Furinno FB19821F User manual

ASSEMBLY INSTRUCTIONS
FURINNO BED FRAME
MODEL: FB19821F
FB19821F20190904 PAGE 1/3
Tool Required
30 min
x 2
IMPORTANT NOTES:
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order
to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble the product on packaging cardboard to prevent
scratch or damage.
5. Using uncompatible hardware might cause damage to the
product. DO NOT FULLY-TIGHTEN the nut until all nuts
are ready assembled.
* This unit has been designed to support maximum loads:
Exceeding these load limits could cause sagging,
instability, product collapse, and/or serious injury.
* Keep all hardware parts out of reach of children.
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
TWIN & TWIN XL: 200 lbs, FULL: 400 lbs,
QUEEN: 500 lbs, KING & CAL.KING: 600 lbs

1
SLAT
SUPPORT LEGS
with adjustable feet
4PCS
4PCS
(A)
(B)
NOTE:
Some parts packed inside the
zippered compartment at the
back of the headboard.
PAGE 2/3
5 10 8 9 2 3 4 6/7 6/7 hardware
5
4
10
6
7
89
2
3
10
8
6
7
10PCS
M4 X 100mm
9
10
10

PAGE 3/3
10
9
9
4
3
2
Do not fully tighten screws
until assembly is complete
and the bed is level.
8
6
7
Do not fully tighten screws
until assembly is complete
and the bed is level.
5
4
J
C
F
G
1
3
2
R
L
Make sure the cleat is
on outside edge.
Back