FUXTEC CTL900 Product information sheet

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
1

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
2
Content
1. Scope of delivery: ............................................................................................................................ 4
2. Assembly instruction ....................................................................................................................... 5
2.1 Mounting the front wheels/swivel wheels.................................................................................... 5
2.2 Mounting the rear wheel axle ....................................................................................................... 6
2.3 Fixing the rear wheels ................................................................................................................... 6
2.4 Assembly of the roofing ................................................................................................................ 6
2.5 Attaching the rear bag ................................................................................................................... 8
3. Intended use .................................................................................................................................... 8
3.1. Removing and attaching the protective cover ............................................................................. 8
3.2 Unfolding the wagon ..................................................................................................................... 9
3.3 Folding the wagon ....................................................................................................................... 10
3.4 Adjusting the push handle and pull bar ...................................................................................... 11
3.5 Moving the wagon ....................................................................................................................... 11
3.6 Operating and releasing the parking brake ................................................................................. 12
3.7 Use of the roofing ........................................................................................................................ 12
3.8 Use of safety belts ....................................................................................................................... 13
3.9 Removing the fabric cover........................................................................................................... 13
3.10 Maintenance and care ............................................................................................................... 14
4. Care instructions ................................................................................................................................ 15
5. Warranty ........................................................................................................................................ 15
6. Warnings and safety instructions ...................................................................................................... 16

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
3
Original FUXTEC CTL-900 Folding/Foldable Wagon
Congratulations on your original FUXTEC wagon.
To make you and your child feel safe when using the FUXTEC CTL-900 wagon, you have chosen a
high-quality product from FUXTEC and thus created an excellent choice. High-quality manufacturing
and continuous, strict quality controls assure you that you will enjoy your FUXTEC wagon for a long
time.
After receiving: Please check immediately, that the wagon is delivered in full. Are parts missing? Also,
please check all functions of the wagon carefully and report any problems within the reporting
period. In this case, our customer service will be happy to help you.
You can contact us directly at [email protected].
Pull bar
R
emovable fabric roofing with
integrated mesh
S
pring
-
loaded
swivel wheels incl.
quick release
Telescopic rods
Suspended, removable
rear axle with parking
brake
Padded inlay
Highly stable
aluminium frame
R
emovable
rear bag
H
eight
-
adjustable
push handle
Rear wheels with quick
release
V
entilated shoe
compartment

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
4
1. Scope of delivery:
Aluminium frame + Fabric cover
Roof incl. carrying bag
Rear bag incl. shoe compartment
2 swivel front wheels
R
ear axle incl. parking brake
+ 2 rear wheels
Protective cover
Transport bag
-
roof
rack
Coolbox
-
closed
Coolbox
-
open

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
5
2. Assembly instruction
2.1 Mounting the front wheels/swivel wheels
S
tep
1
:
Place the front wheel on the bracket as shown.
Step 2:
Press the safety button and keep it pressed.
Step 3:
With the safety button pressed down, place the front wheel
onto the holder.
Step 4:
After the wheel is mounted, release the safety button.
5. step:
Repeat the process for the 2nd front wheel.
IMPORTANT NOTE
Please make sure that the wheels are properly locked
before each use.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
6
2.2 Mounting the rear wheel axle
2.3 Fixing the rear wheels
2.4 Assembly of the roofing
Step 1
:
Position the rear axle as shown
Step 2:
Press the rear wheel axle onto the frame until it
engages.
Step 3:
Please check carefully that the rear wheel axle is
engaged and then firmly connected to the frame.
Step 1
:
Pull the safety bolt as shown.
Step 2:
While holding the pulled out safety bolt, put the wheel
on the rear axle. When the wheel is in the desired
position, release the safety bolt.
Step 3:
Repeat the procedure for the 2nd rear wheel.
Step 1
:
Remove the two pairs of roof bars from the transport
bag.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
7
Step 2
:
Join the bars of a pair along the middle retaining
rubber band.
Step 3
:
Please place the attachments of the holding rods
diagonally on the telescopic rods - as shown in the
picture on the left.
"Top view" of the correctly positioned roof
bars.
Step 4
:
Stretch the fabric roof over the wagon using
the telescopic rods.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
8
2.5 Attaching the rear bag
3. Intended use
3.1. Removing and attaching the protective cover
Hook the rear bag into the horizontal frame struts
below the push handle as shown.
Step 1
:
Place the wagon in front of you as shown.
Step 2:
Loosen the two safety clips on the lower part of
the wagon
Step 3:
Open the velcro and pull the protective cover
upwards.
To attach the protective cover, proceed in the
reverse order.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
9
3.2 Unfolding the wagon
Step 1
:
Loosen the safety clip.
Step 2
:
Pull the wagon apart and lay the fabric over
the frame.
Fix the safety clip outside the aluminium
frame to prevent accidental folding of
the wagon during use.
:
Before folding, the safety clip
must be fixed inside the frame.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
10
3.3 Folding the wagon
Step 1
:
Remove the roofing and retract the
telescopic rods into the frame.
Step 2
:
Fix the safety clip inside the frame
as shown.
Step 3
:
Pull on the fabric tab shown to pull
the wagon together. Then press the
wagon together by hand.
Step 4
:
Close the safety clip. To reduce the
size of the wagon, you can also
easily pull the safety strap.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
11
3.4 Adjusting the push handle and pull bar
3.5 Moving the wagon
Step 1
:
Press both buttons on the push bar
at the same time to adjust the angle.
The handle can lock in different
positions.
Use the rear push handle to push
the wagon along paved paths. In
more difficult terrain, please use the
telescopic pull bar at the front end
of the wagon.
Step 2
:
To use the telescopic pull bar,
simply pull it out of the frame holder
by the handle.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
12
3.6 Operating and releasing the parking brake
3.7 Use of the roofing
The roof has a built-in net, with which you can see inside the car at any time.
Step 1: To expose the net, open the zip.
Step 2: Once the cover is completely open, it can be attached to the other end of the wagon using
the velcro fasteners at the corners.
To lock the brake, press it down.
Make sure that the brake rod
engages with the gear wheels of the
tyres when braking. To release the
lock, lift the brake lever.
Please make sure that you lock the parking brake when you put your child in or
take it out of the wagon.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
13
3.8 Use of safety belts
3.9 Removing the fabric cover
Insert the combined shoulder
belt/pelvis belt buckles
into the buckle to close the 5-point safety belt.
Adjusting the belt:
Adjust the belt by moving the belt adjusters on the
shoulder, lap and crotch straps to the required
position.
CAUTION! Always adjust the 5-point safety belt when
you change your child's sitting position.
Opening the belt:
Press the middle button on the buckle and pull the
combined shoulder belt/pelvis belt buckle tabs out of
the buckle.
IMPORTANT NOTE
Always use the safety belt system!
CAUTION! When the belt is on or open, its ends must not be within the reach of small children.
These are small parts and there may be a risk of suffocation.
Step 1
:
Open all plug connections on the
fabric cover.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
14
3.10 Maintenance and care
The product should be checked and cleaned regularly.
– Please regularly check all essential parts for damage. Make sure that the mechanical
components are working correctly.
– Please regularly check that all screws, rivets, bolts and other fastenings are tight.
– Do not use grease or oil for lubrication, but a silicone-based spray.
– Too heavy a load, improper folding or the use of unauthorised accessories can damage or
destroy the wagon.
– Never load more than 5 kg into the rear bag.
– Store the folded wagon only in a well-ventilated place to prevent mould growth.
– The textile parts may lose colour if exposed to heavy use over an extended period (e.g.
intensive sunlight); however, this does not constitute a reason for complaint.
– Do not use the wagon if parts are bent, worn or broken.
– Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL
900.
Step 2
:
Loosen all velcro fasteners and press
buttons at the front and back of the
wagon.
Step 3
:
Open all velcro fasteners on the
underside of the wagon. Afterwards,
you can remove the loose fabric
cover from the frame.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
15
4. Care instructions
The textiles of the wagon can be cleaned with a sponge and warm soapy water. Do not use any harsh
or abrasive cleaning agents (chlorine, etc.) to clean the textile cover, but only a light soap solution or
a special textile cleaning agent.
The plastic parts, as well as the chassis, should also be cleaned with a soap solution; after using the
wagon in rain or wet, always clean and dry the frame. If the fabric upholstery is soaked, allow the
wagon to dry in the upright or stretched state.
You should remove the wheels regularly and treat the axles and all articulated joints and
suspension with a silicone-based spray (no grease or oil). In this way, you can ensure that
your wagon runs smoothly and quietly and limit premature wear and tear. By taking care of
your wagon, make sure that no rust film is formed, as this is not a reason for complaint.
5. Warranty
This product is manufactured to the highest quality standards. When purchasing a new product, the
manufacturer grants the legal warranty of 24 months, beginning with the date of sale. The warranty
only covers defects which are due to material or manufacturing faults and the non-fulfilment of
guaranteed characteristics. When asserting the warranty, the original sales receipt with the date of
sale must be enclosed. Warranty repairs are carried out exclusively by FUXTEC GmbH. A warranty
claim exists only if the product is used as intended.
Excluded from the statutory warranty are all damages caused by the following events:
- Abuse, overloading or neglect.
- Commercial use (industry, trade, rental).
- Repairs by non-authorised services.
- Damage caused by external influences, foreign bodies, substances or accidents.
Wear parts are excluded from the warranty.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
16
6. Warnings and safety instructions
IMPORTANT!
Please keep this manual in a safe place for future reference. Failure to follow these instructions may
compromise your child's safety. It is essential that all persons using the wagon and its accessories
know how to handle it, even if the person concerned only uses the wagon for a short time. Please
note that this manual cannot exclude all possible risks that a child may be exposed to as a result of
using this product. The user is responsible for the safety of the child. If you have any further
questions, the FUXTEC customer service will be happy to help you.
IMPORTANT!
Please read the instructions carefully and familiarise yourself with the wagon before using it with
your child.
If your wagon is used by other people who are not familiar with it (e.g. grandparents), always explain
how to use it in advance.
The safety of your child may be compromised if you do not follow these instructions.
Keep the instructions carefully for future reference.
Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL-900.
Only original spare parts made or recommended by FUXTEC GmbH should be used with the CTL-900.
If you have any questions regarding the use of the CTL-900 or its accessories, please contact the
customer service of FUXTEC GmbH.
IMPORTANT! The maximum load capacity of the wagon is 75kg (plus another 5kg on the attachable
rear bag).
WARNING! This seating unit is not suitable for children under six months.
WARNING! This product is not suitable for jogging or skating.
WARNING! Before use, make sure that all locks are closed.
WARNING! Never lean on the push handle at the rear of the wagon or do not practice excessive
pressure on the push handle. This handle is comfortable and is not compare the handling of a pram.
WARNING! When carrying the wagon, make sure that the safety locks are not accidentally opened.
WARNING! When folding up the stand, make sure that you and others do not get trapped.
WARNING! Do not fold the wagon when there are one or more children in it.
WARNING! Do not let your child play with the wagon.
WARNING! Make sure that your child is out of reach when folding and unfolding the wagon to avoid
injury.
WARNING! Use a safety belt as soon as your child can sit independently.
WARNING! Never leave your child unattended.

Original User Manual FUXTEC CTL-900 – rev1
_________________________________________________________________________________
17
WARNING! When parking the wagon, always apply the brake before inserting or removing the child.
WARNING! Loads attached to the push handle impair the stability of the wagon.
WARNING: Protect children from intense sunlight. The soft top does not provide complete protection
against dangerous UV radiation.
WARNING! Always use the crotch strap in combination with the lap belt.
WARNING! Always adjust the belt to the correct position when you change the sitting position of
your child.
WARNING! Use this wagon only for the intended number of children (2).
WARNING! Loads attached to the handle or the backrest or the sides of the wagon impair the
stability of the wagon.
IMPORTANT! Park the wagon only with the brakes applied.
IMPORTANT! always check that the brake is correctly applied.