Gamester RC71093 Pro Racer User manual

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Warning: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio TV
technician for help.
INSTRUCTION MANUAL
MODEL RC71093
For 1 player / Ages 8 and up
P/N 82360100 Rev.B
E
RADICA:®
GAMESTER™
PRO RACER,VIBRA FORCE, DUOPULSEVIBRATION AND
“THE UNFAIR ADVANTAGE” ARETRADEMARKS OF
RADICA CHINA LTD.
© 2000 RADICA CHINA LTD.
PRODUCT SHAPE™
ALL RIGHTS RESERVED
PLAYSTATION AND DUAL SHOCK ARE REGISTERED
TRADEMARKS AND/ORTRADEMARKS OF SONY
COMPUTER ENTERTAINMENT INC.
TM

CONGRATULATIONS!
On choosing Pro Racer, the ultimate
PlayStation 2 driving peripheral.
Pro Racer can be used with all kinds of
PlayStation games, but is primarily designed
for use with driving games.
How to setup your Pro Racer
• Turn off your PlayStation 2.
• Insert the Pro Racer’s plug into one of the
standard controller ports on your
PlayStation 2.
• Turn on your PlayStation 2.
Using your Pro Racer (see fig.1)
The Pro Racer has all of the Buttons that you
would expect from a PlayStation controller. All
are clearly marked and used in exactly the
same way as normal. In addition, the Pro
Racer will function in three major modes:
• Negcon
• Vibra Force 2 Digital
• Vibra Force 2 Analog
Negcon mode
This is a mode specifically designed for
steering wheels and may be required by some
driving games.
In this mode, the steering wheel handle,
buttons are all analog.
The rumble feature will not be active in this
mode.
To switch the Pro Racer to Negcon mode follow
these steps.
• Press and hold the MODE button down for
2 seconds and release.The LED will flash to
let you know that you're in Negcon
mode.
Vibra Force 2 digital
This is the best option for non-driving games,
but you may find that you prefer it for some
driving games too.
In this mode the steering wheel handle,
buttons are all digital.
The rumble feature should be active in this
mode.
This is the default mode for the controller and
the LED is off .
Vibra Force 2 analog
This is the best option for driving games.
In this mode, the steering wheel handle and
buttons are all analog.
The rumble feature should be active in this
mode.
To switch the Pro Racer to analog mode follow
these steps.
• Press the MODE button once.The LED will
turn on to let you know that you're in analog
mode.
TROUBLESHOOTING
The Pro Racer is not working at all.
• Make sure that the Pro Racer plug is firmly
connected to the PlayStation 2 controller
port.
• Try to change modes.
The rumble feature is not working.
• Make sure that the vibration feature is
activated in the game itself.
• Make sure that the game your playing is
compatible with the official Sony dual shock
controller.
MAINTENANCE
• Handle this product carefully.
• Store this product away from dusty or dirty
areas.
• Keep this product away from moisture or
temperature extremes.
• Do not disassemble this product. If a
problem occurs, consult your warranty card
for replacement instructions.
Please retain this for future reference.
fig.1
+
+