Gefen GTB-HD4K2K-142-BLK User manual

Audio
Embedder
3GSDI
Release A2
User Manual
GTB-HD4K2K-142-BLK
12
SOURCE DISPLAYS
:Splitter for
HDMI with Ultra HD
4K x 2K support

1:2 Splitter for HDMI 4K x 2K
Important Safety Instructions
ii
GENERAL SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or
touch this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Batteries that may be included with this product and/or accessories should never be
exposed to open ame or excessive heat. Always dispose of used batteries
according to the instructions.

1:2 Splitter for HDMI 4K x 2K
Warranty Information
Gefen warrants the equipment it manufactures to be free from defects in material and
workmanship.
If equipment fails because of such defects and Gefen is notied within two (2) years from
the date of shipment, Gefen will, at its option, repair or replace the equipment, provided
that the equipment has not been subjected to mechanical, electrical, or other abuse or
modications. Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such repairs
are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or tness for any particular purpose, all of
which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their original
condition.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the features and specications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Support section of the Gefen Web site at www.gefen.com.
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page under the
Support section of the Gefen Web site.
iii

iv
1:2 Splitter for HDMI 4K x 2K
Gefen, LLC
c/o Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
Telephone: [phone]
[phone]
Fax: [phone]
Email: [email protected]
Visit us on the Web: www.gefen.com
Technical Support Hours: 8:00 AM to 5:00 PM Monday - Friday, Pacic Time
For 24 / 7 support, see the back of the product for the
support number
1:2 Splitter for HDMI 4K x 2K is a trademark of Gefen, LLC.
Important Notice
Gefen, LLC reserves the right to make changes in the hardware, packaging, and any
accompanying documentation without prior written notice.
HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing in the United States and other countries.
© 2013 Gefen, LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Contacting Gefen Technical Support
iv

vv
3GSDI Audio Embedder
• The 1:2 Splitter for HDMI 4K x 2K has advanced EDID management features to
ensure complete compatibility with all sources and display devices.
See Setting the EDID Mode for more information.
• The 1:2 Splitter for HDMI 4K x 2K automatically detects the presence of Deep Color.
This feature will be disabled if any of the connected sink devices (displays, etc.) do not
support this feature. This behavior ensures compatibility among all output devices in a
mixed-device environment. This feature cannot be disabled.
Operating Notes
1:2 Splitter for HDMI 4K x 2K

vi
Features
• Simultaneously displays any Ultra Hi-Def source on up to two Ultra HD displays
• Supports HD resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30Hz)
and 1080p Full HD
• Supports 12-bit Deep Color
• 3DTV pass-through
• Lip Sync pass-through
• FST Technology speeds up HDCP authentication process
• Fast and Slow FST Modes
• Advanced EDID Management for rapid integration of source and displays
• Supports LPCM 7.1, Dolby® TrueHD, Dolby Digital® Plus,
and DTS-HD Master Audio™
• Supports the use of DVI sources and DVI displays with HDMI-to-DVI adapters
(not included)
• Field-upgradeable rmware using Mini-USB port
• Locking Power Supply
• Surface-mountable
Packing List
The 1:2 Splitter for HDMI 4K x 2K ships with the items listed below. If any of these items are
not present in your box when you rst open it, immediately contact your dealer or Gefen.
• 1 x 1:2 Splitter for HDMI 4K x 2K
• 1 x 6 ft. HDMI cable (M-M)
• 1 x 5V DC locking power supply
• 1 x Quick-Start Guide
1:2 Splitter for HDMI 4K x 2K
Features and Packing List
1080P
®
F
AST
S
WITCHING
T
ECHNOLOGY

3GSDI Audio Embedder1:2 Splitter for HDMI 4K x 2K
Table of Contents
viii
01 Getting Started
Panel Layout ......................................................................................................... 2
Installation ............................................................................................................. 4
Connecting the 1:2 Splitter for HDMI 4K x 2K............................................... 4
Sample Wiring Diagram ................................................................................ 4
02 Operating the
1:2 Splitter for HDMI 4K x 2K
Setting the Switching Mode................................................................................... 8
What is Fast Switching Technology? ............................................................ 8
Using Fast Mode ........................................................................................... 8
Using Slow Mode .......................................................................................... 9
Setting the Audio Channel Mode......................................................................... 10
Using 2-Channel Audio ............................................................................... 10
Using Multichannel Audio............................................................................ 11
Setting the EDID Mode........................................................................................ 12
Using the Internal EDID .............................................................................. 12
Using the External EDID ............................................................................. 13
03 Appendix
Wall Mounting Instructions .................................................................................. 16
Firmware Upgrade Procedure............................................................................. 17
Specications ...................................................................................................... 18

12
SOURCE DISPLAYS
:Splitter for
HDMI with Ultra HD
4K x 2K support
01 Getting Started
Panel Layout ......................................................................................................... 2
Installation ............................................................................................................. 4
Connecting the 1:2 Splitter for HDMI 4K x 2K............................................... 4
Sample Wiring Diagram ................................................................................ 4

page | 2
Getting Started
Panel Layout
1
2
3
4
6
1
5
7 8

page | 3
Getting Started
Panel Layout
ID Name Description
1 Out 1 / Out 2 Connect an Ultra HD display to each of
these ports using HDMI cables.
2FST (Fast / Slow) Use this slider switcher to switch between
Fast and Slow FST (Fast Switching
Technology) modes. See Setting the
Switching Mode for more information on
using FST mode.
3Audio (2ch / Multi-ch) Use this slider switcher to switch between
2CH and Multichannel audio on the output.
See Setting the Audio Channel Mode for
more information on using this feature.
4EDID (Int / Ext) Use this slider switch to switch between
internal (Int) and external (Ext) EDID
modes. See Setting the EDID Mode for
more information.
5 Power This LED indicator will glow bright blue
when the included 5V DC power supply
is connected between the splitter and an
available electrical outlet.
6 In Connect the included HDMI cable from the
Ultra Hi-Def source to this HDMI port.
7USB Used for upgrading the rmware.
See Firmware Upgrade Procedure for more
information.
8 5V DC Connect the included 5V DC power supply to
this locking power receptacle.

Page Title
page | 4
Getting Started
Installation
Connecting the 1:2 Splitter for HDMI 4K x 2K
1. Use the included HDMI cable to connect the Ultra Hi-Def source to the In port on the
splitter.
2. Connect up to two Ultra Hi-Def displays to the Out 1 and Out 2 ports on the splitter.
3. Connect the included 5V DC locking power supply to the power receptacle on the
splitter. Do not overtighten the locking power connector.
4. Connect the included AC power cord from the power supply to an available electrical
outlet.
Sample Wiring Diagram
GTB-HD4K2K-142-BLK
Ultra HD
Splitter for HDMI
HDMI CABLE
Ultra HD
Source
Ultra HD
Display
Ultra HD
Display

12
SOURCE DISPLAYS
:Splitter for
HDMI with Ultra HD
4K x 2K support
02 Operating the
1:2 Splitter for HDMI 4K x 2K
Setting the Switching Mode................................................................................... 8
What is Fast Switching Technology? ............................................................ 8
Using Fast Mode ........................................................................................... 8
Using Slow Mode .......................................................................................... 9
Setting the Audio Channel Mode......................................................................... 10
Using 2-Channel Audio ............................................................................... 10
Using Multichannel Audio............................................................................ 11
Setting the EDID Mode........................................................................................ 12
Using the Internal EDID .............................................................................. 12
Using the External EDID ............................................................................. 13

page | 8
What is Fast Switching Technology?
Fast Switching Technology (FST) is a Gefen software implementation for HDMI products.
FST was created to improve the lengthy HDMI authentication process, based on the HDMI
and HDCP specications.
FST provides quicker audio/video source switching and greatly improves the overall audio/
video system behavior and performance when more than one HDTV display is used in the
system setup.
FST allows connecting / disconnecting or turning ON / OFF of HDTV displays without
having these activities affect other Hi-Def sources routed to any other HDTV display in the
same system.
Using Fast Mode
Use fast switching mode to improve performance when connecting / disconnecting Hi-Def
sources, and powering ON / OFF HDTV displays.
1. Disconnect the power supply from the 1:2 Splitter for HDMI 4K x 2K.
2. Set the FST switch to the Fast position.
3. Reconnect the power supply to the splitter.
If the FST switch is moved from the Slow position to the Fast position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
FAST SWITCHING TECHNOLOGY
Operating the 1:2 Splitter for HDMI 4K x 2K
Setting the Switching Mode
Set to the
Fast position

page | 9
Using Slow Mode
When set to slow switching mode, the 1:2 Splitter for HDMI 4K x 2K will follow the standard
authentication process, based on the HDMI and HDCP specications. Slow mode is
recommended when the source does not support multiple devices.
1. Disconnect the power supply from the splitter.
2. Set the FST switch to the Slow position.
3. Reconnect the power supply to the splitter.
If the FST switch is moved from the Fast position to the Slow position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
Operating the 1:2 Splitter for HDMI 4K x 2K
Set to the
Slow position
Setting the Switching Mode

page | 10
Operating the 1:2 Splitter for HDMI 4K x 2K
The 1:2 Splitter for HDMI 4K x 2K features a switch that will switch between 2-channel and
multichannel audio output.
Using 2-Channel Audio
Use this audio mode when all displays (and/or other sink devices) support only 2-channel
LPCM audio.
1. Disconnect the power supply from the splitter.
2. Set the EDID switch to the Int position.
3. Set the Audio switch to the 2ch position.
4. Reconnect the power supply to the splitter
If the Audio switch is moved from the Multi-ch position to the 2ch position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.
5. The internal EDID will restrict the audio output to the following format(s), regardless of
the audio input format:
Audio Format Speaker Allocation
LPCM 2CH FL / FR
Setting the Audio Channel Mode
NOTE: In order for the audio channel mode to be selected, the
EDID switch must be set to the Int position. If the EDID switch is
set to the Ext position, then the Audio switch will have no effect
on the audio output signal. See Setting the EDID Mode for more
information on using the EDID.
Set to the 2ch
position