Gateway MX6708 User manual

FRONT BACK
LEFT RIGHT
4START THE NOTEBOOK.
Press the power button, then follow the on-screen instructions to
complete Windows setup.
2CONNECT TO AC POWER.
Leave the AC adapter plugged in for at least three
hours the first time, so the battery will fully charge.
1INSTALL THE BATTERY.
With the label side down, slide the battery into the
battery compartment until it clicks. Then lock it in place.
3CONNECT TO THE INTERNET. (optional)
Connect the phone cord (included) to the
modem jack ( ) if using dialup Internet access.
Or connect your Ethernet ( ) or USB ( ) cable
(not included) if using high-speed access.
Memory card reader
Modem jack
IEEE 1394 port Ethernet jack
USB ports
USB ports
PC Card slot
Monitor port
Power connector
DVD drive
S-Video out jack
Kensington™ lock slot
Ventilation fan
Caution: Do not block
Microphone jack
Headphone jack
LCD panel release latch
Battery Indicator
Speaker Speaker
Power Indicator