Gardenline GLPC 41 User manual

Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within it‘s intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to
be found both in this manual and on the product itself.
If you are not entirely satisfied with this product, please return it to the
store where it was purchased and we will be pleased to replace or refund
it. This does not affect your statutory rights.
PRODUCED IN CHINA FOR:
ALDI STORES LTD., PO BOX 26, ATHERSTONE,
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com
Spend a little Live a lot
41cc Petrol Chainsaw
User Manual
Spend a little Live a lot
AFTER SALES SUPPORT
0151 649 1500
1890 946244 www.einhell.co.uk
Model: GLPC 41 PRODUCT CODE: 64055 04.2016
YEARS
WARRANTY
Contents
Original instruction manual
WITH
QUICK
START
GUIDE Pack contents/parts............................................................................3-4
General information .............................................................................. 5
Reading and storing the original instruction manual ......................6
Explanation of symbols ..........................................................................6
Use and storage of the user guide .......................................................7
Proper Use ................................................................................................7
Reasonably foreseeable misuse.......................................................... 8
Safety...................................................................................................... 9
Explanation of the symbols and types of instructions used............9
Explanation of the pictograms for handling on the machine .......10
Safety devices .........................................................................................11
Safety instructions ...........................................................................12-33
Set up.............................................................................................. 34-40
Before starting the equipment.................................................... 34-40
Use.................................................................................................... 41-54
Description of the components and control elements ................... 41
Operation..........................................................................................42-53
Malfunction and remedy (FAQ).......................................................... 54
Cleaning................................................................................................ 55
Maintenance and servicing ........................................................... 56-68
Technical data ................................................................................. 69-71
Declaration of conformity.....................................................................71
Warranty.......................................................................................... 72-74
Recycling .............................................................................................. 75
64055_4501826_11025_ug.indd 1-4 17/11/2015 12:53 p.m.

4Pack contents/parts
Pack contents/parts
1Chain bar
2Saw chain
3Chain tensioning wheel
4Spiked bumper
5Chain brake lever/front hand guard
6Front handle
7Starter handle
8Screwdriver (oil pump adjusting)
9Air filter cover
10 Stop switch
11 Safety lock
12 Oil tank cap
13 Fan housing
14 Fuel tank cap
15 Rear handle/bootstrap
16 Chain guard
17 Choke (carburettor setting)
18 Bar fastening knob & lever
19 Throttle lever
20 Chain catch
21 Fuel mixing bottle
22 Spark plug spanner
23 Fuel pump 'primer bubble'
24 Original operating & safety instructions
25 Quick set-up guide
Overview
3
Manufacturer's information:
Einhell UK Ltd, Unit 9, Stadium Court, Wirral International Business Park,
Plantation Road, Bromborough, CH62 3QG
AFTER SALES SUPPORT
Model: GLPC 41 PRODUCT CODE: 64055 ON-SALE DATE: 04/2016
YEARS
WARRANTY
0151 649 1500 1890 946244
www.einhell.co.uk
Fig. 1
17
1 2
17 10 115 6 7 9
13
23
3 4
12 14
16
18201915
82421 2522
64055_4501826_11025_ug.indd 5-8 17/11/2015 12:53 p.m.