Gasmate Specialist Deluxe II Series User manual

103192 08/14
Important: Retain these instructions for future use.
Specialist Deluxe Series II
Storage Module
BQ8302
• Marble top with powder coat body
• Glass doors
• Full width stainless steel front drawer
• 4 Castors (2 locking)
• Dimensions (L 800 x D 900 x
H 880mm)
• Freestanding unit
• Connects to right side of Specialist
Deluxe Series II BBQs
(see instructions page 9)
Gasmate®is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber – Hamilton, N.Z. www.gasmate.co.nz
FEATURES

32
EXPLODED DIAGRAM

32
PARTS LIST
1. Base Panel Assembly
1pc
2. Castor with Lock
2pcs
3. Castor No Lock
2pcs
4. Right Door Assembly
1pc
5. Left Door Assembly
1pc
6. Cabinet Left Side
Panel 1pc
7. Back Panel
1pc
8. Cabinet Beam
Assembly
1pc
9. Magnet
1pc
10. Cabinet Right Side
Panel 1pc
11. Storage Body
1pc
12. M6*12 Screw (black
galvanize) 33pcs
13. M4*10 Screw 4pcs 14. Nut M4* 2pcs 15. Nut M6* 4pcs 16. M6*15 Screw 4pcs

54
STEP 1
Use M6*12 screw(x16pcs) to x swivel castor(with lock) x 2pcs and swivel castor (without lock) x 2pcs
under the base panel.
Note: Fit the locking Swivel castors at the rear of the base, so the locks can be accessed from the back of
the Cart without the skirt panel being in the way.
ASSEMBLY INSTRUCTIONS
Remove any transit protection material.
Tools Required: Phillips Head Screwdriver & Adjustable Spanner.
STEP 2
Use M6*12 screw(x4pcs) to x the cabinet left side panel and cabinet right side panel onto the base panel.

54
STEP 3
Use M6*12 screw (x5pcs) to x the back
panel onto base panel, cabinet left side
panel and cabinet right side panel.
STEP 4
Use M4*10 screw (x4pcs) to x the magnet to cabinet beam, then use M6*12 screw(x4pcs) to x the beam
between two cabinet side panels, as shown.

76
STEP 5
To t the cabinet doors, insert the xed upper pin into the bracket as
shown in the picture, then insert the bottom pin into the base, and
use M4 nut(x2pcs) to fasten the doors, as shown.
STEP 6
Use M6*12 screw (x4pcs) to fasten
the storage body assy to cabinet
cart as shown.

76
STEP 1
Loosen M4*10 screw (x1pc) and M6*12 screw (x4pcs) to remove the side shelf assembly.
CONNECTION WITH BBQ
STEP 2
Use M6*15 screw (x4pcs) and M6 Nut (x4pcs) to connect the storage module to the right of the BBQ.

88
For any queries or assistance call
Customer Service
(Australia Only)
1300 174 876
Hours of operation:
Monday to Friday 8.30am - 5.30pm EST
Do not return to place of purchase.
Keep your purchase receipt, this will be required to
make any claims under the 12 month warranty.