Futtura CL1H1V User manual

Red & Green Beam Cross Line Laser

1
OPERATING THE UNIT
Pendulum Lock
The 1V1H Red beam laser level is a precision instrument and should be treated
with care. When not in use, the pendulum should always be in the Off position
(Figure 1). Locking the pendulum allows the Cross Line Laser to better withstand
vibration and trauma incurred during transportation or if the unit is dropped.
Locked Line Angle
In the locked line angel position (figure 2), the pendulum is in the locked position
and will not automatically level. When in the locked line position, both two laser
lines will be on and flash slowly. The Lock/Level LED will turn red.
Figure 1
Figure 2

2
Automatic Leveling
When the pendulum is unlocked (figure 3), the pendulum is free to automatically
level, In order for the Cross Line Laser to automatically level, the base of the unit
needs to be within 4°of level.
When the pendulum is unlocked and the Cross Line Laser is within 4°of level, the
unit will be in automatic leveling range, in this situation the Lock/Level LED will
turn green and laser lines in a continuous lighting.
Should the base of the unit be outside the 4°leveling range the laser beam will
start with a quick flash. In the meanwhile the Lock/Level LED will turn red.
Low Battery Alarm:
The Red battery LED will be on when the laser is turned on. It will keep flashing
slowly when the working voltage of laser is below 4.4V. At this situation the
batteries are required to be replaced. Laser will shut off itself when the voltage is
below 3.9V.
Figure 3

3
Keypad Panel:
Pulse on/off
Pulse LED
Lock/Level LED
Lock:Red, Levelled:Green
Battery/
Low Voltage LED
Line options

4
What is included:
1. Instrument
2. Laser Plate
3. Alkaline batteries
4. Magnetic bracket
5. User manual
6. Rotatable base
7. Pouch(Optional)
8. Blow Mould Carry Case(Optional)
9. Mini Tripod(Optional)

5
SPECIFICATION:
Accuracy of horizontal line
± 2mm@5m
Accuracy of vertical line
± 2mm@5m
Leveling Range
4°
Working Range/With Detector
15m/60m with detector
Tripod Thread
1/4" & 5/8”
Laser Type Red Beam
Laser Type Green Beam
635 nm, laser class II
515-520nm, laser class II
Operating Temperature
-10℃to 50℃
Storage Temperature
-20℃to 60℃
Dimension
123 x 65 x 99/cm3
Continuous Working Time Red Beam
Continuous Working Time Green Beam
≥10hour
≥8hour