Gardenline GLPC 41 Configuration guide

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
5
41cc Petrol Chainsaw – GLPC 41General information
Congratulations!
You have made an excellent choice with the purchase of this quality
Gardenline® product.
By doing so you now have the assurance and peace of mind which
comes from purchasing a product that has been manufactured to
the highest standards of performance and safety, supported by the
high quality standards of ALDI.
We want you to be completely satisfied with your purchase so this
Gardenline® product is backed by a comprehensive manufacturer’s
3 year warranty and an outstanding after sales service through our
dedicated Helpline.
We hope you will enjoy using your purchase for many years to come.
If you require technical support or in the unlikely event that your
purchase is faulty please telephone our Helpline for immediate
assistance. Faulty product claims made within the 3 year warranty
period will be repaired or replaced free of charge provided that you
have satisfactory proof of purchase (keep your till receipt safe!).
This does not affect your statutory rights. However, be aware that
the warranty will become null and void if the product is found to
have been deliberately damaged, misused or disassembled.
The Declaration of Conformity for the Gardenline GLPC 41 Petrol Chainsaw is printed
on page 71 of this User Manual.
Declaration of conformity (see chapter 'Declaration of conformity').
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
6
41cc Petrol Chainsaw – GLPC 41General information
General information
Reading and storing the original instruction manual
This instruction manual accompanies this petrol chainsaw. It contains
important information on start-up and handling.
For improved readability, the 'Original instruction manual' will be referred
to only as the 'Instruction manual'.
Before using the petrol chainsaw, read the instruction manual carefully. This particularly
applies for the safety notes. Failure to heed this instruction manual may result in severe
injury or damage to the petrol chainsaw.
The instruction manual is based on the standards and rules in force in the European
Union. When abroad, you must also observe country-specific guidelines and laws.
Store the instruction manual for future use. If you pass the chainsaw on to third parties,
please be absolutely sure to include this instruction manual.
Explanation of symbols
The following symbols and signal words are used in this instruction manual, on the
41cc Petrol Chainsaw or on the packaging.
DANGER! This signal symbol/word indicates a hazard with
high risk that, if not avoided, results in death or
a severe injury.
WARNING! This signal symbol/word designates a hazard with
moderate degree of risk which may lead to death
or severe injury if not avoided.
CAUTION! This signal symbol/word designates a hazard with
low risk that, if not avoided, may result in minor
or moderate injury.
NOTICE! This signal symbol/word warns against potential
damages to property.
This symbol provides you with useful supplementary
information on assembly or operation.

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
7
41cc Petrol Chainsaw – GLPC 41 General information
Use and storage of the user guide
In terms of the 41cc Petrol Chainsaw, this instruction manual provides the information
necessary to understand how to safely:
– Assemble/the chain and chain bar on the engine.
– Mixing the Petrol/Oil fuel & adding it to the fuel tank.
– Adding the chain oil.
– Engine Start and Stop procedures.
– The intended use, and how to use it to cut with.
– How to store it.
– Simple maintenance and fault finding.
– If necessary, contacting about repairs, spare parts and warranty claims.
WARNING!
Read all safety regulations and instructions. Any errors made
in following the safety regulations and instructions may result
in fire and/or serious injury. Keep all safety regulations and
instructions in a safe place for future use.
Proper Use
The chain is designed exclusively for sawing wood. You may only fell trees if
you have received the appropriate training. The operating instructions as supplied
by the manufacturer must be obeyed to ensure that the equipment is used properly
& the manufacturer cannot be held liable for damage or injury caused by improper
or incorrect usage.
The equipment is to be used only for its prescribed purpose & any use which
is not expressly permitted in these instructions may result in damage to
the equipment and place the user in serious danger. Be sure to observe the
restrictions in the safety information.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the equipment is
used in commercial, trade or industrial businesses or for equivalent purposes.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
8
41cc Petrol Chainsaw – GLPC 41General information
DANGER!
Cut only wood with this chainsaw. Due to the high risk of
physical injury to the user, the equipment must not be used
for purposes which it was not intended. For example do not
use the chainsaw for cutting plastic, masonry, or non-wood
building materials. For safety reasons, the equipment is not
allowed to be used as a drive unit for other tools of any kind.
DO NOT operate a chainsaw whilst working in a tree.
The equipment is allowed to be used only for its intended
purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable
for any damage or injuries of any kind resulting from such
misuse.
Reasonably foreseeable misuse
– Not reading the Instructions and Safety advice in this User
Guide, before using the product.
– Damage/Injury caused by not switching the engine off.
– Not having the chain adjusted properly, leading to the chain
coming off and causing damage or injury.
– Damage/Injury caused by the chain hitting loose materials
or/foreign objects which are then catapulted away.
The reprinting or reproduction by any other means, in whole or
in part, of documentation and papers accompanying products
is permitted only with the express consent of Einhell UK Ltd.
Subject to technical changes.

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
9
41cc Petrol Chainsaw – GLPC 41 Safety
Safety
Explanation of the symbols and types of instructions used
1Read the user manual before using the machine.
2On all jobs performed with the saw you must always wear safety goggles to guard
your eyes from flying materials/objects and a sound-proof helmet, ear plugs or the
like to protect your hearing. Wear a safety helmet if there is a risk of objects falling
on you from above.
3Wear gloves to protect your hands.
4Wear safety shoes to protect your feet.
5Warning! Danger!
6Make sure that the chain brake is released. Pull back the handle/chain brake
before operating.
7Noise emission complies with Directive 2000/14/EC!
Fig. 2
1 2 3 4 5 6 7

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
10
41cc Petrol Chainsaw – GLPC 41Safety
Explanation of the pictograms for handling on the
machine (Fig. 3)
A safety sign is fitted to the chainsaw's fan filter cover. This label,
along with the safety instructions on these pages, should be
carefully read before attempting to operate this unit.
DANGER!
1. RED: Warns about a dangerous method of working that must
not be used.
2. GREEN: Recommended operation for safe sawing.
DANGER!
1
Beware of recoil.
2
Do not hold the saw in one hand.
3
Avoid contacting the workpiece with the tip of the rail
(chain return point). RECOMMENDED!
4
Hold the saw firmly with both hands. Place your right hand
on the rear handle and your left hand on the front handle.
Fig. 3
1 2 3 4

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
11
41cc Petrol Chainsaw – GLPC 41 Safety
Safety devices (Fig. 4)
2LOW KICKBACK SAW CHAIN helps significantly reduce kickback, or the intensity of
kickback, due to specially designed depth gauges and guard links.
5CHAIN BRAKE LEVER/HAND GUARD protects the operator’s left hand in the event it
slips off the front handle while saw is running.
5CHAIN BRAKE is a safety feature designed to reduce the possibility of injury due
to kickback by stopping a moving saw chain in milliseconds. It is activated by the
CHAIN BRAKE lever.
10 STOP SWITCH immediately stops the engine when tripped. Stop switch must be
pushed to ON position to start or restart the engine.
11 SAFETY LOCK prevents accidental acceleration of the engine. The THROTTLE LEVER
(Fig. 4/pos.19) cannot be squeezed unless the SAFETY LOCK is depressed.
20 CHAIN CATCHER reduces the danger of injury in the event saw chain breaks or
derails during operation. The chain catcher is designed to intercept a whipping
chain.
Fig. 4
2019
2
10 115

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
12
41cc Petrol Chainsaw – GLPC 41Safety
WARNING!
Before using
– Wearing personal protective gear such as, safety gloves,
non-slip safety shoes, long trousers, a protective
helmet, snug fitting clothing, eye protection and ear
protection reduces the risk of injury. If you have long hair,
wear a hair net. Never use a chainsaw whilst barefoot or in
sandals.
– Before you start the engine, make sure that the saw
chain is not contacting anything and remove all objects
that could be caught up and catapulted away. Failure to
do this may result in accident or injury if the moving chain
catches something or they are catapulted away.
CAUTION!
Petrol is highly flammable! There is a risk of fire if the fuel
is not handled and stored carefully! Therefore:
– Only store petrol in containers designed to hold petroleum-
based liquids.
– Only refuel out in the open and do not smoke during the
refuelling process.
– Always refuel before starting the engine. Do not open the
fuel tank cap and do not refuel while the engine is running
or when the equipment is hot.
– If petrol has overflowed, do not under any circumstances
attempt to start the engine. Instead, remove the equipment
from the affected area. Avoid starting the engine until the
petrol fumes have completely evaporated.

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
13
41cc Petrol Chainsaw – GLPC 41 Safety
– For safety reasons, the petrol tank and the tank cap must
be replaced if they are damaged.
– Replace defective silencers. Defective silencers can cause engine running
problems and hearing damage.
– Before using the petrol chainsaw, visually inspect it to ensure that the mounting
bolts and the entire cutting apparatus are in good working order (i.e. not worn
out or damaged). To prevent any imbalance, replace worn out or damaged
mounting bolts as a set only. An unbalanced machine can cause damage to the
machine or parts and cause additional vibrations possibly resulting in injury.
WARNING!
Read and follow the operating instructions and safety
information before using for the first time. Failure to follow
the safety notes and instructions may result in damage to the
machine, fire and/or personal injury.
When using equipment, a few safety precautions must be
observed to avoid injuries and damage. Please read the
complete operating manual with due care. Keep this manual
in a safe place, so that the information is available at all times.
If you give the equipment to any other person, give them
these operating instructions as well. We accept no liability for
damage or accidents which arise due to non-observance of
these instructions and the safety information.
– This equipment is not designed to be used by people (including children) with limited
physical, sensory or mental capacities or those with no experience and/or knowledge
unless they are supervised by a person who is responsible for their safety or they have
received instructions from such a person in how to use the equipment safely.
– Children must always be supervised in order to ensure that they do not play
with the equipment.
– Never allow other persons who are not familiar with the operating instructions to use
the equipment. Contact your local governmental agency for information regarding
minimum age requirements for the user.
– Never use a chainsaw in the direct vicinity of persons - especially children or animals.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
14
41cc Petrol Chainsaw – GLPC 41Safety
WARNING!
Maintain a safety distance of 15 m. If approached, switch off
the equipment immediately. Always keep in mind that the
user of the equipment is responsible for accidents involving
other persons or their property.
DANGER!
Danger of poisoning. Emissions, fuels and lubricants are toxic.
Do not inhale emissions.
Safety instructions
1. Operation, storage and monitoring
a) Wear close-fitting work clothing which is in good
condition and which offers protection, such as long
trousers, sturdy work shoes, hard-wearing gloves,
a helmet, a face mask or goggles to protect your eyes,
and good quality ear defenders to reduce the noise.
Wearing personal protective gear such as, safety gloves,
non-slip safety shoes, long trousers, a helmet, snug fitting
clothing, eye protection or ear protection reduces the risk
of injury. If you have long hair, wear a hair net.
b) Store the equipment in a safe place. Open the fuel
tank cap slowly to release any pressure that may
have formed in the fuel tank. To prevent the risk of fire,
move at least 3 metres from the refuelling area before you
start the equipment. There is a risk of fire if the fuel is not
handled and stored carefully.

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
15
41cc Petrol Chainsaw – GLPC 41 Safety
c) Switch off the equipment before you put it down.
If the machine has not stopped when placing it down
there is risk of rotating parts touching the ground and
quickly twisting the machine causing damage or
personal injury.
d) Always hold the equipment firmly in both hands. Your
fingers and thumbs should be wrapped around the
handles. Using the machine with only one hand, will
cause bad stability (overbalancing) and could result in
damage to the machine, or personal injury.
e) Ensure that all screws and connecting elements are
secure. Never use the equipment if it has not been
properly adjusted or has not been fully or safely
assembled. Loose parts and screws could cause damage
to the machine or personal injury if parts come loose or
fall off during use. There is also a greater risk of vibration
injury if screws are not tight.
f) Make sure that the handles are clean and dry and that
there is no petrol mixture on them. Moist or greasy
surfaces may cause slipping control elements and could
result you losing control of the machine.
g) DO NOT operate a chainsaw with one hand! Serious
injury to the operator, helpers, bystanders, or any
combination of these persons may result from one-
handed operation. A chainsaw is intended for two-handed
use.
h) Carry the chainsaw with the engine stopped, the chain
guard fitted, the guide bar and saw chain to the rear,
and the muffler away from your body. Serious injury to
the operator, helpers, bystanders, or any combination of
these persons may result from carrying the chainsaw, with
the engine running.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
16
41cc Petrol Chainsaw – GLPC 41Safety
i) Check your work area for debris that may be struck
or thrown during operation. Striking small objects such
as stones with the chain may result in accident or injury if
they are catapulted away.
j) Keep all parts of your body and items of clothing away
from the chain when you start the engine and when
the engine is running. Before you start the engine
ensure that the chain will not strike an obstacle.
Allowing the chain to be too close to your body or clothing
could result in damage to your clothing, or personal injury.
k) Always switch off the engine before working on the
cutting tool. If the engine is left running there is a risk of
damage or injury.
l) Store the equipment and accessories in a safe place
protected from naked flames and heat/ spark sources
such as gas heaters, tumble driers, oil stoves or
portable radiators, etc. There is a risk of fire if the petrol
fuel is not handled and stored carefully.
m) Do not start cutting until you have a clear work area,
secure footing and a planned retreat path from a
falling branch or falling tree. Serious injury to the
operator, helpers, bystanders, or any combination of these
persons may result from not keeping a clear working area,
not maintaining a secure footing or not having a planned
retreat path.
n) Only adequately trained people and adults may use,
adjust and maintain the equipment. This will ensure that
the safety of the machine is not compromised.
o) If you are not familiar with the equipment, practice
handling it with the engine off. An inexperienced
operator can cause damage or injury by using the machine
in the wrong way.

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
17
41cc Petrol Chainsaw – GLPC 41 Safety
p) Always check the site you want to cut before you
begin your work. Solid objects such as pieces of
metal, bottles, stones, etc. can be catapulted away
and cause serious injuries and permanent damage
to the equipment. If you touch a solid object with
the equipment by mistake, switch off the engine
immediately and check the equipment for signs of
damage. Never use the equipment if it is damaged or
defective. Using a damaged or defective machine can
result in accident or injury.
q) Ensure that the chain does not turn when the engine is
idling. If this happens, stop using the machine and have it
adjusted or repaired. Risk of accident or injury.
r) Always operate the equipment in its high speed range
for trimming and cutting. Do not let the engine run at
low speed at the start of cutting or during trimming
work. Cutting at too low a speed could cause chain
snagging or clutch wear/engine stalling resulting in
damage or injury.
s) NEVER use a chainsaw which is damaged, incorrectly
adjusted or incompletely and loosely assembled. Make
sure that the chainsaw stops when the chain brake is
applied. Failure to do this may result in accident or injury if
parts become loose, or detached, or the chain brake does
not operate.
t) When cutting a tree limb that is in tension, be alert
for springback so that you will not be struck when
the tension in the wood fibres is released. This may
cause reactions such as overbalancing which could result
in damage to the machine, or serious personal injury or
death.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
18
41cc Petrol Chainsaw – GLPC 41Safety
u) Do not use the equipment if other people or animals
are in the immediate vicinity. Keep a minimum distance
of 15 m between yourself and other people or animals
when cutting. Keep a distance of 30 m if you are
cutting down to the ground. This will help reduce or
eliminate an accident or injury if small objects such as
stones are caught by the chain and catapulted away.
2. Additional instructions
a) Do not use any fuel other than that recommended
in the operating instructions. Always follow the
instructions in the section 'Fuel and oil' on page 38.
Do not use petrol that has not been mixed correctly with
2-stroke oil. Otherwise there is a risk of causing permanent
damage to the engine and of voiding the manufacturer‘s
guarantee.
b) Do not smoke while refuelling or using the equipment.
There is a risk of the petrol fuel setting on fire from
someone smoking in the vicinity of the fuel/machine.
c) Never use the equipment without the exhaust pipe
and properly installed exhaust shield. Using the
equipment without the exhaust pipe and properly
installed exhaust shield can cause hearing damage.
d) Do not touch the exhaust pipe, spark plug or other
metallic parts with your hands or body while the
engine is running or shortly after it is switched off as
this can cause severe burns or electric shock. Hold the
equipment so that your fingers and thumbs are wrapped
around the handle.
e) Do not use the equipment in an uncomfortable
posture, off balance or with extended arms or with

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
19
41cc Petrol Chainsaw – GLPC 41 Safety
only one hand. Always use both hands on the equipment
and wrap your fingers and thumbs around the handles.
injury Hazard.
f) Always keep the chain on the ground whilst the
equipment is in operation.
g) Chainsaw servicing, other than the items listed in the
user manual safety and maintenance instructions,
should be performed only by competent chainsaw
service personnel. Risk of injury/death.
h) Do not use the equipment over an extended period
of time – take regular breaks. Tiredness whilst using
a machine could result in damage to the machine, or
personal injury.
i) Do not use the equipment when tired or under the
influence of alcohol or drugs. Being tired or under the
influence of drugs or alcohol whilst using a machine could
result in damage to the machine, or personal injury.
National regulations differ in some countries and may restrict the
use of the machine.
J) Any modifications to the product may place your
personal safety at risk and cause the manufacturer’s
warranty to be voided.
K) Never use the equipment near inflammable liquids or
gases, neither in enclosed rooms nor outdoors. This
may cause explosions and/or fire. Fire/explosion risk.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
20
41cc Petrol Chainsaw – GLPC 41Safety
L) Do not use any other cutting tools. For your own safety
you must use only the accessories and attachments
which are listed in the operating instructions or which
are recommended or specified by the manufacturer.
The use of cutting tools or accessories other than those
recommended in the operating instructions or catalogue
may place your personal safety at risk. Using non-
approved accessories with the machine can result in
accident or injury.
m) If any liquid is spilled while filling the oil tank or the
fuel tank, the equipment must be cleaned to remove
the spilled liquid. Fire/explosion risk.
n) When transporting your chainsaw, always fit the chain
guard over the bar and chain. Risk of cutting.
o) To detect significant damage or defects, the equipment
must be inspected each time before use and each time
after being dropped or suffering other shocks. Do not
use the chainsaw if any damage has occurred as a
result of dropping. Risk of injury/death.
3. Safety of persons
a) Be careful, pay attention to what you are doing and
approach work with a chainsaw in a reasonable
manner. Do not use a chainsaw if you are tired or under
the influence of drugs, alcohol or medication. A single
moment of inattentiveness when using the chainsaw can
result in serious injury.
b) Always wear personal protective gear and a breathing
mask in necessary. Depending on the type of chainsaw
and how it is used, wearing personal protective gear such

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
21
41cc Petrol Chainsaw – GLPC 41 Safety
as a dust mask, non-slip safety shoes, a protective helmet
plus eye and ear protection reduces the risk of injury. If you
have long hair, wear a hair net. Use a breathing mask if
performing dusty work.
c) Avoid accidents whilst carrying the device between
using. Make sure that the chainsaw is turned off before
you pick it up or carry it. If the engine is running and you
have your hand/fingers on the throttle lever and throttle
lock when carrying the chainsaw, this may cause an
accident.
d) Remove all adjusting tools or spanners before you
switch the chainsaw on. A tool or spanner in contact with
a rotating part of the device may result in injury.
e) Avoid an abnormal posture. Maintain a safe position and
keep your balance at all times. This will allow you to
have better control of the chainsaw in the event
of unexpected situations.
f) Wear suitable clothing. Do not wear any loose-fitting
clothing or jewellery. Keep your hair, clothing and
gloves away from the moving parts. Loose clothing,
jewellery or long hair may get caught in the moving parts.
It is recommended that you wear chainsaw specific safety
gloves, sturdy non-slip footwear ear defenders and
protective goggles.
4. Using and handling the chainsaw
a) Do not overload the device. Use the right chainsaw
for your intended work. The right chainsaw will ensure
that you work more effectively and safely within the
equipment's capabilities.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
22
41cc Petrol Chainsaw – GLPC 41Safety
b) Do not use the chainsaw if its switch is defective.
A chainsaw that can no longer be switched on or
off is dangerous and must be repaired.
c) Pull off the spark plug boot and remove the spark plug
before you make any adjustments to the device, or
make changes to the chain. This precaution will prevent
the chainsaw from accidentally starting.
d) Keep unused chainsaws out of the reach of children.
Do not let persons use the device who are not familiar
with the device or have not read these instructions.
chainsaws are dangerous if used by inexperienced
persons.
e) Take good care of the chainsaws. Check to make sure
that the moving parts are functioning properly and not
stuck and whether parts are broken or damaged so as
to affect the function of the chainsaw. Have damaged
parts repaired or replaced before you use the device.
A large number of accidents are caused by poorly
maintained chainsaws.
f) Keep your chain teeth sharp and clean. Well maintained
cutting tools with sharp cutting edges are less likely to
catch debris and are easier to guide.
g) Use extreme caution when cutting small size brush and
saplings. Slender material may catch the saw chain and
be whipped towards you or pull you off balance.
h) Use the chainsaw, accessories, etc. in accordance with
these instructions. At the same time, consider the
working conditions and the work to be performed.
Using chainsaws for applications other than the intended
ones may result in dangerous situations.

AFTER SALES SUPPORT
0151 649 1500 1890 946244 www.einhell.co.uk
23
41cc Petrol Chainsaw – GLPC 41 Safety
5. Service
a) Only have your chainsaw repaired by a qualified
professional and only with original spare parts. This will
ensure that the safety of the chainsaw is not compromised.
WARNING!
Danger for children and persons with impaired physical,
sensory or mental capacities (e.g. partially disabled
persons, older persons with reduced physical and mental
capacities) or lack of experience and knowledge (e.g.
older children).
– The chainsaw may not be used by children and persons
with impaired physical, sensory or mental capacities or
lack of experience and knowledge.
– The operator must be at least 18 years of age; trainees who
are at least 16 years of age may only operate the device if
they are supervised.
– Children may not play with the chainsaw. Cleaning and
user maintenance must not be performed by children.
– Do not allow children to play with the packaging wrapper.
They may get caught in it when playing and suffocate.
– Make sure that children do not insert any objects in the
chainsaw.

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
24
41cc Petrol Chainsaw – GLPC 41Safety
WARNING!
Risk of electric shock from the spark plug boot/spark plug!
If the spark plug boot is damaged, or not mounted back in the
correct position this may result in a high voltage electric shock
if the engine is held during the starting procedure, or whilst
the engine is running.
– Never operate the chainsaw in the wet or in the rain as this
can increase the risk of electric shock from the spark plug
boot.
WARNING!
Risks associated with using the chainsaw
If used improperly or in a negligent manner, the chainsaw can
inflict serious injury!
– Carefully read through the instructions on proper
handling, preparatory steps, maintenance, starting and
switching off the chainsaw. Familiarise yourself with
all controls and switches as well as proper use of the
chainsaw.
– The rotating chain poses a risk of injury for other persons,
animals and your hands and fingers. Pay attention to the
direction of rotation of the chain around the chain bar.
– Set up the chainsaw in a stable position.
– Prevent accidental start-up. Pull off the spark plug
boot and remove the spark plug before you make any
adjustments to the device, or make changes to the chain
or chain bar.