GE Appliances
Specification Revised 9/00
GSD2325FBB—GE Nautilus™Built-In Dishwasher
Wood Insert Cut-Out
Dimensions (in inches)
Note: Dishwasher must not be installed more than 10 feet from
sink for proper drainage. All plumbing and electrical work must
be in accordance with local codes.
Electrical Rating
Voltage AC.......................................................120
Hertz ..................................................................60
Total connected load amperage.......................8.6
Calrod®heater watts.......................................500
For use on adequately wired 120-volt, 15-amp
circuit having 2-wire service with a separate
ground wire. This appliance must be grounded
for safe operation.
Rough-In Installation Information
(in inches)
Built-In Dishwasher Dimensions
(in inches)
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile™or GE appliance questions, call
GE Answer Center®service, 800.626.2000.
Panel
Models/Kits A B C Thickness
GE Models
GPF325 Kit 18-7/8”23-9/16”3-11/16”1/4”
4-1/4”to
GPF375 Kit 18-15/16”23-5/8”* 3-3/4”** 3/4”
*Bottom of panel must be notched 1-1/2" x 1/2" to clear
across panel
**Adjustment required to match adjcent cabinets fronts due to
leveling leg adjustment, 4" nominal.
