Furinno FNAK-11172 User manual

Assembly Instruction
Customer Service
Tel/Fax: [phone]
Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)
Email: [email protected]
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
www.furinno.com
8.1 Insert Cam-Lock Screw(3)on Panel(A).
8.2 Attach Panel(A)to L/R Side Panel(B,C)
with Cam-Long Screw/Nut(3).
STEP 8
Attach Back Cover Panel(F)to L/R Side
Panel(B,C).
STEP 7
Recommended Maximum Weight
Furinno Simple Design Bedside
3-Drawer Chest
FNAK1117220140506
MODEL : FNAK-11172
29.5”(W) x 22.3”(H) x 15.8”(D)DIMENSION :
15
*Unit in Pound(lbs)
Fix Back Cover Panel(F)using Short
Screw(2).
STEP 9
(A)
(B)
(C)
(3)x4pcs
(F)
(2)x4pcs
(F)
(B)
(C)
(A)
(3)x4pcs
Tool RequiredTool RequiredNo Tools Required
Recomm. 1 PersonRecomm. 2 Person
Approx. 5 minutesApprox. 15 minutesApprox. 20 minutesApprox. 30 minutes

STEP 5
5.1 Attach Slider(4)on L/R Side Panel(B,C)
using Short Screw(2),as shown.
5.2 Attach Cam-Lock Screw(3)on L/R Side
Panel(B,C).
Attach Panel(D,E,L)to L/R Side Panel(B,C)
using Cam-Lock Screw/Nut(3).
STEP 6
STEP 3
3.1 Slide Panel(K)into L/R Side Panel(H,I).
3.2 Attach Front Panel(G)to Panel(H,I)
using Cam-Lock Screw/Nut(3).
Attach Slider(4)at the bottom of L/R Side
Panel(H,I)using Short Screw(2).
Note: Attach slider according to the side.
STEP 4
STEP 1
Insert Cam-Lock Screw(3)into Drawer Front
Panel(G).
Attach Panel(J)to L/R Side Panel(H,I)
using Long Screw(1).
STEP 2
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
12pcs
28pcs
28pcs
A 1pcs
Top Panel
Cam-Lock Screw/Nut
No Hardware List Qty No QtyParts List
Long Screw
Short Screw
4 6pcs Slider
B
C
1pcs
1pcs
Right Side Panel
Left Side Panel
D
E
F
1pcs
1pcs
1pcs
Back Cover Panel
Front Support Panel
Back Bottom Panel
G
H
3pcs
3pcs
Drawer Left Side Panel
Drawer Front Panel
I
J
K
3pcs
3pcs
3pcs
Drawer Bottom Panel
Drawer Right Side Panel
Drawer Back Panel
L 1pcs
Back Support Panel
G
H
I
J
K
A
B
D
L
E
F
C
(3)x4pcs
(G)
(B)
(C)
(D)
(L)
(E)
(1)x4pcs
(H)
(J)
(I)
(G)
(H)
(I)
(K)
(J)
(3)x4pcs
(B&C)
Front Side
(2)x12pcs
(3)x12pcs
(4)
(2)x4pcs
(G)
(I)
(K)
(3)x12pcs