Furrion FMS5L2A-BL User manual

5” two-way Outdoor Marine Speaker
Owner’s manual
Thank you for purchasing a Furrion® auto-
motive loudspeaker component system.
We’ve organized this manual to make your
installation as simple and trouble-free as
possible. Please read it thoroughly before
proceeding. Remember to keep your sales
receipt and this manual in a safe place so
both are available for future reference.
Installation
1. Select a suitable position that is not
susceptible to moisture.
2. Mark and cut an opening in the wall
according to the dimensions outlined in
the illustration below. (Fig. A)
4.5”
Fig. A
Model: FMS5L2A-BL / FMS5L2A-PS
FMS5L2-BL / FMS5L2-PS
IMPORTANT
For your safety, please read all
instructions in this manual carefully
before installation and use. Keep
this instruction manual for future
reference. This will ensure safe use
and reduce the risk of injury. If you
have any further questions regarding
our products, please contact us at
[email protected]
3. Connect the speaker LED wire to a 12V
DC power supply and insulate the joints
with twist caps. (Fig. B)
Fig. B
4. Twist the speaker LED wires and LED
ring wires together and connect to a 12V
DC power supply (for FMS5L2A-BL/PS
only). (Fig. C)
Fig. C

Furrion Innovation Center & Institute of Technology
●52567 Independence Ct., Elkhart, IN 46514, USA ●Toll free:1-888-354-5792
●Email: [e-mail]
Global Headquarters
Units 614-615, Level 6, Core D, Cyberport 3, 100 Cyberport Road, Hong Kong
● Email: [e-mail]
©2007-2017 Furrion Ltd. Furrion and the Furrion logo are trademarks
licensed for use by Furrion Ltd. and registered in the U.S. and other
countries.
FURRION.COM
IM-FMS5LXX-V1.3
5. Follow the + and - polarity symbols
molded on the speaker to connect the
speaker to the amplier. (Fig. D)
Fig. D
6. Fit the speaker or speaker with LED ring
in the hole and secure with 4 screws (not
included). (Fig. E)
NOTE: Make sure the Furrion logo is
facing up when installing.
Fig. E
Circuit Diagram
LED RingU=12V
Woofer Speaker
Tweeter Speaker
Care and Maintenance
The loudspeaker grilles may be cleaned
with a damp cloth. Do not use any cleaner
or solvents on the grilles or the speaker
cones.
This product is designed for mobile applica-
tions and is not intended for connection to
the mains.

Furrion Innovation Center & Institute of Technology
●52567 Independence Ct., Elkhart, IN 46514, USA ●Toll free:1-888-354-5792
●Email: [e-mail]
Global Headquarters
Units 614-615, Level 6, Core D, Cyberport 3, 100 Cyberport Road, Hong Kong
● Email: [e-mail]
©2007-2017 Furrion Ltd. Furrion and the Furrion logo are trademarks
licensed for use by Furrion Ltd. and registered in the U.S. and other
countries.
FURRION.COM
IM-FMS5LXX-V1.3
5. Follow the + and - polarity symbols
molded on the speaker to connect the
speaker to the amplier. (Fig. D)
Fig. D
6. Fit the speaker or speaker with LED ring
in the hole and secure with 4 screws (not
included). (Fig. E)
NOTE: Make sure the Furrion logo is
facing up when installing.
Fig. E
Circuit Diagram
LED RingU=12V
Woofer Speaker
Tweeter Speaker
Care and Maintenance
The loudspeaker grilles may be cleaned
with a damp cloth. Do not use any cleaner
or solvents on the grilles or the speaker
cones.
This product is designed for mobile applica-
tions and is not intended for connection to
the mains.

Furrion Innovation Center & Institute of Technology
●52567 Independence Ct., Elkhart, IN 46514, USA ●Toll free:1-888-354-5792
●Email: [email protected]
Global Headquarters
Units 614-615, Level 6, Core D, Cyberport 3, 100 Cyberport Road, Hong Kong
● Email: suppor[email protected]
©2007-2017 Furrion Ltd. Furrion and the Furrion logo are trademarks
licensed for use by Furrion Ltd. and registered in the U.S. and other
countries.
FURRION.COM
IM-FMS5LXX-V1.3
5. Follow the + and - polarity symbols
molded on the speaker to connect the
speaker to the amplier. (Fig. D)
Fig. D
6. Fit the speaker or speaker with LED ring
in the hole and secure with 4 screws (not
included). (Fig. E)
NOTE: Make sure the Furrion logo is
facing up when installing.
Fig. E
Circuit Diagram
LED RingU=12V
Woofer Speaker
Tweeter Speaker
Care and Maintenance
The loudspeaker grilles may be cleaned
with a damp cloth. Do not use any cleaner
or solvents on the grilles or the speaker
cones.
This product is designed for mobile applica-
tions and is not intended for connection to
the mains.