8
Downloads
You can view the downloaded items from the internet, such as APK,
pictures, videos and so on
Wi-Fi
Wi-fi signal availability and coverage will be subject to quantity,
infrastructure, and other signals penetrate the object
Open wi-fi and connect to the wireless network
1) Press home > menu, then touch Settings > wireless and network.
2) Select the wi-fi check box to open wi-fi. Cell phone will automatically
scan the available wireless networks.
3) Touch wi-fi Settings. Then the wi-fi network list will display wi-fi
networks to find the network name and security Settings (open network or
WEP, WPA/WPA2 encryption). If you enable notification wi-fi Settings of
the network, mobile phone will be available to find the open wireless
network in the status bar shows the icon.
4) Touch one of the wi-fi networks, in order to connect. When you select
the open web, mobile phones will automatically connect to the network.
If the selection is WEP, WPA/WPA2 encryption, network, you must first
enter the corresponding password, and then touch the connection.
Note:
1) After the phone is connected to the wireless network, the status bar
will display the wi-fi icon, and displays the signal strength is roughly
(number of strip lights up).
2) Unless you choose not to save the web, the next cell phone to connect
to has previously had connected the encryption of the wireless network,
there is no need to input password again. Wi-fi network search for
themselves, that is, cell phone does not need to perform additional steps
can be connected to a wi-fi network.
3) In addition, the mobile phone can also surf the Internet by GPRS. We
currently the default boot after the GPRS as the SIM card, user can choose
manual, the specific position in "Settings > > SIM card management" data
connection, touch "data connection", close the current SIM card data
connection.
Bluetooth
Open the bluetooth or set the phone to can be detected
1) Press home > menu, then touch Settings.
2) Touch and wireless networks, bluetooth check box, and then select
to open the bluetooth function. Bluetooth is turned on, the status bar
will appear here. Touch scan for devices will start scanning within the
scope of the bluetooth device.