Garmin eTrex Legend Installation guide

Before beginning, please place the safety cord around your neck.

1. Press and hold the THUMB STICK until the MARK WAYPOINT
screen appears.
2. Your waypoint is automatically assigned a three-digit number. To
change the name of the waypoint, use the THUMB STICK button to
highlight its name. Use the THUMB STICK to select the new name for
the waypoint.
Example: Period # Group # Waypoint #
3. When you are done, use the THUMBSTICK to highlight the OK button
and press the THUMB STICK
1. Use the PAGE button to find the main menu. Use the THUMB STICK
to go to the FIND option and press the same button to select this option.
(You can also press and hold the bottom left button on the receiver to go
directly to the Find screen.)
2. Select WAYPOINTS by pressing the THUMB STICK button.
(The menu displays nearest waypoint first.)
3. Select the waypoint you want to using the THUMB STICK button.
4. Use the THUMB STICK button to select GOTO at the bottom of the
screen.
5. Use the navigation screen to help you locate your destination (use the
menu button to access). You need to move in the direction of the large
arrow. When you get close to your destination, an “Arriving at
Destination” message will be displayed.
(Remember…you must be moving in order for the receiver to keep track
of your location.)