Gateway M675 Parts list manual

1
www.gateway.com
Replacing the Gateway M675
Keyboard
This package includes a replacement keyboard for your Gateway M675
notebook and these printed instructions.
Tools you need
You need a small Phillips screwdriver and a small flat-blade screwdriver to
replace the keyboard.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as electrostatic discharge (ESD).
Before replacing the keyboard, follow these guidelines:
■Turn off your notebook.
■Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
■Touch a bare metal surface on your workbench or other grounded object.
Warning ESD can permanently damage electrostatic
discharge-sensitive components in your notebook.
Prevent ESD damage by following ESD guidelines every
time you replace the keyboard.
Warning To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook and unplug the power
cord and modem and network cables before replacing the
keyboard.
Warning To prevent risk of electric shock, do not insert any object
into the vent holes of the notebook.

2www.gateway.com
■Unplug the power cord and the modem and network cables.
■Remove the battery. For more information, see “Changing batteries” in
your user guide.
■Disconnect all peripheral devices and remove any PC Cards.
Before working with notebook components, follow these guidelines:
■Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
■Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
■Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
Removing the keyboard
To remove the keyboard:
1Follow the instructions under “Preventing static electricity discharge” on
page 1.
2Turn off your notebook.
3Disconnect the AC adapter and modem and network cables.
4Disconnect your notebook from the optional port replicator.
5Turn your notebook over so the bottom is facing up.
6Remove the battery.
7Turn your notebook over so the top is facing up.
8Open the LCD panel to the fully open position.

3
www.gateway.com
9Slide the keyboard bezel to the right, then lift the bezel off your notebook.
10 With a small Phillips screwdriver, remove the five keyboard screws and put
them in a safe place.
Screws

4www.gateway.com
11 Lift the back edge of the keyboard, then move it to the back of your
notebook. Be careful not to damage the LCD panel.
12 Carefully insert the small flat-blade screwdriver between the keyboard
cable and the black plastic hinge where the cable connects to the system
board. Gently lift the hinge off the cable. The cable is now free and you
can remove the keyboard.

5
www.gateway.com
Installing the keyboard
To install the keyboard:
1Place the new keyboard keys-up on your notebook with the space bar
towards you. Be careful not to damage the LCD panel.
2Verify the black plastic hinge on the system board keyboard connector is
in the raised position.
3Insert the end of the keyboard cable between the black plastic hinge and
the white connector.
4Press the black plastic hinge onto the keyboard cable.
Important The plug is correctly oriented if the cable is not twisted.

6www.gateway.com
5Lift the keyboard and insert the tabs on the front of it under the palm rest.
6Gently press the keyboard down until it is flat all the way across. The
keyboard should easily fall into place.
7Replace the five keyboard screws.
8Lay the bezel back in its channel, with the right side of the bezel hanging
over the edge of the notebook by approximately 1/4 inch.
Ta b s
Screws

7
www.gateway.com
9Slide the bezel back into place.
10 Press down on the bezel in several places to make sure it is in place. The
bezel is correctly mounted when you can run your finger along the bezel
and find no loose spots. The bezel should be flat all the way across.
11 Replace the battery, connect the power adapter and modem and network
cables, then turn on your notebook.
Safety, Regulatory, and Legal Information
See your user’s guide for important technical support, safety, regulatory, and
legal information.
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the
black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and
other countries. All other brands and product names are trademarks or registered trademarks of their respective
companies.
Warning If the bezel is not correctly replaced, your notebook could
be damaged when you try to close the LCD panel.

8www.gateway.com
MAN RPL M675 KB INST R0 11/03