Garrick BG8-UT User manual

Instruction Manual
Australia:
Garrick Herbert Pty Ltd
460-462 The Boulevarde
Kirrawee, Sydney, NSW
Ph: 02-9545 6633
www.linishall.com.au
New Zealand:
R.R. Bramley & Co Ltd
184 Marua Rd
Mt Wellington, Auckland
Ph: 09-579 2036
www.bramley.co.nz
USA:
Garrick USA LLC
5455 West 6th St
Winona, MN 55987
Ph: 800-749 1064
www.linishall.com
1216
200mm (8”)
UTILITY
BENCH GRINDER
Suitable for light commercial & DIY use
MODEL BG8-UT

2
This instruction manual should be read before assembling or using your bench grinder.
All instructions should be strictly adhered to so the safety of yourself and others is
protected. Keep this manual handy for future reference.
1) The grinder and all accessories are designed and manufactured to be used only by persons
trained in their proper use and only for their intended purpose. They are not intended for lengthy
continuous usage. i.e. Turn ON, Sharpen Tool, Turn OFF
2) Follow assembly instructions closely and do not plug machine into mains power until all
guards are rmly attached in the correct position (and remain so) and all parts are securely
tted.
3) Make sure the grinder is securely clamped or bolted to your workbench or pedestal stand
and that the workbench or stand is securely attached to the oor.
4) Make sure the switch is in the off position before connecting to mains power. Any
adjustments or maintenance should be made with the grinder unplugged from its power source.
Ensure any keys or wrenches are removed.
5) Ensure the machine is electrically grounded. The plug must match the outlet and must never
be modied in any way. Long extension leads should not be used due to voltage drop.
6) Ensure the work area is clean and well lit. Do not use in wet or damp conditions. Keep
children and bystanders away.
7) Eye protection should always be used. Normal optical spectacles are not sufcient. Neck ties
should be removed and sleeves rolled up. Long hair and loose clothing should be secured. Do
not wear gloves. Non slip footwear or anti-slip footwear is recommended. Hearing protection
should be used for prolonged use.
8) Never use the grinder if impaired by tiredness, alcohol, drugs or medication.
9) The action of grinding will produce dust and/or particles from both the material being ground
and the grinding wheel or belt. Depending on the product being ground, these particles & dust
may be harmful to your health. Ensure the area is well ventilated and that suitable dust mask or
breathing apparatus is used.
10) Never leave a running grinder unattended. Do not leave the work area until it has come to a
complete stop.
11) Your grinder should only ever be serviced by a qualied repair person. To ensure safety
integrity, we recommend using only genuine GARRICK replacement parts or accessories.
12) Familiarise yourself with the section about correct use of grinding wheels

3
The correct use & care of grinding wheels
Always use the correct type of grinding wheel according to the model of grinder
and your intended use. Do not use grinding wheels as a cutting disc.
During normal use, grinding wheels will wear by becoming chipped, worn at the
edges, grooved, out of balance and clogged by foreign material. This can be
rectied by use of the wheel dresser tted on the top of the grinder. Rest the
cast face of the dresser on the tool rest and bring the wheels into contact with
the wheel (whilst running). Move the dresser backwards & forwards (left and
right) accross the wheel until a fresh, at, square face is exposed on the wheel.
Sometimes a wheel may be cracked. Never under any circumstances use
a cracked wheel for grinding as it could ‘explode’ causing serious injury
to the operator. Wheels can be tested for cracks with the “Ring Test”. This in-
volves hanging a wheel (removed from the grinder) by a piece of string passed
through its centre hole. The wheel can then be tapped with a piece of scrap
wood or similar and if OK the wheel will “ring”. If there is a defect it will sound
as a “thud”. The defect may not be able to be detected by visual inspection. It is
important that a wheel failing the ring test be permanently discarded.
The GARRICK grinders are supplied with general purpose grinding wheels. For
specialised grinding applications, such as carbide grinding, please consult your
local specialist abrasive distributor.
Always grind by using the outer diameter edge of the grinding wheel. Never
grind on the side of the grinding wheel. This can cause the wheel to shatter.
Do not use excessive force on the grinding wheel. If it is not removing material
fast enough, it is either clogged (requiring cleaning with the wheel dresser as
above) or is not coarse enough. Choose the correct grit (coarseness) for the
job.
Always adjust the tool rest as close as possible to the wheel (maximum 3mm
gap) and do not attempt to grind objects that are to small to hold securely. Do
not use the workpiece to slow down the wheel after turning the grinder off.

4
MODEL SPECIFICATIONS
Model BG8-UT Bench Grinder
Wheel Size (DxWxBore) 8”x3/4”x5/8” (200x19x16mm)
Standard Wheel Grit 36 & 60
Thread (Nut) M16 x 2.0
Motor 375W (0.5HP) Single Phase
Voltage & Motor Speed Aust / NZ USA
240v 50Hz 2,880rpm 120v 60Hz 3,450rpm
Unpacking & checking of contents
Ensure carton is upright, carefully cut tape & open top aps of carton.
Some parts are located in recesses in the polystyrene packing showing. Remove these
and set aside for assembly on the grinder.
The whole carton should then be carefully turned upside down (with aps open & out of
the way) and then the carton can be lifted off the grinder in its polystyrene packaging.
Turn the package back up the correct way, carefully cut the packing tape along the
join in the polystyrene packaging, and remove the top half of the polystyrene from the
grinder.
Open the plastic bag and remove & set aside the eyeshield packs.
The grinder can then be lifted out of the plastic bag & the polystyrene packing and
placed ready for assembly of loose components.
2 Year Warranty
LINISHALL Grinders are manufactured to our high quality standard. As such they are
warranted against defect in material and workmanship for a period of 2 years from
date of purchase. (This warranty does not apply to consumable items such as grinding
wheels, wheel dressers, abrasive belts & discs or rubber contact wheels) We do not
cover defects caused by misuse, abuse, product modication, lack of maintenance or
repair by an unauthorised agent.
The warranty covers repair or replacement (at our sole discretion) of parts and labour,
but does not include freight to or from our designated repair centres or the place of
original purchase. This warranty covers only the initial purchaser of the grinder.
Warranty claims must be accompanied by documented proof of original purchase and
an explanation of the problem causing the claim to be made.
Normal service and genuine replacement parts & accessories can be obtained via
your original place of purchase or by contacting one of our ofces for details of your
nearest authorised service agent.