and the max run-time is 12 hours.
The red LED flashes when charging and the green LED
is always on when the charging is completed.
You can check the battery status via the battery
indicator. The green LED is on when the battery is fully
changed and the red LED is on when it is less than
30 %. When the red LED flashes, the battery condition
is in less than 10 %.
Battery Indicator
Micro USB
The data is obtained when
Capture 2 is used under
ideal condition and is for
reference only.

7
Operation Instructions
Mount the Mobile Phone
Please mount and balance the mobile phone when the
gimbal is powered off.
a. Place the mobile phone in the mobile phone
holder while pulling out the holder. It is
recommended to keep the mobile phone close to
the right.
b. Please mount and balance the mobile phone
when the Gimbal is powered off.
Install your phone correctly

8
Turn On/Off
ON: Press the power button for 3
seconds after balancing the phone.
OFF: Press the power button for 3
seconds to power off.
Connect to the APP
Power on the Gimbal, enable Bluetooth on your mobile
phone, start up the Capture 2 APP, then search for the
Gimbal in your Bluetooth.
Controls
Battery Indicator
Mode Indicator
Power Lamp
Operating Mode
Joystick
Pan or tilt the mobile phone.
Power / Mode Button
Press for 3 seconds to power on/off
and tap once to switch the mode.
Shooting Button
Tap once to take a photo. Press for 2
seconds to record a video.
Trigger Button
You can define the function of Trigger
Button in the APP.
Zooming Wheel
Rotate it to zoom in or out. You can
define a specific function in the APP.

9
Mode Description
Button
Mode
Indicator
Status
Mode /
Status
Description
Power
on
default
Green Full-follow
mode
The roll axis is
locked, the pan
axis and the tilt
axis follow the
handle movement.
Tap
Mode
Button
Red Lock Mode
All the axes are
locked and the
shooting scene is
locked in the
current direction.
Tap
Mode
Button
Blue Pan-follow
Mode
The tilt and the roll
axes are locked
and the pan axis
follows the handle
movement.
Note: Click the power button to cycle the above three
modes successively, and the current mode can be identified
according to the colour of indicator light and the state of
cradle head.
Define
Gimbal
Mode in
APP
Green PhoneGo
Mode
Define the function
of Trigger Button
as PhoneGo mode
in the APP, press
Trigger Button for
instant scene
transition-
Red FPV Mode
Switch the setting
mode in APP to
FPV mode, and the
roll axis follows the
handle movement
to capture the
scene with rotating
effect.

10
Calibration
If there is an offset after power on, please place the
mobile phone on the Gimbal, connect to the APP via
Bluetooth, tap the Calibration Button while the Gimbal
remains still and wait for 15 seconds. During this time,
the Gimbal will automatically calibrate and sleep, and
restart in seconds.
Video Instructions
Scan the code to view the video instructions.

11
Parameters
CMIIT ID
XXXXXXXXX
Dimension
295 × 113 × 72 mm
Weight
500 g
Model No.
Capture 2
Max Control Speed
5°/s
Mobile Phone Width
55-90 mm
Controllable Models
Mobile phones <6.5”
GoPro camera 4/5/6/7
Max Payload
250 g
Input Voltage
5 V
Battery Capacity
18650 LiB 2200 mAh×2
Operation Voltage
100 mA – 2000 mA
(standard 150 mA)
Operation
Temperature
0~40 °C
Operation Time
12 hours
Charging Time
2.5 hours
Accessory Interface
¼” Threaded interface

12
Disclaimer and Warning
Congratulations on purchasing Capture 2 Gimbal.
The information in this document affects your safety
and your legal rights and responsibilities. Read the
document carefully to ensure proper use and setting
before use. Failure to read and follow instructions and
warnings in the document may result in serious injury
to yourself or others, damage to your Capture 2 Gimbal
product or damage to other object in the vicinity.
Funsnap Technology reserves the right of the final
interpretation of the document. All contents are subject
to change without further notice. Please visit Funsnap
Technology (www.fun-snap.com) for latest product
information.
By using this product, you hereby signify that you have
read this disclaimer and warning carefully and that you
understand and agree to abide by the terms and
conditions herein. Funsnap accepts no liability for
damage, injury or any legal responsibility incurred
directly or indirectly from the use of this product. The
user shall observe safe and lawful practices including,
but not limited to, those set forth in the document.

13
Safety Guidelines
1. Capture 2 Gimbal is not water-resistant. DO NOT
allow the product to come into contact with any
kind of liquid. DO NOT leave product out in the
rain or near a source of moisture. DO NOT drop
the product into water. If the inside of the battery
comes into contact with water, chemical
decomposition may occur, potentially resulting in
the battery catching on fire, and may even lead to
an explosion.
2. Put out any product immediately so as not to
cause serious damage.
3. The product should be used in temperatures from
0 °C to 40 °C. DO NOT heat this product. Too high
or too low temperature may shorten the service
life of the product.
4. Please pay attention to the safety of the product.
DO NOT crash, strike or drop the product. DO
NOT place heavy object on the product.
5. Never disassemble the product in any way or the
battery may leak, catch fire or explode.
6. Discharge the battery to 40%~65% if it will NOT be
used for long periods of time. DO NOT store the
product fully discharged for long periods of time,
otherwise it will over discharge and lead to
permanent damage. Discharge every 3 months or
so to maintain battery active.

14
Warranty Conditions
A new product purchased in the Alza.cz sales network
is guaranteed for 2 years. If you need repair or other
services during the warranty period, contact the
product seller directly, you must provide the original
proof of purchase with the date of purchase.
The following are considered to be a conflict with
the warranty conditions, for which the claimed
claim may not be recognized:
•Using the product for any purpose other than
that for which the product is intended or failing
to follow the instructions for maintenance,
operation and service of the product.
•Damage to the product by a natural disaster, the
intervention of an unauthorized person or
mechanically through the fault of the buyer (e.g.
during transport, cleaning by inappropriate
means, etc.).
•Natural wear and aging of consumables or
components during use (such as batteries, etc.).
•Exposure to adverse external influences, such as
sunlight and other radiation or electromagnetic
fields, fluid intrusion, object intrusion, mains
overvoltage, electrostatic discharge voltage
(including lightning), faulty supply or input
voltage and inappropriate polarity of this voltage,
chemical processes such as used power supplies,
etc.
•If anyone has made modifications, modifications,
alterations to the design or adaptation to change
or extend the functions of the product compared
to the purchased design or use of non-original
components.

15
EU Declaration of Conformity
Identification data of the manufacturer's /
importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170
00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Fun-Snap stabilator
Model / Type: Capture 2 Gimbal
The above product has been tested in accordance
with the standard (s) used to demonstrate
compliance with the essential requirements laid
down in the Directive (s):
Directive No. (EU) 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 23.11.2020

16
WEEE
This product must not be disposed of as normal
household waste in accordance with the EU Directive
on Waste Electrical and Electronic Equipment (WEEE -
2012/19 / EU). Instead it shall be returned to the place
of purchase or handed over to a public collection point
for the recyclable waste. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of this product. Contact
your local authority or the nearest collection point for
further details. Improper disposal of this type of waste
may result in fines in accordance with national
regulations.

17
Uživatelská příručka k produktu obsahuje funkce
produktu, způsob použití a provozní postup. Přečtěte si
uživatelskou příručku pozorně, abyste získali ty nejlepší
zkušenosti a předešli zbytečnému poškození. Příručku
uschovejte pro další použití. Pokud máte jakékoliv
dotazy či připomínky ohledně produktu, prosíme,
obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆[phone]
Přísně dodržujte platné zákony a předpisy v místě
použití. Zařízení nesmí být používáno v rozporu s
platnou legislativou nebo pro nezákonné účely.
Společnost Alza.cz a.s. nenese žádnou odpovědnost,
pokud je zařízení používáno v rozporu s platnou
legislativou nebo pro nezákonné účely. Uživatel, který
poruší tyto nařízení, bude zodpovědný za veškeré
důsledky způsobené zakoupením a využíváním tohoto
produktu.
Obsah balení
Stabilizátor
Capture 2 Napájecí kabel
Instrukce
& karta
zákaznického
servisu

18
Představení produktu
Capture 2 je tříosý ruční stabilizátor speciálně navržený
pro mobilní telefony. Pomáhá při fotografování z
mobilního telefonu, účinně eliminuje externí chvění
způsobené procesem fotografování a vytváří stabilní a
plynulý obraz. Capture 2 podporuje vodorovnou a
svislou polohu mobilního telefonu. Úhel snímání
mobilního telefonu lze nastavit rychle, tak aby
vyhovoval potřebám každodenního fotografování a
filmové produkce.
Jeho použití s aplikací Capture 2 vám umožní vyzkoušet
celou řadu fotografických funkcí, jako je hyperlapse,
inteligentní sledování a panorama.
Instalace aplikace
Vyhledejte „Capture 2“ v App Storu nebo naskenujte QR
kód a nainstalujte si aplikaci do mobilního telefonu.
App Store Poklad
aplikací Google Play

19
Prezentace produktu
1
Držák
mobilního
telefonu
2
Rukojeť
3
Naklápěcí
motor
4
Nastavitelné
rameno
5
Otáčecí
Motor
6
Indikátor
režimu
7
Indikátor
baterie
8
Tlačítko
On/Off/
Režim
9
Joystick
10
Tlačítko pro
fotografování
11
Spoušť
12
Kolečko
přiblížení
13
Micro USB
14
Rolovací
Motor

20
Nabíjení produktu
Chcete-li nabít Capture 2, připojte ho k nabíječce
pomocí napájecího kabelu. Doba nabíjení je přibližně
2,5 hodiny a maximální doba provozu je 12 hodin.
Při nabíjení bliká červená LED kontrolka a zelená LED
kontrolka svítí vždy, když je nabíjení dokončeno.
Stav baterie můžete zkontrolovat pomocí indikátoru
baterie. Zelená LED kontrolka svítí, když je baterie
zcela vyměněna, a červená LED kontrolka svítí, když je
její kapacita nižší než 30%. Když červená LED kontrolka
bliká, stav baterie je nižší než 10%.
Indikátor baterie
Micro USB
Data o stavu baterie se
získají pouze, když je
Capture 2 používaný za
ideálních podmínek.