Furman PGP-S User manual

REMOTE POWER
SWITCHER, 60 A
PLUGLOCK-PRO
LOCKING OUTLET SYSTEMS
Furman Sound, Inc. ● 1997 South McDowell Blvd. ● Petaluma, CA 94954 USA
Phone: [phone] ● Fax: [phone] ● Web: www.furmansound.com
®
The PGP-S Power Switcher is a three circuit 60 Amp
Remote AC Power Switcher designed primarily for use with
Furman’s PlugLock-PRO Locking Outlet Systems, models
PGP-20 and PGP-60. It may also be used with any other
commercial or custom-built conduit-wired outlet strips.
The PGP-S is housed in a rugged, 6" x 6" x 4" steel
junction box with three heavy-duty 20 Amp relays. It features
easy-to-connect Phoenix terminal blocks that allow remote
switches and LED indicators to be connected via safe,
inexpensive, low voltage Class 2 wiring. If sequenced turn-on
and turn-off is required, the switching function can be provided
by a Furman PowerLink Remote AC Power Sequence
Controller or ASD-120 Sequenced Power Distro. Remote
switching can be controlled by using any Furman power
control product, including the RS-1, RS-2, PS-8R and PS-PRO
in addition to the ASD-120.
The PGP-S is designed specifically for mounting at the
bottom of a PGP-20 or PGP-60, and also serves as a main
junction box for all power interconnects. It includes an internal
12 VDC supply, and can be controlled from remote locations
using the PowerLink, ASD-120, or, for simpler jobs, the
Furman RS-1 or RS-2 Remote System Control Panels. The
RS-1 provides a maintained key switch; the RS-2 has a
momentary switch. In larger installations, multiple PGP-S’s
may be controlled by a single switch closure, or by a
PowerLink or ASD-120 control signal. Please consult a
Furman service professional for specific installation and
application assistance.
All four sides of the enclosure have multiple knockouts to
accomodate every job. The PGP-S is designed for permanent
installation and accomodates conduit sizes from 3/4" through
1.5". Local codes should be checked for wiring requirements.
Use of a licensed electrical contractor is recommended for the
best and safest installation.
PGP-S
MODEL PGP-S
MODELS PGP-20, PGP-60
REMOTE POWER
SWITCHER, 60 A
PGP-S FEATURES
60 Amp capacity
Three heavy-duty 20 Amp relays
Housed in a rugged 6” x 6” x 4” steel junction box
Internal 12 VDC supply
Terminal strip allows Remote Control
Remote switching can be controlled by using any Furman
power control product
Mounts to the bottom of a PGP-20 or PGP-60; may also
be used with any other commerical or custom-built
conduit-wired outlet strips
Three Year Limited Warranty

PGP-60 FEATURES
60 Amp capacity
Three 20 Amp circuits (12 AWG wiring on each)
Twenty-four Edison outlets (NEMA 5-15), eight per circuit
Isolated grounds per 20 Amp circuit
Supplied with twelve PlugLock clamps to securely lock
plugsand wall warts, additional clamps available
60” tall
Can be mounted for top or bottom 3/4” conduit connection
Optional sequencing relays available
Extremely versatile mounting ears
Cost effective
Ability to add local circuit breaker protection to each circuit
Three Year Limited Warranty
PGP-20 FEATURES
Two 20 Amp circuits (12 AWG wiring on each)— four
outlets on one circuit and eight outlets on the other
Can be mounted for top or bottom 3/4” conduit connection
Twelve Edision outlets, and only 30” tall
Includes eight PlugLock clamps
Extremely versatile mounting ears
Cost effective
Three Year Limited Warranty
DESCRIPTION
The PlugLock-PRO Locking Outlet Systems provide
unprecedented ease, versatility and reliability for professional
rack applications.
The PlugLock-PRO 60 (PGP-60) provides twenty-four
Edison outlets in its 60” tall chassis, and is designed primarily
for vertical mounting in equipment racks. The PGP-60 is rated
at 60 Amps, divided into three 20 Amp circuits to provide
flexibillity for multiple and varying applications. The included
3/4” nipple mount allows an electrical junction box to be
mounted either at the top or bottom of the PGP-60. (The photo
shows a typical installation; please note that the junction box is
not included. Contact Furman for junction box options.) Power
sequencing relays are also available. A local circuit breaker
can be easily added to each of the 20 Amp circuits if
necessary.
The PlugLock-PRO 20 (PGP-20) is rated at 40 Amps. The
PGP-20 provides twelve Edison outlets (eight on one circuit,
four on the other) in a chassis that is only 30” tall and can be
mounted vertically in smaller racks and other locations.
Both PlugLock-PRO models feature rugged, all-metal
construction, and include a set of Furman’s metal PlugLock
clamps that securely lock any plug or wall wart into place for
reliable operation. The PGP-60 comes with twelve clamps and
the PGP-20 comes with eight. Additional clamps are available
separately from Furman.
2-0120 963011-2802 A
PLUGLOCK-PRO LOCKING
OUTLET SYSTEMS
PGP-20 PGP-60
AVAILABLE FROM:
OPTIONS
Other junction boxes, control relays and
circuit breakers. Please contact Furman
for details.
Additional PlugLock outlet clamps and
thumbscrews, six per package. Order
part number BR-6.
THREE YEAR LIMITED WARRANTY
The Furman PGP-S and PlugLock-PRO’s
(PGP-20 and PGP-60) are protected by a
limited three-year
warranty covering
defects in materials
and workmanship.
MODELS PGP-20 AND PGP-60
The PGP Series is manufactured in the United States of America