Furinno FNBJ-22033 User manual

MODEL:
Furinno B&W U-Storage Side Table
FNBJ-22033
STEP 3
Install Adjustable Leg(3) to the bottom of the U-Shaped Support(C).
(3)x 4pcs
10kg
10kg
A
B
C
C
www.furinno.com
Assembly Instruction
Recomm. 1 Person
Approx. 20 minutes
Tools Required
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Recommended Maximum Weight

(2)x 4pcs
1
2
3
4
4pcs
8pcs
4pcs
1pcs
A
B
C
C
C
D
D
D
D
1pcs
1pcs
2pcs
2pcs
STEP 1
1.1 Insert Roound Bar(4) into the Oxford Cloth, as shown in Pic 1.
1.2 Tighten U-Shaped Support(C) to Bottom Panel(B) and Round Bar(D)
with Screw/Dowel Nut(1) and Screws(2).
STEP 2
Attach Top Panel(A) to U-Shaped Support(C)
with Screws(2).
Top Panel
Screw/DowelNut
Screw Bottom Panel
U-Shaped Support
Round Bar
(1)x 4pcs
(2)x 4pcs
Adjustable Leg
Oxford Cloth
Pic 1
Pic 2
A
A
B
B
4
4
No Hardware List Qty No QtyParts List
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Note:
Dowel nuts are inserted
from the bottom of the
Bottom Panel with the
nut hole facing outwards
to receive Screw.