Created 6/98
JMP31WAWW—GE Profile™27" Drop-In Electric Range
Dimensions (in inches) Countertop Cutout Top View
Note: All 27" Drop-In Electric Ranges conform to U.L. requirements for min-
imum spacing between range and side walls above countertop.
Cabinets installed adjacent to slide-in ranges must have an adhesion spec
of at least 194°
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
KW Rating
240V 9.8
208V 7.3
Important: This range is designed to hang from the
countertop. It does not rest on the floor.
Countertop
If necessary, build up
sides to 1-1⁄2" thick to
provide screw anchor
surface and
countertop support
Locate junction box
anywhere in shaded area
Door
clearance
30" MIN. to
bottom of
cabinet
over
range
18
Range side
support
Back of range
to front of
closed door
Trim section for
countertop with
post formed or
raised front
edge
227-1/8
24-3/16
22-3/16
28-7/16
28-1/2"
MIN.
27" Between
cabinets
20"
22-3/16"
13/32
Inside back wall of cabinet
or rear wall
Adjoining
vertical
cabinet
or wall
above
countertop
3" MIN.
(Both sides)
26-1/4" MAX.
Smooth cut
22-7/8"
Cutout
3/8" MIN. Flat
1-1/2" MIN.
Clearance
*If countertop edge is formed, this
dimension must extend to flat area
In replacement installation, use
JX27R optional backguard, if required
21-3/4" cabinet
face to rear
of cutout
23-3/8" MIN.*
Flat counter
Optional Backguard
(Available at additional cost)
JX27RBK = Black
JX27RWH = White
JX27RAD = Almond
For answers to your Monogram,®
GE Profile Performance Series,™
GE Profile™or GE appliance questions, call
GE Answer Center®service, 800.626.2000.
Listed by
Underwriters
Laboratories
