Garlock Little Giant User manual

LITTLE GIANT TRAILER
OPERATORS INSTRUCTION MANUAL
WARNING! Serious injury may result if this product is misused. The manufacturer provides the
following instrucons for use and care of this equipment and relies upon the purchaser to see
to it that these instrucons are made clear to the person who will be using the equipment.
2601 Niagara Lane N, Plymouth, MN 55447
PHONE: [phone]
www.garlockequip.com
P/N: 160007
REV B ECO 5444
DATE: 4/3/23
Reciba entrenamiento y enenda el manual de instrucciones, o
haga que le lean el manual, antes de operar esta unidad.

2
Table of Contents
Little Giant Trailer ............................................................................................................................ 3
Introduction...................................................................................................................................... 3
Safety Precautions............................................................................................................................. 4
Specifications.................................................................................................................................. 6
Part List .......................................................................................................................................... 7
Assembly Instructions...................................................................................................................... 8
Decal Locations............................................................................................................................... 9
Decals............................................................................................................................................ 10
Warranty......................................................................................................................................... 11

3
LITTLE GIANT TRAILER
Thank you for purchasing this quality Garlock product. With proper use and care, the product
will serve you for years with reliable service. For the safety of the operator and other people
on the job site, it is imperave that the operator read and understand these instrucons
before using.
DATE OF PURCHASE____________ SERIAL NUMBER_______________________
WARNING!: Do not attempt any operation which is not described in this manual.
Other operations could cause serious injury or death. Read, understand and
follow the manual when operating this machine or performing maintenance.
Signal Words in Manual
DANGER
WARNING
CAUTION
NOTICE
This is the safety alert symbol. It is used to alert you to
potenal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER! Indicates a hazardous situaon which, if not
avoided, will result in death or serious injury
WARNING! Indicates a hazardous situaon which, if
not avoided, could result in death or serious injury
CAUTION! Indicates a hazardous situaon which, if not
avoided, could result in minor or moderate injury
NOTICE: Is used to address pracces not related to
personal injury

4
• INTENDED USE: This product is intended to be used on at, level roofs for the sole
purpose of transporng roong materials, Garlock hot tanks and dump trays (or as
a general - purpose trailer on the ground). Any other use of this equipment voids the
manufacturer's warranty and is the sole responsibility of the owner/user, should
damage or injury occur.
• For use on at, level roofs only.
• Maintain proper and even re pressure on trailer res.
• Ensure coer pins and wheels are secure before use.
• Know the load limit of the deck and do not exceed it. Be sure to take into account all
of the load weight including trailer, trailer accessories, and materials (and towing
vehicle).
• Do not exceed load limit of trailer - 2000 lbs. gross load limit. Dump tray capacies
are 800 lbs. maximum.
• Set up warning lines per OSHA standards. Mechanical equipment should be no
closer than 6 feet from the edge of the roof - when working parallel to the edge; no
closer than 10 feet when working perpendicular to the edge. Roof edge material
handling area must also be set up to meet OSHA standards. Guardrails should be
posioned on each side of the discharge or loading area at the roof edge (or other
suitable moon - stopping system approved by OSHA). Any openings in the roof
must be guarded (or covered to be weight supporng).
• Keep the trailer’s load balanced toward the center at all mes. An uneven load
could cause the trailer to become unstable. For example, a 500 lb. load posioned
behind the back wheels could result in severe injury.
• Before operang the equipment, inspect for damage of structure or welds. Do not
operate dam- aged equipment. Do not modify the equipment. Do not operate
equipment that has been modied.
• Do not tow at over 5 mph. Avoid towing hot tanks.
• Do not allow passengers on trailer or trailer accessories.
• Do not operate equipment near electrical power lines.
Safety Precautions
Do Not Operate Before Reading

5
• Make certain roof edge material handling area is at, level, and clear of debris and obstacles.
• Keep people away from “dump” side of trailer when seng up dump.
• Make certain no persons are in danger of being struck by discharged material. Keep un-
authorized people away from the area. Set up warning line on the ground around the dis-
charge collecon point.
• Refer to accessory instrucons when accessories are used with the trailer. This include hot
tanks and dump trays.
• Wear safety footwear.
• Allow handle to drop and set brake when not in use.
• Keep loading areas clear of obstacles.
• Operator must see that safety decals are visible and that instrucons are in place on the
unit (inside instrucon tube). Free replacement decals and instrucons are available
from Garlock Equipment Co. Call or write to our oce in Minneapolis, MN.
• Do not hoist trailer to roof without rst removing any accessories.
• Consult Garlock Equipment Co. for safety instrucons for the use of hot tanks with Gar-
Safety Precautions Continued

6
Little Giant Trailer
Specifications
Length 95" 2413 mm
Width 47" 1194 mm
Height 22" 559 mm
Handle Length 32" 813 mm
Weight 227 Lbs. 103 Kg.
Wheels Front 18 x 8.5 x 8 x 1 (4 PLY) 18 x 8.5 x 8 x 1 (4 PLY)
Wheels Rear 18 x 8.5 x 8 x 1 (4 PLY) 18 x 8.5 x 8 x 1 (4 PLY)
Tire Pressure 25 PSI 172 kpa
Load Limit 2000 Lbs. 907 Kg.
Dump Tray Capacity 800 Lbs. 363 Kg.
Bed Size 30" x 60" 762 mm x 1524 mm

7
ITEM PART No. DESCRIPTION QTY
1408407 LGT FRAME WELDMENT 1 2153966 HANDLE BAR 1 3150033 BLACK GRIP 5/8" 2 4200632 WHEEL-18 X 8.5 F'LITE 4 4140014 WHEEL-18 X 8.5 AIR 4 5150825 PLASTIC CAP 2 6100052 HHCS .62 X 7.5 1 7100171 PLASTIC LOCK NUT .62" 1 8100160 COTTER PIN .188 X 1.5 4
Parts List

8
Assembly Instructions
Step 2.
• Slide on wheel and insert cotter
pin
• Bend one leg of cotter pin 90°
• Repeat process for each of the
four wheels
NOTE: Easiest to hoist the Little Giant Trailer up to attach the wheels
Step 1.
• Attach the handle by lining up
the bracket and bolting it with
the 7.5” bolt and lock nut
• Slide on the grips to both sides
of the handle
*Ensure cotter pins and wheels are secure before use*
Step 3.
• Place manual in tube and apply
caps to both ends

9
Decal Locations

10
Decals

11
This card must be filled out completely and mailed within ten (10) days from date equipment is delivered or warranty is null and void.
EQUIPMENT PURCHASED……………………………………………………………………………………….SERIAL NO…………..………………………
DATE DELIVERED……………………………. NAME OF PURCHASER…………………………………………………………….……….…….…………..
ADDRESS………………………………………………………………CITY……………………………………………STATE……... ZIP…………………….
PURCHASED FROM (DEALER NAME) …………………………………………………………………………………………….……………………………
ADDRESS………………………………………………………………CITY……………………………………………STATE……... ZIP…………………….
Was a copy of the owner’s manual and operation instructions included with the above equipment? YES □ NO □
Will the owner of the equipment provide instruction and copies of the owner’s manual for all operators of the equipment? YES □ NO □
Was the equipment specified above, received in good condition? YES □ NO □
If there was some defect or damage to the equipment, please indicate the nature of the same …………………………………………………………

2601 Niagara Lane N, Plymouth, MN 55447
PHONE: [phone]
www.garlockequip.com