GARAGEFLEX FX2011E User manual

Garageflex Assembly Instructions
Product: Golf Activity Centre FX2011E
Package Contents:
•7 x Round Tubes
•1 x Hanging Bracket
•2 x Side Panels
•2 x Square Tubing
•1 x Canvas Bag
•1 x Shelf
•8 x Hanger Hooks
•1 x Holder Base
•1 x Stick Holder
•18 x Screws
Tools Required:
•Electric screwdriver or drill with Phillips driver bit

Step 1: Check that you have everything you need ready
Step 2: Position the parts as shown below using the screws to fasten together in six places on
each side. Please note, the open mesh on the side frames face outwards
Step 3: Connect the corner braces as shown above
Step 4: Place the four hanger hooks in to the holes provided
Step 5: Mount on FlexiPanel or FlexiTrack on your garage wall
Step 4: Position the middle wire shelf with the “S” hooks and the stick guide on the rack

If you have any questions or need some advice regarding your installation, please do get in touch
and we will do our best to help.
You can contact us on:
01491 579975 | [email protected]
www.garageflex.co.uk