Genelec 8000-450 User manual

Genelec 8000-450 Triol Floor Stand
Assembly Instruction
8000-450

Genelec 8000-450 Triol Floor Stand
Figure 1. Exploded view of the 8000-450. Notice that there
is one leg with a groove for cables (B) and two legs with no
groove (A)
Loudspeaker model Stand plate order
code
8020, G Two, 8320 8020-408 (black)
8020-408W (white)
8030, G Three, 8330 8030-408 (black)
8030-408W (white)
8040, G Four, 8340 8040-408 (black)
8040-408W (white)
Table 1. Correct stand plates according to loudspeaker model
The Genelec 8000-450 oor stand is designed to be
used with Genelec loudspeakers listed in Table 1. In
order to guarantee sucient stability and safety, the
correct Genelec stand plate must always be used with
the 8000-450. These are listed in Table 1.
A
A
B
Figure 2. Thread on leg A
Figure 3. Start the assembly by attaching the two triangular
brackets to leg A

Figure 4. Next attach the second leg A
Figure 5. Legs A correctly attached
Figure 6. Leg B is bolted to the triangular brackets from the
outside
Figure 7. Attaching the stand plate

Figure 8. Attaching the cables to a magnetic holder
Figure 9. Magnetic holders keep the cabling tidy
Figure 10. Installation complete
Genelec Document D80000-450. Copyright Genelec Oy 8.2021. All data subject to change without prior notice www.genelec.com
International enquiries:
Genelec, Olvitie 5
FIN-74100, Iisalmi, Finland
Phone [phone]
Email [email protected]
In the U.S. please contact:
Genelec, Inc., 7 Tech Circle
Natick, MA 01760, USA
Phone [phone]
Email [email protected]
In China please contact:
Beijing Genelec Audio Co.Ltd
Room 101, Building B33,
Universal Business Park,
No.10 Jiuxianqiao Road,
Chaoyang District,
100015 Beijing, China
Phone [phone]
Email [email protected]
In Japan please contact:
Genelec Japan Inc.
2-22-21 Akasaka, Minato-ku
07-0052, Tokyo
Phone [phone]
Email [email protected]
In Sweden please contact:
Genelec Sverige
Tureholmsvägen 12
125 35 Älvsjö
Sweden
Phone [phone]
Email [email protected]