GE DDE7206M User manual
Dryer
Contents
Appliance Registration
2
Perm.
Press Drying Tips 5-7, 11, 12
Automatic Drying
5
Problem Solver
10-12
Care and Cleaning
13
Safety Instructions
3,4
Consumer Services
15
Sorting 4,8
Controls Setting Guide 6,7 Storing Dryer
13
Dryer Exhaust
13
Timed Drying
5
Energy-Saving Tips
9
User Maintenance Instructions 13
Knits Drying Tips
5-7,
11
Warranty Back Cover
Lint Filter
9, 13
Loading 4,9
Model and Serial Numbers
2
GEAmwer
Center
m
Operating Instructions
4
800.6262000
Models
DDE7206M
DDG7286M
DDE7208M
DDG7288M
GEAppkances
Help us help you...
If You Need
Semice
Before
usiW
your dryer,
read this book carefully.
It is
intended to help you operate and
maintain your new dryer properly.
Keep
it
handy for answers to your
questions.
If you don’t understand something
or need more help, write (include
your phone number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville, KY40225
If you received a
damaged dryer...
Immediately contact the
deder
(or builder) that
soldyouthe
dryer.
Save time and money.
Before you request service...
check the Problem Solver on
pages 10-12.
It
lists causes of
minor operating problems that
you can correct yourself.
Write down the model
and serial numbers.
You’ll find them on a label on the
front of the dryer behind the door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your dryer. Before sending in this
card, please write these numbers
here:
Model Number
Serial Number
To obtain a Spanish language
version of this book, call
GE Answer Center”
800.626.2000
consumer information service.
Para
obtener
la
versi6n
en
espafiol
de
este
manual,
name a
GE Answer
Center$
servicio
de
informaci6n
para
el
consumidor,
tel~fono
800.626.2000,
FOR YOUR
SA~W
If you smell gas:
1.
Open windows.
2. Don’t touch
electrical switches?
3. Extinguish any
open flame.
4. Immediately call
your
gas supplier.
●
Don’t turn electric switches
on or off because sparks may
ignite the gas.
I
FOR YOUR
SA~~
Do not store or use
gasoline or other
flammable vapors and
liquids in the vicinity
of this or any other
appliance.
Use these numbers in any
correspondence or service calls
concerning your dryer.
All drying instruction terms in this book conform to the Care Labeling
Rule establish by the Federal Trade Commission, January 1984.
2
To obtain service, seethe
Consumer Services page in the
back of this book.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for
firther
help.
FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write all the details-including
your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, Kentucky 40225
FINALLY, if your problem is still
not resolved, write:
Major Appliance
Consumer Action
Panel
20 North
Wacker
Drive
Chicago, Illinois 60606
WO~~T
S~TY
~STRUCTIONS
Read
dl
itirudiom
before
usi~
this applimce.
I
m
Womm
SA~~
N~I~
The California Safe Drinking
Water and Toxic Enforcement Act
requires the Governor of Cdifomia
to publish a list of substances
known to the state to cause cancer,
birth defects or other reproductive
harm and requires businesses to
warn customers of potential
exposure to such substances.
Gas appliances can cause minor
exposure to four of these
substanws,
namely benzene, carbon monoxide,
formaldehyde and soot, caused
primarily by the incomplete
combustion of natural gas or
LP
fuels. Properly adjusted dryers will
minimize incomplete combustion.
Exposure to these substances can
be minimized further by properly
venting the dryers to the outdoors.
–
W~G–Toreducethe
risk
of fire, electric shock, or
i~ury
to persons when using your
aph
fo~ow
basic precautions,
including the following:
●
Use this appliance only for its
intended purpose
as described in
this Use and Care Book.
Q
This dryer must be properly
inshlled and located in
accordance with the Installation
Instructions before it is used.
If
you did not receive an Installation
Instructions sheet with your dryer,
you can obtain one by contacting
the service location nearest you.
—Properly ground to conform
with all governing codes and
ordinances. Follow details in
Installation Instructions.
—Locate where the temperature
is above
50°F.
(lO°C.)
for
satisfactory operation of the
dryer control system. Do not
inshll or store
the
dryer where it
will be exposed to the weather.
–Connect to a properly rated,
protected and sized power-supply
circuit to avoid electrical overload.
—Exhausting to the outside is
STRONGLY RECOMMENDED
to prevent large amounts of
moisture and lint from being blown
into the room. Carefully follow the
Exhausting
Detis
in the
hstiation
Instructions.
●
When disconnecting this
appliance pull by the plug rather
than the cord to avoid damage to
the cord or junction of cord and
plug. Make sure that the cord is
located so that it will not be
steppd
on, tripped over or otherwise
subjected to damage or stress.
●
Do
not repair or replace any
part of the appliance or attempt
any servicing udess specifically
recommended in this Use and
Care Book or in published
user-
repair instructions that you
unders~nd and have the skills to
carry out.
~
mititi
the possibility
of a fim
h-d.
●
DO
not use heat to dry
articles
containing rubber, plastic, or
similar
mate-
(such
as
padded
bras, tennis shoes, galoshes, bath
ma@
~
bibs, baby pan@
p-
bags, etc.) as these materials may
melt or burn.
Mso,
some rubber
mate-,
when
hated,
can under
certain circumstances produce
fire
by spontaneous combustion.
●
Garments labeled “Dry Away
From Heat” (such as life jackets
containing
~pok)
must not be put
in your dryer.
●
Do
not
-h
or
dry
articles
that have been claned in, -heal
in, soaked in, or spotted with
combustible or ~losivesubstances
(such as wax, paint, gasoline,
degreasers,
drywleaning
solven@,
kerosene, etc.) which
may ignite or explode.
Do
not use
or
@m
such substances
onlor
atind
your washer and/or dryer
during operation.
●
Any article on which you have
used a cleaning solvent, or which
contains flammable materials
3
(such as cleaning cloths, mops,
towels used in beauty salons,
resuurants
or barber shops, etc.)
must not be placed in or near the
dryer until all traces of these
flammable liquids or solids and
their fumes have been removed.
There are many highly flammable
items used in homes such as:
acetone, denatured alcohol,
gasoline, kerosene, some
household cleaners, some spot
removers, turpentines, waxes, wax
removers and products containing
petroleum distillates.
c
Clean the lint filter before each
load
to prevent lint accumulation
inside the dryer or in the room.
DO
N~
OPERATE THE
DRYER WITHOUT THE LINT
FILTER IN PLACE.
c
Keep area around and
underneath your appliance free
from the accumulation of
combustible materials, such as
lint, paper, rags, chemicals, etc.
●
Do not store items that may burn
or melt (such as clothing, paper
material, plastics or plastic
containers, etc.) on top of the dryer
during operation.
●
The interior of the machine
and the exhaust duct connection
inside the dryer should be
cleaned periodically by a
qualified individual.
●
Exhaust duct (see installation
instructions). Use only metil
duct inside dryer or for
exhausting dryer to the outside.
To
mitimti
the possibility
of
iq”ury.
●
Never reach into the dryer while
the drum is moving. Before loading,
unloading or adding clothes, wait
until the drum has completely
stopped.
●
Close supervision is necessary
if this appliance is used by or near
children.
Do
not allow children to
I
bp~t
Safety
Imtructiom
(continu~)
play inside, on or with this
apptiance
or any
tiarded
apptiance.
Dispose of
_ded
apm
and shipping or packing
materi~
properly. Before
tirding
a dryer, or removing
from service, remove the door
of the drying compartment.
●
Keep
dl
laundry aids (such
as detcrgens, bleaches, fabric
softeners,
ete.)
out of the reach of
children, preferably in a locked
cabinet. Observe
dl
warnings on
container labels to avoid
pcrsond
injury.
●
Keep the floor around your
appliances clean and dry to reduce
the possibility of slipping.
●
Do not dry fiberglass articles in
your dryer. Skin irritation could
result from the remaining glass
particles that may be picked up
by clothing during subsequent
dryer uses.
. The laundry process can reduce
the flame
retardaney
of fabrics. To
avoid such a result, the garment
manufacturer’s care instructions
should be followed very
carefilly.
●
Never climb on or stand on the
dryer top or
door.
.
Do
not tamper with controls.
●
To minimize the possibility
of
eleetric
shock, unplug this
appliance from the power supply
before attempting any maintenance
or cleaning (except the removal and
cleaning of the lint filter).
N~E:
Turning the Cycle Selector knob
to an OFF position does
N~
disconn~t the appliance from
the power supply.
. Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
●
If yours is a gas dryer, it is
equipped with an automatic electric
ignition and does not have a pilot
light. DO
N~
ATTEM~
TO
LIGHT WITH A
MA~H.
Burns
may result from having your hand
in the vicinity of the burner when
D~er-apptiedfabric
sofiners
or anti-static
conditioners
You may wish
to
soften your
laundered
fabriw
or reduce the
static
elwtricity
in them. We
recommend you use either a
fabric softener in the wash cycle,
according
to
the manufacturer’s
instructions for those products, or
try a dryer-added product for
which the manufacturer gives
written assurance on the package
that their product
~n
be safely
used in your dryer.
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
SAW
T~SE
the
automati;
ignition may turn on.
How to operate your
tiyer
W~G—To
reduce the risk of
fire.
electric shock. or
iniurv
to wrsons,
read the
MPORTANT
S~ETY
INSTRUCTIONS before
o-~rating
this appliance.
mSTRUCTIONS
had
Your Dryer Properly
●
Clean the lint filter each time the
sorted right for drying. See page 8
Set the
Controk
dryer is
used. Always be sure the
for sorting help. (If you do mix
lint filter is in place. Don’t use the various types of fabrics in your See the Controls Setting Guide
dryer without it. load, set the controls for the on pages 6 and 7.
lighter-weight fabrics and remove
●
Good sorting for the dryer begins
at the washer. Generally, if clothes
when dry. Reset controls for
tie
are sorted right for washing, they’re remaining heavier fabrics.)
4
~
Fabric Care Selections
Push a button to select the proper heat for your load.
Should be used with cycles indicated ●
Automatic,
Fabric Care
Automatic
Perm Press and
Timed
Selections
Regular Cycle
Knits Cycles
Cycles
Cottons
High
Heat
● ●
Perm
Press
Medium Heat ●●
Knits/Delicates
bw
Heat ●●
Fluff
No Heat
●
~
Turn Cycle Selector to desired
~
Press PUSH TO START button
cycle setting. The selector may be to start dryer. (Opening the door
turned in
efiher
direction. -
during operation-stops-the dryer. To
re-start, close the door and press
the START button. )
Polyester Knits &
Permanent Press
drying tips
● DO NOT
OVERLOAD—
Garments being dried or
de-wrinkled should tumble freely.
Q
REMOVE CLOTHES
PROM~LY—To help prevent
wrinkling, remove from the dryer
promptly at the end of the drying
cycles.
● PLACE ON
HANGERS—
Permanent Press and Polyester
Knit garments look best if placed
on hangers after drying.
What is the difference
between Timed &
Automatic drying?
Timed Drying
When using the TIMED CYCLE,
you select the number of minutes
you wish the dryer to run and it
turns off at the end of this time
period.
Automatic Drying
When using the AUTOMATIC
cycles, the
Automatic
Dq
Control
system
continually senses the
temperature of the air in the dryer
drum. Wet laundry keeps this air
cool. When laundry is dry enough
(and the drum air warm enough)
the heat turns off. When the air
cools, the heat turns back on. This
off and on cycling may happen a
number of times (depending on the
fabric,
load
size and Cycle Selector
setting). The Cycle Selector
advances (when the heat is
ofo
until it automatically turns off
dryer.
Dryness selections guide for
the automatic cycles
Set to Middle Position
,,ss
OF,
,8”
.
.*
.+
.08[
:
DRY
@
. For most normal loads.
Set toward MORE DRY
(,$s
~~f
,,”
.
**
.+-
..,[
,,”
s
●
*
For loads that include
heavy-
weight fabrics.
If
Y;U
desire to remove more
moisture.
Set toward LESS DRY
(,ss
OFF
DRY .
● For lightweight fabric loads.
●
If you desire to remove less
moisture.
●
For very small loads.
5
Controls Setting Guide for different fabrics and loads
Fabric Care/
Drying Selection*
Cottons
High Heat
bad
Cycle
Automatic Regular Cycle
or
Timed Cycle
Cycle Setting
See Dryness Selection Guide on
page 5.
Set at
REGULAR for dry; at
DAMP-DRY for ironing.
Cottons & Linens
Permanent Press, Treated Cottons,
Blends with Cotton
Perm Press
Medium Heat Automatic Perm Press
and Knits Cycle
Timed Cycle
See Dryness Selection Guide on
page 5.
DE-WNNKLE setting to de-wrinkle
garments that have not been washed.
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Sturdy
Delicate
Silks and Wools, Blends including
Silks and Wools
Automatic Perm Press
and Knits Cycle See Dryness Selection Guide on
page 5.
Perm Press
Medium Heat
Knits/Delicates
Low Heat
Knits/Delicates
Low Heat
Automatic Perm Press
and Knits Cycle
Automatic Perm Press
and Knits Cycle
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
Ray[~n
and Acetate
Knits/Delicates
Low Heat
Down-filled garments, if machine
washing and drying are
recommended.
Cottons
High Heat Automatic Regular Cycle
Baby Clothes—Sturdy: Diapers,
Nightgowns, Shirts, Pads, Sheets,
Receiving Blankets, Coveralls. See
Special Instructions.
Cottons
High Heat Automatic Regular Cycle
Baby Clothes—Delicate
Knits/Delicates
Low Heat
Cottons
High Heat
Cottons
High Heat
Automatic Perm Press
and Knits Cycle
Timed Cycle
Set toward LESS DRY.
Blankets—Wool, Part Wool,
Cotton, Electric, Synthetic. See
below under “Extra-large
Items:’
Set at 20 to 25 minutes.
Timed Cycle
Curtains, Slipcovers, Draperies,
DO
NW
MACHINE DRY
FIBERGLASS.
For first setting, set at 20 minutes;
for second setting, set at 15 minutes.
First setting— 20 minutes;
additional settings—5 minutes.
Chenille Bedspreads, Robes. See
below under “Extra-large
Items:’ Cottons
High Heat Timed Cycle
Rubber-coated Items, Laminated
Fabrics, Vinyl, Plastics and
Articles with Plastic Trim.
Bathmats and Rugs
Fluff
No Heat Timed Cycle
Set for time desired.
Cottons
High Heat
Permanent Press
Medium Heat
Timed Cycle First setting—20 minutes;
additional settings—5 minutes.
First setting—20 minutes;
second setting—15 minutes;
additional settings—5 minutes.
Timed Cycle
Extra-large Items—Queen or King
Size Sheets, Blankets or Spreads,
Sleeping Bags, Insulated Jackets or
Suits, Mattress Covers (Pads),
Quilted Bedspreads.
Pillows—Feather and Polyester-
filled (if manufacturer recommends
they be dried in a dryer). See
Special Instructions.
Cottons
High Heat Timed Cycle Set at
~
minutes.
*The terms High, Medium and Low Heat are those usually found on fabric care labels. For best results, follow your fabric care labels.
NOTE: The Cycle Selector settings indicated above are to be used as a guide. You may find that best results are obtained for certain of your fabrics
by setting the Cycle Selector to either side of the recommended settings.
6
S~cial
Instructions
Do not dry non-colorfast items with whites or light-colored items
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops; place clothes on hangers to
minimize wrinkling.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops, place clothes on hangers to
minimize wrinkling.
Dry silks and wools in your dryer
onfy
if recommended by the garment manufacturer. Follow instructions carefully.
fimble
drying is mandatory. Down must be thoroughly dried to remove odor and prevent mildewing. Place two large,
dry
towels in the
dryer to improve tumbling and shorten drying time. Be sure to dry thoroughly.
IMPORTANT. If children’s
sleepwear
is
made
of
Modacrylic,
tumble dry only on Low/Knits. Normal Heat can damage these fabrics.
Check manufacturer’s drying instructions.
See above instructions.
Place in dryer with 3 or 4 dry towels which have been heated for 5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
25 minutes. Do only one blanket at a time. Remove blanket at end of cycle and block blanket back to original shape. Press binding with warm
iron. Allow to
dw
before storing.
Use dry towels as buffers. Set timer for 20 minutes. If items are still wet, reset for 15 minutes and check again. Items should be removed while
still damp. Place slipcovers on furniture immediately. Hang draperies and curtains so that creases will fall out. Stop dryer periodically and check
filter for excess lint. Remove and restart dryer.
Tumble on FLUFF (No Heat) setting as heat may cause alteration in shape, color and appearance of such articles.
Stop dryer periodically and check filter for excess lint. Remove and restart dryer,
Specialprecaufions must be taken for extra-large items. Set dryer for 20minutes then check carefilfy. Set 15 minutes for second setting, check
again; and 5 minutes for each additional setting. Make sure that article does not fill drum. Many large articles, when wet, have ample room in
dryer, but as they dry and fluff up may not have room to tumble. Check carefully every few minutes and if article is still wet or damp and fills
dryer, finish drying on line. Do not, under any circumstances operate dryer for longer times without checking.
CAUTION:
If large items do not
have room to tumble, the air flow may be blocked which could result in scorching your valuable items. Many large items, like shag rugs, cannot
be dried in home size dryers.
DO
N~fumbfe
dryjackers
containing Kapok. (See
filter cleaning instructions above. )
Check ticking for holes or weak seams where feathers or filling could escape. Dry no more than one pillow at a time and set dryer for maximum
time. Stop dryer occasionally and shake pillows to redistribute filling for more even drying. Check pillows at end of drying time. If they are not
completely dry, return them to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried completely to prevent
mildewing.
DO
NWtumble
dry pillows containing
ffipok.
—
Refer to Garment Manufacturers’ Care
hbels
For more information on care labeling, send for “What’s New About CARE
LABELS!’
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington,
D.C.
20402.
7
How to
soti
the clothes
Normally, if you have sorted clothes correctly for washing,
you will also have properly sorted drying loads.
Sort by surface tetiure
from
LINT PRODUCERS—such as
terry toweling and chenille—give
up lint. LINT
COLLE~RS—
such as man-made fibers and
napped fabrics like velveteen and
corduroy—attract lint, and must be
dried separately.
Sort by fabric
from
m
.
Synthetics,
\
Blends &
Poly Knits
from
w
from
w
In addition to sorting to reduce lint
collection, it is recommend that
fabrics of similar construction be
dried together whenever possible.
Sort by color
w
from
from
from
Sort by
we@t
Separate
m
.
Hea~
Items
\
(such as
towels)
from
For information on tumble drying
extra-large items and different
fabrics and loads, see pages 6 and 7.
8
How to load the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
wrin~ed.
Loads should look like this:
Dru’m
with
Cottons & Linens
Clean the lint
filter
before
dryi~
every load.
Clean lint filter (see shaded area)
by putting your moistend fingers
at the corner of filter and wiping in
a downward motion all the way
across to the other corner.
Permanent Press Load
Lint Filter
For additional information on lint
filter, see page 13.
Ene~-Savi~~ps
. Sort clothes by weight so you won’t
●
To help prevent ironing, use
Perm
●
Clean dryer lint filter each time
have to run an extra
vcle
for one or
Press, Medium Heat or Knits/
you dry.
two heavier,
slower-d-rying
items.
Delicates
Low Heat. Remove
See page 8.
garments promptly at end of
●
Clean dryer exhaust
ducting
at least
drying cycle and place on hangers. once a year. A partially clogged
. Do not overload dryer. For
exhaust can lengthen drying time.
efficient drying, clothes need to
●
Dry your clothes in consecutive
tumble freely.
loads. Using a “warm” dryer will
●
Use Automatic Drying Cycles
save energy.
whenever possible to help prevent
overdying and to save energy.
9
-
m
Questions?
-~=
UseThis Problem Solver
-
PROBLEM
DRYER WON’T
START
CL~HES
TAKE
~0
LONG
~
DRY
SHMNKAGE,
GENERAL
POSSIBLE CAUSE AND REMEDY
●
Dryer unplugged. Make sure power cord is plugged in.
Q
No power to dryer. Check fuses and circuit breakers to make sure dryer is getting
current. Most electric dryers use two.
●
Controls improperly set. Make sure controls are set and START switch is pushed.
Opening the door during operation stops the dryer. Tore-start, close the door and push
the
START switch.
c
Dryer door is open.
Close door securely—dryer
will
not run with door open.
c
Circuit is overloaded. Do not operate other appliances on the same electrical outlet
or circuit while the dryer is operating.
●
Controls improperly set. Check all controls to make sure they are correctly set for
the load you want to dry. See pages 4-7.
. Clogged lint filter. Remove and clean filter before every load. Periodically clean area
under lint filter with vacuum cleaner. See page 13.
●
Improper ducting. Make sure dryer is
ducted
in accordance with Instillation
Instructions.
●
Obstruction in exhaust ducting. Make sure ducting is clean and free of obstruction;
make sure damper in outside wall cap operates easily. If flexible ducting is used, be
sure it is not kinked and is properly installed according to Installation Instructions.
. Blown fuses or tripped circuit breakers. Check household fuses or circuit breakers.
Most electric dryers use two. It is possible for one to be blown or tripped and the dryer
still tumble without heat.
●
Improper sorting. Do not mix heavy, hard-to-dry items with lightweight articles.
●
Large loads of moisture-holding fabrics, such as beach towels, take a long time to
remove moisture.
●
Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
●
Too few items in dryer. If drying only one article, add two more similar articles, even
if dry, to insure proper tumbling.
●
Some fabrics will shrink whether machine
washd
and tumble dried or washed by hand
and drip dried; others may be safely washed but will shrink in a dryer. Follow Garment
Manufacturers’ Care Labels exactly. If in doubt, do not machine wash or tumble dry.
10
PROBLEM POSSIBLE CAUSE AND REMEDY
SHWNKAGE, . Relaxation shrinkage
can occur in knit fabrics that have
kn
improperly stretched
KNITS and elongatd by the manufacturer. When this occurs, garment maybe pressed back into
shape after each wash and dry cycle.
●
Progressive
or delayed shrinkage is
caused when starch or sizing (in some fabrics) is
gradually removed by laundering. Maybe noticed in older garments that have been
laundered many times
witiout
previous shrinkage.
Tmt
as
br
Relaxation Shrinkage above.
●
Shrinkage caused by overheating
occurs in certain knit fibrics that have been
heat-
shaped. When washing, drying or ironing temperatures exceed the temperatures used to
shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by
washing in cold or warm water; drying on low heat.
WMNKLINGIN
●
Leaving clothes in dryer after tumbling stops. Remove clothes
prompdy
and hang
PERMANENT PRESS
them immediately.
AND “NO-IRON”
ITEMS
. Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
●
Too few items in dryer. If drying only one article, add two or more similar articles, even
if dry, to insure proper tumbling.
. Improper loads, Avoid laundering heavy Permanent Press items, such as work clothes,
with lighter Permanent Press items, such as shirts or blouses. Do not wash or dry
Permanent Press with regular laundry.
●
Too many clothes in washer. Items must have room to move freely. Permanent Press
loads should always be smdlerthan regular loads..
.no
more than medium loads.
c
Use of incorrect wash and dry cycles. Use Permanent Press Wash Cycle which provides
a cool-down rinse to minimize
wrin~ing.
Also, use Permanent Press Dry Cycle.
●
Incorrect
water
level.
Use
large
~ter
level
fir
medium
load;
medium level or half full
for small load.
●
Washing
repeatiy
in too hot water.
Wmh
in cool or warm
water with plenty of detergent.
11
The
fioblem
Solver
(continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WRINKLING IN
●
Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT PRESS
non-phosphate detergent, avoid the use of a high-carbonate detergent.
AND “NO-IRON”
ITEMS (continued) . Failure to use fabric softener. Proper use of fabric softener will minimize
wrirdding.
~
remove wrinkles:
●
Retumble
on “Permanent Press” setting.
●
Rerinse
and dry on “Permanent Press” setting.
. If unsuccessful,
retumble
on high heat for 10-12 minutes and hang immediately.
●
Iron carefully.
●
Send to dry cleaners for pressing.
●
Some wrinties may remain which cannot be removed?
*N~E:
If you follow good laundry procedures and Permanent Press clothes
still
come
out
wrirdded,
the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE
hswer
Center”
8W.6262~
consumer information service
12
Care and Cleaning
USER MAINTENANCE
INSTRUCTIONS
tied dryer care
The Drum.
Porcelain enamel
drum is
rust-resismnt
and requires
no special care.
The Exterior.
Wipe off any spills or
washing compounds. Wipe or dust
with damp cloth. Try not to strike
the surface with sharp objects.
The Lint Filter.
Wipe lint filter
before every use as described on
page 9. Periodically
lint
filter
should be removed and suction
hose from vacuum cleaner should
be inserted into the opening.
See below.
Do not obstruct the flow of
combustion and ventilating air.
Dryer Exhaust:
Inspect and clean
the dryer exhaust ducting at least
once a year.
To store dryer:
For short period of
time, disconnect power supply and
clean lint filter.
Do not store dryer where it will be
exposed to the weather.
CAUTIONS:
●
Before having your electric dryer
connected in your new residence,
be sure your licensed electrician
confirms that the supply
volt:ige
matches the voltage specified on
the rating plate.
● Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain
remover products if such products
are sprayed on or have direct
contact with the dryer.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products is
not covered by your warranty.
13
14
Wdll
Be There
With
tie
purchase of your new GE appliance, receive the
assurance that if you ever need information or
assis~nce
from GE, we’ll be
tiere.
Ml
you have to do is cdl—toll-free!
GEAnswer
Center
a
in-HomeRepak
Service
8ofl-GE-cAREs
AGE
Consumer Service professional
wtil
provide expert repair service,
scheduled at a time that’s convenient
for you. Many GE Consumer Service
company-operated locations offer you
service today or tomorrow, or at your
convenience
(7:00
a.m. to
7:00
p.m.
weekda~
9:00
a.m. to
2:00
p.m. Satur-
days).
Our factory-trained technicians
know your appliance inside and out—
so most repairs can be
handed
in just
one visit.
Service Contracts
800-626-~4
You can have the secure feeling that
GE Consumer Service will still be
there after your warranty expires. Pur-
chase a GE contract while your war-
ranty is still in effect and you’ll receive
a substantial discount. With a
multiple-
year contract, you’re assured of future
service at today’s prices.
Pafls
andAccessories
88fl-626-2002
hdividu&
qutiled
to service their
own
apphances
can
have needed
parts or accessories sent direcdy to
their home, free of shipping charge!
The GE parts system provides access
to over
47,000
parts.. and
d]
GE
Genuine Renewal Parts are
filly
warranted.
WSA,
MasterCard and
Discover cards are accepted.
User maintenance instructions
contained in this boo~et cover
proce-
dws
intended to be performed by
any user. Other servicing
genedy
shodd be referred to
qutiled
ser-
vice personnel. Caution must be
exercised, since improper servicing
may
muse
unsafe operation.
Whatever your question about any GE
major appliance,
GE
Answer Cente@
information service is available to
help. Your cdl—and your question—
will
be answered prompdy and
courteously And you can
cdl
any
time.
Gkl
Answer Cente@ service is
open
24
bours a
day
7 days a week.
Telecommunication Detice for the
Ded
I
For Customers
Wtih
Special Needs...
80~62&2000
Upon request, GE will provide Braille
controls for a variety of GE appliances,
and a brochure to assist in planning a
barrier-free kitchen for persons with
limited
mobility To
ob~in
these items
free
of
cbarge,
cdl
800.626.2000.
Consumers with impaired hearing
or
speech who have access to a
TDD
or
a
conventional teletypewriter may
Cd]
800-TDD-GEAC
(800-833-4322)
to request information or service.
YOUR GE AUTOMATIC CLOTHES DRYER
WARRANTY
Save
proof of original purchase date such as your sales slip or cancelled check to establish warranty period.
WHAT IS COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
any part of
the
dryer
that fails
because of a manufacturing
defect.
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
and Washington,
D.C.
In Alaska the
warranty is the same except that it
is LIMITED because you must pay to
ship the product to the service shop
or for the service technician’s travel
costs to your home.
All warranty service will be provided
by our Factory Service Centers or
by our authorized Customer
Care@
servicers during normal working
hours.
Look
in the White or Yellow Pages
of your telephone directory for
GENERAL ELECTRIC COMPANY,
GENERAL ELECTRIC FACTORY
SERVICE, GENERAL
ELECTRIC-
HOTPOINT
FACTORY SERVICE or
GENERAL ELECTRIC CUSTOMER
CARE@ SERVICE.
WHAT IS
N~
COVERED ●
servicetriPstoyourhometo
teach you how to use the product.
Read
your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer Center”
800.626.2000
consumer information service
● improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, exhausting
and other connecting facilities.
. Replacement of house fuses or
resetting of circuit breakers.
● Failure of the product if it is used
for other than its intended purpose
or used commercially.
. Damage to product caused
by accident, fire, floods or acts
of God.
WARRANTOR IS
NOT
RESPONSIBLE
FOR CONSEQUENTIAL DAMAGES.
Some
states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
Pati
No. 113
D5497P171
DDE7206M
DDE7208M
Pub. No. 49-9665
DDG7286M
DDG7288M
&W
CG
This manual suits for next models
3
Table of contents
Other GE Dryer manuals
