GEKKO EnOcean User manual

EnOcean
Technical Manual
EnOcean
Technical Manual

2
Table of contents
1 Safety and warranty.........................................................................4
2 General Information about myGEKKO & EnOcean.........................6
2.1 The Setup........................................................................................6
3 myGEKKO EnOcean products......................................................... 7
3.1 myGEKKO EnOcean sub-surface actuator with one switching out-
put 2.3kW........................................................................................8
3.2 myGEKKO EnOcean sub-surface actuator with two switching out-
puts 1.15 kW.................................................................................. 9
3.3 myGEKKO EnOcean sub-surface actuator for roller blind mo-
tor.................................................................................................. 10
3.4 myGEKKO EnOcean valve actuator, battery-free........................11
3.5 myGEKKO Enocean Soft Button 4F, battery-free....................... 13
3.6 myGEKKO EnOcean Wall Switch White...................................... 14
3.7 myGEKKO EnOcean Wall Motion Detector.................................15
3.8 myGEKKO EnOcean Window Contact.........................................16
3.9 myGEKKO EnOcean Indoor Temperature Sensor 0 - 40 °..........17
3.10 myGEKKO EnOcean Temperature and Humidity Sensor...........18
3.11 myGEKKO Enocean Schuko Smart Plug, metering.................... 19
4 Configuration of myGEKKO Products...........................................21
4.1 General Configuration..................................................................21
4.2 EnOcean Actuators...................................................................... 26
4.2.1 EnOcean 1-channel actuator wiring diagram............ 28
4.2.2 EnOcean 2-channel Actuators Wiring Diagram........31
4.2.3 EnOcean roller shutter actuator wiring diagrams..... 33
4.3 EnOcean Smart Plug....................................................................34
4.4 EnOcean Valve Actuator..............................................................35
4.5 EnOcean Temperature and Humidity Sensors...........................36
4.6 EnOcean Window Contact...........................................................39
4.6.1 Logics for Window Contacts......................................40
4.7 EnOcean Movement Sensor........................................................46
4.8 EnOcean Wireless Pushbutton....................................................48
4.9 Set EnOcean Repeater.................................................................50
5 Configuration of Third-party Products..........................................53
5.1 Configuration of EnOcean........................................................... 53
5.2 Teaching in EnOcean Sensors.................................................... 54
5.3 Sensor Configuration................................................................... 56
5.4 Teaching-in of EnOcean Actuators............................................. 57
5.5 Configuring EnOcean Actuators..................................................59
6 Noteworthy..................................................................................... 60
6.1 Error messages............................................................................ 60

3
6.2 Tips................................................................................................60
6.3 Proprietary EEP Data Types (in the USER EPP profile)..............60
6.4 Supported Standard EEP Data Types......................................... 61

4
1 Safety and warranty
The devices are manufactured in a safe and workmanlike manner in compli-
ance with current regulations and are operationally reliable. They have been
tested and have left the factory in perfect condition.
However, there are residual risks. Read and comply with safety instructions to
avoid risks.
Ekon GmbH assumes no liability for damages caused by non compliance with
the safety instructions.
Safety information
and symbols used
The following pictographs and signal words indicate particular dangers in the
handling of the devices and provide important information:
Hints in these boxes are general advices on the text that will be highlighted.
NOTE
The signal word "Note" indicates useful tips and recommendations for han-
dling the product efficiently.
CAUTION
Health damage / Property damage
The respective warning symbol used in conjunction with the signal word
"Caution" indicates a danger which may lead to slight (reversible) injury or
material damage.
WARNING
Serious damage to health
The respective warning symbol used in conjunction with the signal word
"Warning" indicates an imminently threatening danger which may result in
death or serious (irreversible) injury.
DANGER
Danger to life/Serious damage to health
The respective warning symbol in conjunction with the signal word "Danger"
indicates an imminently threatening danger which leads to death or serious
(irreversible) injury.
Safety instructions Safety instructions about the product described in this document are listed
below. Please observe them carefully while using the product.

5
DANGER
Electric Voltage!
Danger to life and fire hazard from electrical voltage
Inside the device are unprotected live component parts. Observe the VDE
regulations. Disconnect all cables to be installed and take safety precau-
tions against unintentional switching on. Do not operate the device if dam-
aged or not functioning properly. Decommission the device or system and
secure it against accidental operation, if any operation without risk may sup-
posedly not be guaranteed.
CAUTION
Device damage from external influences!
Moisture and dirt on the equipment can lead to its destruction.
Protect devices from moisture, dirt and damage during transport, storage
and operation.
Warranty The device is intended solely for proper use. Any inappropriate change or non
compliance with the operating instructions invalidates any warranty or guaran-
tee. After unpacking, check the device immediately for any mechanical dam-
age. In case of damage caused during transportation please immediately in-
form the supplier. The device must only be operated as a fixed installation, i.e.
only when installed and after all of the installation and commissioning work
has been completed, and exclusively in the environment it is intended for. Ekon
GmbH shall not be liable for any modifications to standards and norms after
publication of the operating instructions.

6
2 General Information about myGEKKO & EnOcean
Purpose The myGEKKO EnOcean USB300 makes it very easy to integrate EnOcean com-
patible devices into the myGEKKO system. Sensors such as pushbuttons or
temperature sensors can be integrated, as well as actuators including dim-
mers or blind actuators, and can for example also be connected to other sys-
tems.
USP In buildings that would otherwise require a great deal of installation work to
implement solutions, all sensors can be implemented wirelessly. The EnOcean
wireless standard is a battery-free technology. You can integrate sensors such
as pushbuttons or temperature sensors and include actuators such as dim-
mers.
Implementation in
5 Steps
1. Install actuators
2. Install sensors
3. Connect and configure the EnOcean devices in the respective system
4. Configure the corresponding functions/actions
5. Connect repeaters if necessary
2.1 The Setup
The myGEKKO building controller is paired with EnOcean using an EnOcean
USB300 stick. The EnOcean USB300 can be connected either directly to a USB
interface on a myGEKKO building controller or a myGEKKO NODE. With one
myGEKKO building controller, up to 128 actuators and 128 sensors, a total of
up to 256 devices, can be coupled.

7
3 myGEKKO EnOcean products
3.1
The USB EnOcean interface is used
to exchange information between the
myGEKKO building controllers and the
batteryless EnOcean wireless devices.
This interface is connected via the USB
port and is ready to include devices in the
myGEKKO ecosystem.
GEK.GAT.ENO.USB1

8
3.1 myGEKKO EnOcean sub-surface actuator with one switching output
2.3kW
This EnOcean® Relay Switch is compati-
ble with the worldwide EnOcean® proto-
col for smart homes with myGEKKO and
can be mounted on the ceiling, in the
wall or behind the socket. This turns any
mute device into a smart device. With
a switching capacity of 2300 W and a
potential-free output, you can make your
home smarter without replacing a single
device. The profile is fully integrated into
the myGEKKO OS and ready to be used
without programming to control various
systems such as lighting, heating, sock-
ets, audio and more.
GEK.ENO.WAC.0123
Parameters Value
Housing Plastic
Color Green
Mounting Sub-surface
Dimensions 16.9x44x40 mm
Weight 34 g
Operating temperature +5°C to +40°C
Power supply 230 V AC ~ 50Hz
Switching capacity 230V AC - 10A // 30V DC -
10A
Own consumption <1W
Output power max. 2.3 kW (resistive load)
EEP (EnOcean profile) D2-01-0F
Frequency range 868.0 to868.6 MHz
RF performanceMax. +3 dBm
Range 20 to 30 m indoors
Protection degree IP2X
Maximum pairable devices 24

9
Parameters Value
Certifications EN 60669-1: 1999 + A1: 02 +
A2: 08
EN 60669-2-1: 2004 + A1: 09
+ A12: 10
EN 300220-2 V3.1.1
EN 301489-01 V2.1.1
EN 301489-03 V2 .1.1
EN 62479: 2010
3.2 myGEKKO EnOcean sub-surface actuator with two switching outputs
1.15 kW
This EnOcean® Relay Switch is compati-
ble with the worldwide EnOcean® proto-
col for smart homes with myGEKKO and
can be mounted on the ceiling, in the
wall or behind the socket. This turns any
dumb device into a smart device. With
a switching capacity of 2300 W and a
potential-free output, you can make your
home smarter without replacing a single
device. The profile is fully integrated into
myGEKKO and ready to be used without
programming to control various systems
such as lighting, heating, sockets, audio
and more.
GEK.ENO.WAC.0124
Parameters Value
Housing Plastic
Color Green
Mounting Sub-surface
Dimensions 16.9x44x40 mm
Weight 34 g
Operating temperature 0°C to +40°C
Power supply 230 V AC ~ 50Hz
Switching capacity 230V AC - 2 x 5A
Own consumption <1W
Output power max. 2 x 1150W (resistive load)
short-term
2 x 1050W (resistive load)
continuous load
EEP (EnOcean profile) D2-01-12
Frequency range 868.0 to868.6 MHz

10
Parameters Value
RF performanceMax. +3 dBm
Maximum pairable devices 24
Range 20 to 30 m indoors
Protection degree IP2X
Certifications EN 60669-1: 1999 + A1: 02 +
A2: 08
EN 60669-2-1: 2004 + A1: 09
+ A12: 10
EN 300220-2 V3.1.1
EN 301489-01 V2.1.1
EN 301489-03 V2 .1.1
EN 62479: 2010
NOTE
A list of compatible loads can be found at: https://link.my-
gekko.com/nodon-loads-lights
3.3 myGEKKO EnOcean sub-surface actuator for roller blind motor
This EnOcean® Relay Switch is compati-
ble with the worldwide EnOcean® proto-
col for smart homes with myGEKKO and
can be mounted on the ceiling, in the wall
or behind the socket. This turns any dumb
device into a smart device. With a maxi-
mum motor output of 280 W and 60 Nm,
you can make your home smarter with-
out changing a single device. The profile
is fully integrated in the myGEKKO OS and
ready to be used without any program-
ming effort. Can be used in various sys-
tems such as light, heating, sockets, audio
and much more.
GEK.ENO.WAC.0203
Parameters Value
Housing Plastic
Color Green
Mounting Sub-surface
Dimensions 16.9x40x44 mm
Weight 34 g
Operating temperature -10°C to +40°C
Power supply 230 V AC ~ 50Hz

11
Parameters Value
Switching capacity 230V AC - 3A
Own consumption <1W
Motor power max. 280W Max - 60 Nm Max.
EEP (EnOcean profile) D2-05-00
Frequency range 868.0 to868.6 MHz
RF performance + 3dm
Maximum pairable devices 22
Range 20 to 30 m indoors
Protection degree IP30
Certifications EN 60669-1: 1999 + A1: 02 +
A2: 08
EN 60669-2-1: 2004 + A1: 09
+ A12: 10
EN 301489-01 V2.1.1
EN 301489-03 V2 .1.1
EN 300220-2 V3.1.1
EN 62479: 2010
2012/19/EC WEEE Directive
2006/95/EC
2014/35/EU
NOTE
A list of compatible loads can be found at: https://link.my-
gekko.com/nodon-loads-lights
3.4 myGEKKO EnOcean valve actuator, battery-free
This valve with EnOcean® technology re-
places the previous manual thermostat
head. Management becomes intelligent,
local management takes place directly at
the valve. The internal temperature sen-
sor enables precise control of the temper-
ature of the zone. The device does not
require batteries. The profile is fully inte-
grated into the myGEKKO OS and can be
used in the various systems such as heat-
ing without any programming effort. Valve
connection M30 x 1.5; adapters are re-
quired for other valve types.
GEK.ENO.WAC.0204

12
Parameters Value
Housing Plastic/Metal
Color White/Gray
Mounting Screw threads, M30 x 1,5 /
others through adaptation
Dimensions (diameter x D) 55x95 mm
Weight 260 g
Operating temperature 0°C to +40°C
Storage temperature –10°C to +45°C
Humidity Max. 70% relative humidity
Energy source Designed for year-round op-
eration, pre-charged. Imme-
diately ready for use if stored
for up to 12 months and at
a storage temperature of no
more than 40 ° C
Energy generation, Minimum
Requirement
90 standard heating days
with> 45 ° C flow temperature
EEP (EnOcean profile) A5-20-06
Frequency 868.3 MHz
Radio interval Normal opera-
tion
Standard: Automatic(2/5/10
min.)
Radio interval Commission-
ing
2 mins. (according to30 min.:
Normal operation)
Supply temperature 75°C Max.
Plunger travel > 5 mm
Department 2.0 mm typical
Increment 1%
Actuating time/actuating
speed
0.95 mm/s typical
Force of the plunger 100 N typical
Actuating noise < 30 dB (A)
Frost protection Valve opens 95% when the
environment is > 6 ° C
Normal operation in an envi-
ronment < 6 ° C
Frost protection only kicks in
at > 0C when nominal value =
0C
Local adjustment option +/- 5°C

13
Parameters Value
Temperature accuracy +/- 0.5° C
Certifications CE
EN 300220-1 V3.1.1
EN 300220-2 V3.1.1
3.5 myGEKKO Enocean Soft Button 4F, battery-free
Compatible with the international EnO-
cean® Smart Home / Smart Building pro-
tocol, this EnOcean® remote control is in-
tegrated in the myGEKKO OS and ready to
be connected. No battery is required for
operation, and it can be used to control
your home automation ecosystem via the
myGEKKO OS. The soft remote control is
magnetic, shockproof, splash-proof and is
the perfect companion for a smart home
with myGEKKO.
GEK.ENO.WIB.MB02
Parameters Value
Housing Plastic
Color White
Dimensions 56x56x20 mm
Operating temperature -10°C to+50 °C
Energy source Battery-free
EEP (EnOcean profile) F6-02-02
Frequency range 868.0 to868.6 MHz
Central radio frequency 868.3 MHz
Maximum wireless power +3 dBm
Range 20 to30 m Indoors
Resistance Waterproof
Protection degree IP67
Certifications EN 60950-1:2006+
A11:2009+A1:2010+
A12:2011+ A2:2013,
EN 301489-3 V1.6.1,
EN 61000-3-2:2013,,
EN 61000-3-3:2013, EN
300220-2:V3.1.1, EN
62479:2010

14
3.6 myGEKKO EnOcean Wall Switch White
Compatible with the international EnO-
cean Smart Home / Smart Building pro-
tocol, this EnOcean wall switch will revo-
lutionize the way you control your Smart
Home. It does not require a battery to op-
erate and can be used to control your EnO-
cean actuators or your entire myGEKKO
ecosystem. Whether you want to retro-
fit your home with no construction work,
combine it with a myGEKKO EnOcean sub-
surface module, or take control of your
smart home scenarios: This wall switch is
easier than ever and maintenance-free.
GEK.ENO.WIB.MB03
Parameters Value
Housing Plastic
Color White
Functions 1 or 2 pushbutton rockers
Mounting Surface
Dimensions 80x80x15 mm
Energy source Battery-free
EEP (EnOcean profile) F6-02-01
Frequency range 868.0 to868.6 MHz
Frequency 868.3 MHz
Range 20 to30 m indoors
Weight 53 g
Operating temperature -10°C to +50°C
Protection degree IP20
Certifications EN 60950-1: 2006 + A11:
2009
+A1:2010+A12:2011+A2:2013
EN 301489-3 V1.6.1
EN 61000-3-2:2013
EN 61000-3-3:2013
EN 300220-2 V3.1.1
EN 62479: 2010

15
3.7 myGEKKO EnOcean Wall Motion Detector
This EnOcean movement sensor is com-
patible with the EnOcean international
smart home and smart building protocol
and will automatically detect any move-
ment. Thanks to its wide range of mount-
ing options, you can mount it anywhere in
your house (on a table, wall or ceiling) and
adjust its settings to your ambient light in
order to fully enjoy its use. It's the perfect
device to save energy and keep your home
safe when you are not around!
GEK.ENO.WIB.MB04
Parameters Value
Housing Plastic
Color White
Mounting Surface, Interior
Dimensions 65x65x39 mm
Weight 54 g
Operating temperature –10°C to +45°C
Energy source Battery poweredCR123A 3V -
5 year battery life
EEP (EnOcean profile) A5-07-03
Frequency Depending on the region
Frequency range 868.0 to868.6 MHz
Range Max. 30 m
Brightness measured value
range
0 to1000 Lux
Motion measured value range Max. 5 m
Certifications EN 60950-1: 2006 + A11:
2009
+A1:2010+A12:2011+A2:2013
EN 301489-1 V2.2.0
EN 55022
EN 300220-2 V3.1.1
EN 62479: 2010

16
3.8 myGEKKO EnOcean Window Contact
The window contact does not require bat-
teries. Whether for securing, warning, re-
porting or monitoring: you always know
whether your door or window is open /
closed. This EnOcean® door and win-
dow sensor is compatible with the in-
ternational EnOcean® protocol for Smart
Home / Smart Building and reports to your
myGEKKO OS as soon as you or some-
one opens or closes a door / window. This
little sensor is simple and reliable. It is
the perfect companion to enhance your
comfort and safety while achieving signif-
icant energy savings in heating and cool-
ing. Shades can be raised automatically
when you open the window.
GEK.ENO.WOS.T001
Parameters Value
Housing Plastic
Color White
Mounting Wall mounting with tape (in-
cluded) or screws (not includ-
ed)
Dimensions 18x26x80 mm
Weight 29 g
Operating temperature −20 °C to +60 °C
Energy source Solar panel
Optional CR1216 battery (not includ-
ed) for use in dark areas (3
years in complete darkness)
EEP (EnOcean profile) D5-00-01
Frequency 868.3 MHz
Maximum area of detection
in closed position
5 mm max.
Range 20 to 30 m indoors
Protection degree IP20

17
Parameters Value
Certifications EN 60950-1: 2006 + A11:
2009
+A1:2010+A12:2011+A2:2013
EN 301489-3 V1.6.1
EN 61000-3-2:2013
EN 61000-3-3:2013
EN 300220-2 V3.1.1
EN 62479: 2010
3.9 myGEKKO EnOcean Indoor Temperature Sensor 0 - 40 °
Compatible with the international EnO-
cean Smart Home / Smart Building pro-
tocol, this EnOcean temperature sensor
checks the temperature of your room
every 100 seconds and returns it to your
myGEKKO OS or monitoring system as
soon as there is a 0.5  C temperature
change.
GEK.ENO.WOS.T002
Parameters Value
Housing Plastic
Color White
Mounting Wall mounting with tape (in-
cluded) or screws (not includ-
ed)
Dimensions 18x26x80 mm
Weight 23 g
Operating temperature -10°C to +50°C
Energy source Solar panel
Optional CR1216 battery (not includ-
ed) for use in dark areas (3
years in complete darkness)
Frequency EnOcean® - frequency 868.3
MHz
Range 20 to 30 m indoors
Connection EEP (EnOcean
profile)
A5-02-05
Temperature measured value
range
0°C to +40°C
Temperature resolution 0.5°C
Temperature accuracy ± 0.2 °C

18
Parameters Value
Protection degree IP20
Certifications EN 60950-1: 2006 + A11:
2009
+A1:2010+A12:2011+A2:2013
EN 301489-3 V1.6.1
EN 61000-3-2:2013
EN 61000-3-3:2013
EN 300220-2 V3.1.1
EN 62479: 2010
3.10 myGEKKO EnOcean Temperature and Humidity Sensor
Compatible with the international EnO-
cean Smart Home / Smart Building pro-
tocol, this EnOcean temperature and hu-
midity sensor checks the temperature and
humidity of your room every 100 seconds
and returns it to your myGEKKO OS or
monitoring system as soon as there is a
0.5 C temperature or +/-2% humidity vari-
ation.
GEK.ENO.WOS.T003
Parameters Value
Housing Plastic
Color White
Mounting Wall mounting with tape (in-
cluded) or screws (not includ-
ed)
Dimensions 18x26x80 mm
Weight 24 g
Operating temperature -10°C to +50°C
Energy source Solar panel
Optional CR1216 battery (not includ-
ed) for use in dark areas (3
years in complete darkness)
Frequency EnOcean® - frequency 868.3
MHz
Range 20 to 30 m indoors
Connection EEP (EnOcean
profile)
A5-04-01
Temperature measured value
range
0°C to +40°C

19
Parameters Value
Temperature resolution 0.5°C
Temperature accuracy ± 0.2 °C
Humidity measured value
range
0% to 100% relative humidity
Protection degree IP20
Certifications EN 60950-1: 2006 + A11:
2009
+A1:2010+A12:2011+A2:2013
EN 301489-3 V1.6.1
EN 61000-3-2:2013
EN 61000-3-3:2013
EN 300220-2 V3.1.1
EN 62479: 2010
3.11 myGEKKO Enocean Schuko Smart Plug, metering
Meet the World's Smallest EnOcean®
Smart Plug on the Market! The Smart
Plug is compatible with the global EnO-
cean® Smart Home/Smart Building pro-
tocol from myGEKKO and can turn any
connected device on or off. Thanks to its
small size, this smart plug is as discreet
as possible and seamlessly makes your
home smarter. In combination with your
myGEKKO, the Micro Smart Plug mea-
sures your energy consumption and helps
you to reduce your electricity costs. In con-
nection with the myGEKKO OS, the sock-
et can be integrated into a wide variety of
systems, such as devices / sockets.
GEK.ENO.WSP.S001
Parameters Value
Housing Plastic
Color White
Dimensions (diameter x D) 46x74 mm
Weight 67 g
Operating temperature +5°C to +40°C
Power supply 230 V AC ~ 50Hz
Switching capacity 1840 W (resistive load)
Own consumption <1W
EEP (EnOcean profile) D2-01-0E

20
Parameters Value
Frequency 868 MHz
Frequency range 868.0 to868.6 MHz
RF performance +3 dBm
Maximum pairable devices 24
Range 20 to 30 m indoors/up to 60
m outdoors
Protection degree IP20
Certifications EN 61058-1: 2002 + A2: 2008
NF C 61-314: 2008 + A1: 2010
(Typ E)
DIN VDE 0620-1: 2013
(Schuko)
DIN VDE 0620 -2-1: 2013
(Schuko)
EN 301489-1 V1.9.2
EN 301489-3 V1.6.1
EN 300220-2 V2.4.1