Gateway M685 User manual

FRONT BACK
LEFT RIGHT
4START THE NOTEBOOK.
Press the power button, then follow the on-screen instructions to
complete Windows setup.
2CONNECT TO AC POWER.
Leave the AC adapter plugged in for at least three
hours the first time, so the battery will fully charge.
1INSTALL THE BATTERY.
With the label side down, slide the battery into the
battery compartment until it clicks. Then lock it in place.
3CONNECT TO THE INTERNET. (optional)
Connect the phone cord (included) to the
modem jack ( ) if using dialup Internet access.
Or connect your Ethernet ( ) or USB ( ) cable
(not included) if using high-speed access.
Memory card reader
Microphone jack
Headphone jack
LCD panel release latch
Battery charge indicator
Speaker Speaker
Power indicator
Ventilation fan
Caution: Do not block
PC Card slot
IEEE 1394 port
USB ports S-Video out jack
Kensington™ lock slot
Monitor port
Modem jack
Power connector
Ethernet jack
DVD drive USB ports