Gamester Bandit RC71105 User manual

digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio
TV technician for help.
INSTRUCTION MANUAL
MODEL RC71105
For 1 player / Ages 8 and up
P/N 82364800 Rev.A
E
RADICA:®
GAMESTER™
BANDIT AND "THE UNFAIR ADVANTAGE" ARE
TRADEMARKS OF RADICA CHINA LTD.
© 2001 RADICA CHINA LTD.
PRODUCT SHAPE™
ALL RIGHTS RESERVED
GAMECUBE IS A TRADEMARK OF NINTENDO CO., LTD.
STAR WARS IS A REGISTEREDTRADEMARK OF LUCAS
LICENSING LTD.
THIS PRODUCT IS NOT DESIGNED, MANUFACTURED,
SPONSORED OR ENDORSED BY NINTENDO CO., LTD. OR
LUCAS LICENSING LTD.
ALL OTHER PRODUCT AND COMPANY NAMES MENTIONED
ARE THE TRADEMARKS OF THEIR RESPECTIVE OWNERS.
™

Introduction
Congratulations on choosing the Gamester
Bandit, the ultimate gamepad for the Nintendo
GameCube video game system.
Contents
1 x Gamepad
1 x Instruction Manual
IMPORTANT !
Before using this product, read the
GameCube Instruction Manual for safety,
health and other information.
Product Features
1. Five action buttons (A, B, X,Y and Z).
2.Two triggers (L and R) offering eight-bit
analog control.
3. One vibration feedback motor.
4. Left analog thumbstick.
5. Right analog C (camera) stick.
6. One eight-way digital directional pad.
7. One digital menu navigation
button(Start/Pause).
8. Rubber coated handle grips.
TROUBLE SHOOTING
The gamepad is not working properly.
• Make sure the gamepad connector
plug is firmly connected to the
GameCube controller port.
• Reset your GameCube game console.
Note: Do not use the Analog stick, Camera
stick, Left trigger and Right trigger while
turning on GameCube or it will not be
calibrated properly.
MAINTENANCE
• Handle this product carefully.
• Store this product away from dusty
or dirty areas.
• Keep this product away from
moisture or extreme temperature.
• Do not disassemble this product. If
a problem occurs, consult your
warranty card for replacement instructions.
Please retain this for future reference.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
TOP VIEW
FRONT VIEW