Gateway MX7118 User manual

FRONT BACK
LEFT RIGHT
4START THE NOTEBOOK.
Press the power button, then follow the on-screen instructions to
complete Windows setup.
2CONNECT TO AC POWER.
Leave the AC adapter plugged in for at least three
hours the first time, so the battery will fully charge.
1INSTALL THE BATTERY.
With the label side down, slide the battery into the
battery compartment until it clicks. Then lock it in place.
3CONNECT TO THE INTERNET. (optional)
Connect the phone cord (included) to the
modem jack ( ) if using dialup Internet access.
Or connect your Ethernet ( ) or USB ( ) cable
(not included) if using high-speed access.
LCD panel release latch
Battery Indicator
Speaker Speaker
Power Indicator
Memory card reader
Ventilation fan
Caution: Do not block PC Card slot
IEEE 1394 port
USB ports
Microphone jack
Headphone jack
Ventilation fan
Caution: Do not
block
Kensington™ lock slot
Monitor port
Modem jack
USB ports
Power connector
Ethernet jack
S-Video out jack
Optical drive