Gearhead LM7000W User manual

LaserWirelessMouse
Model: LM7000W
User’sManual
110938-109103
Rev.061101

2
User’sRecord:
Toprovide qualitycustomer serviceandtechnicalsupport, itissuggested thatyoukeepthe
followinginformationaswell as your storereceiptandthis user’smanual.
DateofPurchase:
__________________________________
ModelNumber:
__________________________________
SerialNumber:
__________________________________
ProductRevNumber(locatedbelowtheUPConthepackage):
__________________________________

3
PackageContents:
YournewMousewill ship withthefollowingitems.
§LaserWireless Mouse
§USBReceiver
§DriverSoftwareonCD
§2AA Batteries
§User’sManual
§Warranty Information
SystemRequirements:
Pleasebesure thatyoumeetall ofthesystemrequirementsbelowtoavoiddifficultiesduringinstallation.
§IBMPCsor100%Compatibles
§Windows®ME, 2000, XP
§Available USBPort
§CD-ROMDrive
SystemSpecifications:
YournewMousecomplieswiththefollowingspecifications.
§1600dpi
§USBInterface

4
HardwareInstallation:
NOTE: The picturesshown in theUser’sManualarefordemonstrationpurposesonly.Yourcomputerorproductmay lookslightly different.
1. ConnectTheWireless USB ReceiverToYourComputer:
a. Turnonyourcomputerandwaitforitto load.
b. Connectthe Wireless USB Receiver into anavailable USBportonyourcomputer.
c. YourcomputerwilldetectyourUSBdeviceandthe necessary driverswill be installedautomatically.
2. BatteryInstallation:
a. Removethe BatteryCompartmentCover fromthe bottom ofyourMouse.
b. Install twoAA Batteriesinto the BatteryCompartment followingthe battery orientationguideprintedinsidethe compartment.
c. Replacethe BatteryCompartmentCover backonto yourMouseuntil itsecurely locks.

5
3. EstablishaConnection:
a. Press the ConnectButton atthe bottomofthe Wireless USBReceiver.Yourmousewill establishaconnectionwiththereceiver
andisready to be used.If aconnectionisnotestablished,theremightbe ahighlevel ofsurroundinginterference, press the
ConnectButton onthe bottomofyourMouse.The LEDIndicatorabovethe PowerSwitch willturnonto indicateitisscanning
foraconnection. The LEDIndicatorwill turnoff afteraconnectionhasbeen established.
b. The LEDConnectionIndicator onthe Wireless USB Receiver indicatesthe statusoftheconnectionbetween yourMouse
andyourcomputer:
Status Description
LEDOff NoPower/NotConnectedToComputer
SolidRed Connected/NoActivityDetected
Blinking Red ScanningForConnection
Flashing Red YourMouseIsInActiveMode

6
SoftwareInstallation:
YourMousecomeswithWheel Mousesoftwarewhichallowsyoutoassignspecialfunctionstothe3programmable buttonsonyourMouse.
Toinstall the Wheel Mousesoftware,pleasefollowthe instructionsbelow:
1. If youhaveinstalledany othermousedrivers/softwareonto yourcomputer,pleaseuninstall them prior to the installationofthe Wheel
Mousesoftwareto avoidany softwareconflicts.
2. Placethe DriverCD into theCD-ROMdriveofyourcomputer.
3. The Wheel Mousesetup screen will startautomatically.Tostartthe setup manually,click“Start”,then “Run…”,type
“D:\SETUP.EXE”into the dialogbox(NOTE: “D:\” representsthe driveletterassignedto the CD-ROMdriveyouareusing.If Dis
not the letterassignedto yourCD-ROMdrive, replace Dwiththe appropriatedriveletter.),then click“OK”.
4. Followthe onscreen instructionto completethe installation. Afterthe installationiscompleterestartyourcomputer.
WheelMouseConfiguration:
ToconfigureyourMouseusingthe Wheel Mousesoftware, pleasefollowthe instructionbelow:
1. Make sureyourMouseisconnectedtoyourcomputer.
2. Toopen the Wheel MouseSetting screen, rightclickthe Wheel Mouseicon onthe systemtray ofyourdesktop, andthen select
“Setting”.

7
3. Toconfigurethe Scroll Wheel onyourMouse, clickthe “Wheel”tab.
Options Descriptions
Wheel Mode System Default(Intelli-Mouse)Mode:
Selectthismodetoapply only theWindows®defaultscroll wheel options.
EnhancedScroll Mode:
Selectthismodetoapply the Wheel Mousesettingsto yourWireless Presenter.
Wheel Speed Scroll #linesperscroll unit:
Selectthisoption, andthen specify the numberoflinesto scrolleachtimeyouscroll the scroll wheelon
yourMouse.
Scroll onepageperscrollunit:
Selectthisoptionto scroll throughone pageeachtimeyouscroll the scrollwheel onyourMouse.
4. Afteryoumake all yourselections,click“Apply”to savethe changes.Toclosethe screen, click“OK”.

8
5. Toconfigurethe programmable buttonsonyourMouse, clickthe “ProgrammableButton”tab.
Options Descriptions
ButtonSelections Clickthe drop-down menu forthe buttonyouwishto programandthen selectwhichofthe pre-
programmedfunctionstoassignto thatbutton.
FunctionDescription Thisboxshowsthe descriptionofthe functionyouselected.
NOTE:Forthe function“ConnectToInternet”,pleasemake sureto include“http://”beforethe
addresswhen youenterthe web address youwantedto connectto.
6. Afteryouhavemadeall ofyourselections,click“Apply”to savethe changes.Toclosethe screen, click“OK”.

9

10
FCC Information:
FCC
Thisequipmenthasbeen testedandfoundtocomply withlimitsforClass Bdigitaldevicepursuantto Part15 ofFederalCommunications
Commission(FCC)rules.
FCC ComplianceStatement
Theselimitsaredesignedto providereasonable protectionagainstfrequency interferencein residentialinstallation. Thisequipmentgenerates,
uses,andcanradiateradiofrequency energy,andifnot installedorusedin accordancewiththe instructions,may causeharmful interferenceto
radiocommunication. However,thereisnoguarantee thatinterferencewill notoccurin televisionreception, whichcanbe determinedby
turningthe equipmentoffandon. The userisencouragedto try andcorrecttheinterferencebyoneormoreofthe followingmeasures:
§Reorientorrelocatethe receivingantenna
§Increasethe separationbetween the equipmentandthe receiver
§Connectthe equipmentinto anoutletonacircuitdifferentfrom thatto whichthe receiverisconnectedto.
CAUTION!
The FederalCommunicationsCommissionwarnsthe userthatchangesormodificationstothe unitnot expressly approvedbythe party
responsible forcompliancecouldvoidtheuser’sauthorityto operatethe equipment.