GARAGEFLEX FX2010E User manual

Garageflex Assembly Instructions
Product: Hobby / Sports Centre FX2010E
Package Contents:
•7 x Round Tubes
•1 x Hanging Bracket
•2 x Side Panels
•2 x Square Tubing
•1 x Canvas Bag
•1 x Shelf
•8 x Hanger Hooks
•1 x Holder Base
•1 x Stick Holder
•18 x Screws

Tools Required:
•Drill
•Phillips Bit
Step 1: Check all parts have been received
Step 2: Using the supplied screws, assemble the 7 round tubes and the 2 square tubes as shown
below.

Step 3: Fasten the bottom tray on the lower right hand side
Step 4: Position the middle wire shelf with the “S” hooks and the stick guide on the rack
Step 5: Put the mounting bracket onto the FlexiPanel
Step 6: Position and snap the yellow canvas bag over the middle round tubes
Step 7: Lift the rack and place the top square tube in the wall mounted bracket.
If you have any questions or need some advice regarding your installation, please do get in touch
and we will do our best to help.

You can contact us on:
01491 579975 | [e-mail]
www.garageflex.co.uk