Genelec 04 User manual

Wall Mount
Floor Stand
Assembly
Manual
GENELECR

Wall mount: AssemblyWall mount: Assembly
Wall mount: AssemblyWall mount: Assembly
Wall mount: Assembly
• Fix the wall mount plate (1, see picture below) firmly
on a solid wall with the tube in a vertical position
• Using a mallet gently tap the U-bracket arm (4) into
the recess at the end of the right angled tube (2). The
U-bracket should only be mounted vertically with the
arms pointing either up or down. The bracket should
never be mounted horizontally. Secure the U-bracket
into position with a tube top screw (3).
• Push the right angled tube into the wall mount from
above and secure it with a stand screw and washer (5
and 6).
WARNING!WARNING!
WARNING!WARNING!
WARNING! Ensure that the wall structure is strong
enough to carry the wall mount and speaker securely
(speakers can weigh up to 32 kgs / 82 lbs). Never
mount the U-bracket so that its arms protrude horizon-
tally! The speaker’s weight could break the stand.
ASSEMBLASSEMBL
ASSEMBLASSEMBL
ASSEMBLY MANUALY MANUAL
Y MANUALY MANUAL
Y MANUAL
WALL MOUNT OPTION 04WALL MOUNT OPTION 04
WALL MOUNT OPTION 04WALL MOUNT OPTION 04
WALL MOUNT OPTION 04
FLOOR STFLOOR ST
FLOOR STFLOOR ST
FLOOR STAND OPTION 05AND OPTION 05
AND OPTION 05AND OPTION 05
AND OPTION 05
IntroductionIntroduction
IntroductionIntroduction
Introduction
Genelec wall mount and floor stand options are designed
to be used with Genelec 1030A, 1031A, 1032A, S30C/D
and 1037B monitor speakers. Due to the different speaker
sizes, it is important to state the speaker type and its
intended orientation (vertical or horizontal) when ordering
these accessories.

Floor stand: AssemblyFloor stand: Assembly
Floor stand: AssemblyFloor stand: Assembly
Floor stand: Assembly
• Place the floor stand foot (1, see picture on the left)
on the floor and attach the outer stand tube (2) to it.
Note the tapered end of the outer tube that fits into the
hole on the foot.
• Tap the U-bracket arm (5) to the recess at the top of
the inner tube (3). Secure the bracket with the tube top
screw (4).
• Fit the inner stand tube into the outer stand tube and
secure it to the correct height with a stand screw and
washer (6 and 7).
WARNING!WARNING!
WARNING!WARNING!
WARNING! Do not mount U-bracket so that its arms
point out horizontally! The speaker’s weight could break
the stand or cause it to fall over.
• Mount the metal bushes on the appropriate sides of
the speaker with the 4 mm screws provided. Ensure that
the bushes are exactly centred at the sides of the
speaker.
• Mount the speaker onto the stand using the stand
screws and washers. Due to the weight of the speaker,
it is advisable not to attempt to do this alone.
• Adjust the stand to the correct height and lock it with
the screw on the outer stand tube.
1030A vertical 121 - 149 (475/8- 581/4”)
1031A vertical 119 - 147 (467/8- 571/4”)
1031A horizontal 110 - 138 (431/4- 543/8”)
S30C/D vertical 134 - 162 (523/4- 633/4”)
S30C/D horizontal 111 - 139 (433/4- 543/4”)
1032A vertical 127 - 155 (50 - 61”)
1032A horizontal 111 - 139 (433/4- 543/4”)
1037B vertical 148 - 176 (581/4- 691/4”)
Speaker mounting bushesSpeaker mounting bushes
Speaker mounting bushesSpeaker mounting bushes
Speaker mounting bushes
Approximate acoustical axis height range in cm (in):

Wall Mount Kit, option -04Wall Mount Kit, option -04
Wall Mount Kit, option -04Wall Mount Kit, option -04
Wall Mount Kit, option -04
CodeCode
CodeCode
Code DescriptionDescription
DescriptionDescription
Description Quantity per speakerQuantity per speaker
Quantity per speakerQuantity per speaker
Quantity per speaker
236-0011 Wall mount plate 1
236-0010 Right angled tube 1
236-0004 Tube top screw 1
U-bracket arm. Note speaker type and orientation: 1
236-3001 1030A, vertical mounting
236-3101 1031A, vertical mounting
236-3102 1031A, horizontal mounting
236-1001 S30C/D, 1032A vertical mounting
236-1101 S30C/D, 1032A horizontal mounting
236-3701 1037B, vertical mounting
209-0001 Stand screw 3
224-1000 Washer, M10 3
236-0006 Bush 2
207-4025 Screw, 4mm 8
Floor Stand Kit, option -05Floor Stand Kit, option -05
Floor Stand Kit, option -05Floor Stand Kit, option -05
Floor Stand Kit, option -05
CodeCode
CodeCode
Code DescriptionDescription
DescriptionDescription
Description Quantity per speakerQuantity per speaker
Quantity per speakerQuantity per speaker
Quantity per speaker
Stand foot. Note speaker type: 1
236-0008 600 mm (23 5/8”) diameter for 1030, 1031
236-0007 710 mm (28”) diameter for 1032, S30, 1037
236-0002 Outer stand tube 1
236-0003 Inner stand tube 1
236-0004 Tube top screw 1
U-bracket arm. Note speaker type and orientation: 1
236-3001 1030A, vertical mounting
236-3101 1031A, vertical mounting
236-3102 1031A, horizontal mounting
236-1001 S30C/D, 1032A vertical mounting
236-1101 S30C/D, 1032A horizontal mounting
236-3701 1037B, vertical mounting
209-0001 Stand screw 3
224-1000 Washer, M10 3
236-0006 Bush 2
207-4025 Screw, 4mm 8
Please check that the kit contains the following items. Notify your GENELEC dealer immediately if any parts are
missing or damaged.
Kit contentsKit contents
Kit contentsKit contents
Kit contents
Genelec Oy, Olvitie 5
FIN-74100 IISALMI, FINLAND
Phone: [phone]
Fax: [phone]
Web: http://www.genelec.com
E-mail: [email protected]
Genelec Document DR99001b
COPYRIGHT GENELEC OY 11/2000
All data subject to change without prior notice
Genelec Inc., 7 Tech Circle
NATICK, MA 01760, U.S.A.
Phone: [phone]
Fax: [phone]
Email: [email protected]
VV
VV
Verer
erer
ertical mountingtical mounting
tical mountingtical mounting
tical mounting
HH
HH
HWW
WW
W
1030A1030A
1030A1030A
1030A 285285
285285
285 265265
265265
265
1031A1031A
1031A1031A
1031A 331331
331331
331 320320
320320
320
S30C/D, 1032AS30C/D, 1032A
S30C/D, 1032AS30C/D, 1032A
S30C/D, 1032A 370370
370370
370 390390
390390
390
1037B1037B
1037B1037B
1037B 483483
483483
483 465465
465465
465
Horizontal mountingHorizontal mounting
Horizontal mountingHorizontal mounting
Horizontal mounting
HH
HH
HWW
WW
W
1031A1031A
1031A1031A
1031A 290290
290290
290 460460
460460
460
S30C/D, 1032AS30C/D, 1032A
S30C/D, 1032AS30C/D, 1032A
S30C/D, 1032A 300300
300300
300 560560
560560
560