Ganz ZN-DT350VP(N)E User manual







INFORMATIONTOUSER

CAUTION
RISKOFELECTRICSHOCK,
DONOTOPEN
!
CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,
DONOTREMOVECOVER(ORBACK).
NOUSERSERVICEABLEPARTSINSIDE.
REFERSERVICINGTOQUALIFIEDSEERIVCEPERSONEL.



Thissymbolisintendedtoalerttheusertothepresenceofun‐insulated
“dangerousvoltage”withintheproduct’senclosurethatmaybeofsufficient
magnitudetoconstituteariskofelectricshocktopersons.
!
Thissymbolisintendedtoalerttheusertothepresenceofimportant
operatingandmaintenance(servicing)instructionsintheliterature
accompanyingtheappliance.

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  3
TableofContents
1.FEATURES ...............................................................................................................4
2.PACKAGECONTENTS .............................................................................................. 5
3.PARTNAMES ..........................................................................................................6
3.1.InternalView ....................................................................................................................... 6
4.INSTALLATION ........................................................................................................7
4.1.InstallationTemplate ......................................................................................................... 8
4.2.Manualadjustmentfor3‐axismovements ........................................................................ 9
4.3.SettingtheImageAttribute................................................................................................ 9
4.4.OperatingtheOSDMenu................................................................................................... 9
5.CONNECTIONS ...................................................................................................... 10
5.1.Connectors ........................................................................................................................ 10
6.CONFIGURATION .................................................................................................. 13
6.1.Setupnetworkenvironment ............................................................................................ 13
6.2.Viewvideoonwebpage .................................................................................................. 13
6.2.1.ViewvideousingZNS‐GITIPAdminTool ................................................................... 13
6.2.2.ViewvideousingIPaddress....................................................................................... 16
6.3.Reset................................................................................................................................. 16
6.4.FactoryDefault................................................................................................................. 16
APPENDIX(A):SPECIFICATIONS ................................................................................ 17
Summary ................................................................................................................................. 17
ElectricalCharacteristics ......................................................................................................... 18
EnvironmentCondition ........................................................................................................... 18
VCA(VideoContentAnalysis) ................................................................................................. 19
APPENDIX(B):POWEROVERETHERNET................................................................... 20
PoEcompatibility .................................................................................................................... 20
Powerclassification................................................................................................................. 20
APPENDIX(C):DIMENSIONS ..................................................................................... 21
APPENDIX(D):ACCESSORIES .................................................................................... 21
APPENDIX(E):TROUBLESHOOTING ......................................................................... 22
CheckingyourFirmware ......................................................................................................... 22
Support.................................................................................................................................... 22

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  4
1.FEATURES
Camera
•Indoor/OutdoorFixedDomeIPCamera(VandalProof)
•HighQualityCompressioninrealtimestreaming
•Sony1/3”SuperHADCCD&HighQualitySS‐HQ1FullKitChipSet
Sony1/3"VerticalDoubleDensityColorCCD(Optional)
•TrueDay/Night(ICR)andWDR(Optional)
•Improvementofcolorrollingsuppression
Streaming
•Dualstreamingmode(suchasdifferentcodec/resolution/bitrateandsoon.)
•De‐interlacingonDSP
•Burnt‐intextsupported
•Unicast/Multicastsupported
Video/Audio
•Videocompression:H.264/MPEG/MJPEG,25/30FPS@D1(PAL/NTSC)
•Audiocompression:G.711(µLaw,aLaw)/PCM
•Analogvideooutforexternalmonitors
•VideoMotionDetectionsupported
•2‐waymonoaudiosupported
Network
•RTSP/HTTPprotocolsupported
•10/100Base‐TEthernet
AdditionalFeatures
•RS‐485supported
•MicroSDcardsupported
•PoEsupported
•Built‐inVideoContentAnalysis
•OSDsupported
•SDK(SoftwareDevelopmentKit)provided
VCA(VideoContentAnalysis)
•VCAPresence(Includedasbasic)
•VCASurveillance(Optional)

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  5
2.PACKAGECONTENTS
Unpackcarefullyandhandletheequipmentwithcare.Thepackagingcontains:

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEDCpoweradaptor

Extensioncable
(forLANandpowerconnector)

11Pinterminalblock


HexwrenchdriverScrewsandAnchorblocks


InstallationTemplateVideoBNCCable


QuickInstallationGuideSurfaceCushion
(forprotectionagainstdust)


Note
i

Theabovecontentsaresubjecttochangewithoutpriornotice.


ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  6
3.PARTNAMES
3.1.InternalView

①11pinterminalblockforD/I,D/O,audio,andserialcommunication
11pinterminalblockforD/I,D/O,Audioin/Outandserialcommunication.Refertothe
section“5.1.Connectors”formorespecificinformation.

②Reset
ResetswitchisusedforrestartingZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEorresetting
ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEtoFactoryDefault(FD).Refertothesection“6.3.
Reset”formorespecificinformation.

③MicroSDCardSocket
Itisamemorycardslotforexternalstorage.

④ExtensioncableSocket
ItisasocketforLANandpowerconnector.

⑤LANConnector(Ethernet)
ThisisaRJ45LANconnectorfor10/100Base‐TEthernet.Thissocketcanalsobeusedtopower
theZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEviaPoE(Optional).

⑥PowerAdaptorConnector(DC12V)
ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEneedsaDC12V1Aadapterforpowersupply.
①
②
③
④
*Modelshereinandtheirappearance
aresubjecttochangewithoutanyprior
notice.
⑥⑤

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  7
4.INSTALLATION


Note
i

WhenassemblingthemainbodyoftheZN‐DT350VE/ZN‐DNT350VE/ZN‐
DWNT350VEanditsdomecover,makesuretheyfiteachotherintoplace.
 
1)ConnecttheLANcable,powersupply
cable,andthevideoloopoutcable
withtheZN‐DT350VE/ZN‐
DNT350VE/ZN‐DWNT350VE.

2)Placetheinstallationtemplateonthe
ceiling.


3)Drillthreeholesonthetemplateand
insertanchorblocksintotheholes.
FastentheZN‐DT350VE/ZN‐
DNT350VE/ZN‐DWNT350VEwith
screws.

4)Putthedomecoveronthemain
bodyoftheZN‐DT350VE/ZN‐
DNT350VE/ZN‐DWNT350VE.Makesure
themainbodyandthecoverfiteach
otherintoplace.

5)Fastenthecoverwithscrews.

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  8
Caution
!

TheZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEmayfallofftheceilingeven
aftertheproperinstallationandmounting.Topreventanyaccident,makesure
theceilingisfirmandstableenoughtosupporttheZN‐DT350VE/ZN‐
DNT350VE/ZN‐DWNT350VE.Ifanyreinforcementisneeded,consultwithyour
safetypersonnelandproceedwiththeinstallation.
4.1.InstallationTemplate

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  9
4.2.Manualadjustmentfor3-axismovements

Afterinstallation,makeamanualadjustmentontheinnerliner.Perform3‐axismovements
manuallybyturningtheinnerlinertodifferentdirectionsasabove,andcheckifitmoves
properly.

4.3.SettingtheImageAttribute
Youcansettheimageattributeofcamerathroughthewebpage.
ThemenuofimageattributecanbeseenunderSetup>Video&Audio>Video‐in>Attribute
Setting.Brightness,contrast,hue,saturationandsharpnesscanbeadjusted.

4.4.OperatingtheOSDMenu
TooperatetheOSDofcamera,refertothe”OSDMenuControlManual”intheSDK.


ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  10
5.CONNECTIONS
5.1.Connectors


①AudioIn/Out
ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEhasamonoaudioinputandamonoaudiooutput.
Astheoutputpowerfortheaudioislow,amplifierspeakerisneeded(Donotuseaheadphone
orearphonedirectlytothecamera).


②Sensor(DI)connection
ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEprovides1channelD/I.Itcanbeconnectedto
eitheravoltagetypesensororarelaytypesensorasthefollowingfigures.Itcanbeselected
bysoftware.

Inputvoltagerange:0VDCminimumto24VDCmaximum
Inputvoltagethreshold:1V


Caution
!

Donotexceedthemaximuminputvoltageorrelayrate.
AoutAin
Mic
AmpSpeaker

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  11


③Alarm(DO)connection
Onlytherelaytypeissupported.
RelayRating:Max24VAC500mAor12VDC1A

Caution
!

Donotexceedthemaximumrelayrating.



④VideoOut
ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEprovides1videoloopout.

DO
COM
RelayType
Device
Internal
+5V
DI
COM
DI
COM+
‐
RelayTypeVoltageType
+‐
Outputof
Sensor
Outputof
Sensor
InternalInternal
+‐
Video
GND
White
Black

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  12
⑤RS‐485
TheRS‐485serialportconsistsofTRX+(RX+)andTRX‐(RX‐)asfollowingthefollowingimage.

RS‐485Connection

485Device

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  13
6.CONFIGURATION
6.1.Setupnetworkenvironment
ThedefaultIPaddressofyourIPdeviceis192.168.XXX.XXX.YoucanfindtheavailableIPaddress
fromtheMACaddressofyourdevice.PleasemakesurethedeviceandyourPCareonthesame
networksegmentbeforerunningtheinstallation.IfthenetworksegmentbetweenyourPCand
thedeviceisdifferent,changeyourPC’ssettingsasbelow.

IPaddress:192.168.xxx.xxx
Subnetmask:255.255.0.0


6.2.Viewvideoonwebpage
ViewthelivevideoonawebpageusingyourIPdeviceanditsIPaddress.YoucanusetheZNS‐
GITIPAdminToolorentertheIPaddressonthewebpage.
6.2.1.ViewvideousingZNS-GITIPAdminTool
ZNS‐GITIPAdminToolautomaticallysearchesallactivatedGANZnetworkcameraandencoder
seriesandshowstheproductname,IPaddress,MACaddressandetc.ZNS‐GITIPAdminToolis
providedwithSDKatthefollowingSDKpath.

{SDKroot}\BIN\TOOLS\AdminTool\

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  14
TousetheZNS‐GITIPAdminToolandviewthelivevideoonawebpage:

1. StartZNS‐GITIPAdminTool.Namesandinfoofcurrentlyactivateddevicesappearasa
list.
2. Right‐clickonthedesireddeviceandselectWebview.
3. SelectContinuetothiswebsiteontheSecurityCertificateAlertpage.
(TheexplanationandcapturedimagesatthismanualaremainlyonthebasisofInternet
Explorer7.0)


4. Clickpop‐upblockedandinstalltheActiveXcontrolasbelow.Youneedtoinstallthe
ActiveXfordisplayingtheimages.




ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  15
5. Waitforafewsecondswhilethewebpageloads.Thelivevideoisdisplayedasbelow.

6. Ifthelivevideoisnotdisplayedand“CannotCreateXMLDOMDocumentInstall
MSXML4.0”messageisshownasbelow,pleasedownloadandInstallfromthelink
below.
http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B‐B4F2‐46DA‐
B4B6‐C5D7485F2B42&displaylang=en
(VCALibraryrequiresMSXML4.0librarywhichisanxmlparsermadebyMicrosoft.)


ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  16
6.2.2.ViewvideousingIPaddress
ViewthelivevideoonawebpageusingyourIPdeviceanditsIPaddress.Tohavethecorrect
IPaddressreadyanduseitonawebpage:
1. ConvertaMACaddresstoanIPaddressorchecktheIPaddressontheZNS‐GITIPAdminTool.
(TheMACaddressisattachedonthesideorbottomofthedevice.)



2. OpenawebbrowserandentertheIPaddressofthedevice.
3. ClickContinuetothiswebsiteontheSecurityCertificateAlertpage.
4. Clickpop‐upblockedandinstalltheActiveXcontrolasbelow.YouneedtoinstalltheActiveX
fordisplayingtheimages.
5. Waitforafewsecondswhilethewebpageloads.Thelivevideoisdisplayed.
6.3.Reset
1. Whilethedeviceisinuse,pressandholdtheResetbutton.
2. ReleasetheResetbuttonafter3seconds.
3. Waitforthesystemtoreboot.
6.4.FactoryDefault
1. Disconnectthepowersupplyfromthedevice.
2. ConnectthepowertothedevicewiththeResetbuttonpressedandheld.
3. ReleasetheResetbuttonafter5seconds.
4. Waitforthesystemtoreboot.

Thefactorydefaultsettingscanbeinferredasfollows:


IPaddress: 192.168.xx.yy
Networkmask: 255.255.0.0
Gateway: 192.168.0.1
UserID:  root
Password: pass
MACaddress=00‐1C‐B8‐C0‐14‐B1 →IPaddress=192.168.20.177
theHexadecimalnumbertoDecimalnumber.

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  17
APPENDIX(A):SPECIFICATIONS
Summary
CameraModule
ModelZN‐DT/DNT350VE ZN‐DWNT350VE
ImageSensorSony1/3”SuperHAD
CCD,410KPixel
SONY1/3"VerticalDouble
DensityColorCCD
EffectivePixelsNTSC:768(H)x494(V)
PAL:752(H)x582(V)
Size1/3inchinterlinetransferCCD
CCD
Scanningsystem2:1Interlace
SyncFrequencyNTSC:15.734KHz(H)59.94Hz(V)
PAL:15.625KHz(H)50.00Hz(V)
Resolution540TVLines560TVlines(Color),
600TVlines(B/W)
S/N(Ysignal)50dB(AGCOff)52dB(AGCOff)
Min.
Illumination
0.3Lux/F1.2(Color),
01.Lux/F1.2(B/W),
0.002Lux(Sens‐up)
0.3Lux/F1.2(Color),
0.03Lux/F1.2(B/W)
WideDynamic
RangeNotsupported52dB(x128)
ColorON/AUTO
AGCControlOFF/LOW/MIDDLE/HIGHSelectable
WhiteBalanceATW/AWC/MANUAL(1,800°K~10,500°K)
Electronic
ShutterSpeed
AUTO/
MANUAL
(NTSC:1/60~1/120,000,
PAL:1/50~1/120,000)
AUTO/
MANUAL
(NTSC:X256~1/60sec~
1/120,000sec,
PAL:X256~1/50sec~
1/120,000sec)
Sens‐upandSens‐upLimitis
selectable/Flickerless
Sens‐UpOFF/AUTO
ELECTRICAL
DNROFF/LOW/MIDDLE/HIGH
(NoiseReduction)
ON(Level0~32)/
OFFSelectable
Lens2.8~10.5mmF1.2DCAutoIrisBoardVari‐Focal
Day&Night
SW(ZN‐DT350VE)
IRCutFilterRemove
(ZN‐DNT350VE)
IRCutFilterRemove
Video
CompressionFormatH.264,MPEG‐4,MJPEGSelectableperStream
NumberofStreamsDualStream,Configurable

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  18
ResolutionD1,4CIF,VGA,CIF,QCIF
CompressionFPS25/30fps@D1(PAL/NTSC)
DeinterlacingSupported(DSP)
MotionDetectionSupported
OSDSupported(DSP)
Burnt‐inText(Digital)Supported(DSP)
Output1LoopOut(BNCconnector)
Audio
Input/output1/1 channel
CompressionFormatG.711
Function
DigitalInput/output1/1channel
RS‐485Supported
Network10/100Base‐T
PoweroverEthernetSupported
Protocol
TCP/IP,UDP/IP,HTTP,RTSP,RTCP,RTP/UDP,RTP/TCP,
SNTP,mDNS,UPnP,SMTP,SOCK,IGMP,DHCP,
FTP,DDNS,SSLv2/v3,IEEE802.1X,SSH
SDSlotSupported(MicroSD)
※MicroSDCardisnotincluded
MaterialAluminumDieCasting‐2
DimensionsHousing:150.8(Ø)113(H)mm
Dome:100(Ø)mm
ColorWhitePearl

ElectricalCharacteristics
VideoOutput1Vp‐p,75Ω
AudioInputLinein,1.43Vp‐p(Min1.35Vp‐p,max1.49Vp‐p),39KΩ
AudioOutputLineout,46mWPower,16Ω
Sensor(D/I)TTLlevel4.5Vthreshold,Max50mA
Alarm(D/O)Max500mA@24VACor1A@12VDC
PowerSource(Approx)12VDC300mAorPoEIEEE802.3af(Class0)
EnvironmentCondition
OperatingTemperature0˚C~50˚C(32˚F~122˚F)
OperatingHumidityUpto85%RH


ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  19
VCA(VideoContentAnalysis)
VCAPresence(IncludedasStandard)
HighPerformanceAdvancedTrackingAlgorithm,LowFalseAlarmRate
EasytoUseIntuitiveWebBrowserInterface
DetectionZonesMulti‐segmentPolygonsandLines
On‐screenDisplayReal‐timeDisplayofTrackingDataandEvents
Burnt‐inAnnotation
StreamorAnalogvideoout
(※Analogvideooutsupportcanvarydependingonthedevice
modelandhardwareversionandthefirmwareversion)
VCASurveillance(Optional)
DetectionBehaviorCameraTampering,Direction,Stopping,Loitering,Entering,
Exiting,Appear,andDisappearFilters
3DBehaviorPerspectiveCorrectedSizeandSpeedFilters
StatisticsCountingFunctionsandOtherStatistics
MetaDataBinaryXMLFormat
ImageStabilization(Optional)
ElectronicStabilizationRemovesCameraSway

ZN‐DT350VE/ZN‐DNT350VE/ZN‐DWNT350VEInstallationGuide
2010/2‐103A.02  20
APPENDIX(B):POWEROVERETHERNET
ThePoweroverEthernet(PoE)isdesignedtoextractpowerfromaconventionaltwistedpair
Category5Ethernetcable,conformingtotheIEEE802.3afPower‐over‐Ethernet(PoE)standard.
IEEE802.3afallowsfortwopoweroptionsforCategory5cables.
ThePoEmodulesignatureandcontrolcircuitprovidesthePoEcompatibilitysignatureand
powerclassificationrequiredbythePowerSourcingEquipment(PSE)beforeapplyingupto
15Wpowertotheport.
ThehighefficiencyDC/DCconverteroperatesoverawideinputvoltagerangeandprovidesa
regulatedlowrippleandlownoiseoutput.TheDC/DCconverteralsohasbuilt‐inoverloadand
short‐circuitoutputprotection.
PoEcompatibility

WithnonPowerSourcingEquipment(PSE)
WhenitisconnectedwithnonPSE,thepoweradaptorshouldbeconnected.

Withpoweradaptor
ConnectingbothPSEandpoweradaptordoesnotdoanyharmtotheproducts.Disconnecting
poweradaptorwhileitisoperatingdoesnotstopoperation.Theproductcontinuestowork
withoutrebooting.

Powerclassification
ThePoEPowerClasssupportedbytheIPdeviceisClass0.

ClassUsageMinimumPowerLevels
OutputatthePSE
MaximumPowerLevelsatthe
PoweredDevice
0Default15.4W0.44to12.95W
