Generac Power Systems TMS200 User manual

1 of 2
TMS200
200A Manual Transfer Switch
200A 250VAC
TTS Series
Switches
TMS200
The Generac TMS200 Manual Transfer Switch
Designed for ease of installation with the flexibility for multiple
application options
Flexibility and control for temporary generators
Integrated camlock functionality for mobile generator sources
Features
Image used for illustration purposes only.
Optional Features
=ExtEndEd Warranty availablE
=tHrEE-PHaSE vOltaGE COnFiGUratiOnS availablE
Generac products are designed to the following
standards:
UL1008,
UL508,
UL50,
CSA C22.2 No. 178
NEC 702
NEMA 250
Codes and Standards
=alUMinUM COnStrUCtiOn
=POWdEr-COatEd Ul tyPE / nEMa 3r EnClOSUrE
=StainlESS StEEl HardWarE
=intEGratEd CaMlOCK “QUiCK COnnECt” CaPability
=Utility POWEr Fail rElay alarM
=SlidEbar-tyPE MECHaniCal intErlOCK
=HinGEd “PadlOCKinG” dOOrS
=FiEld MOdiFiEd dOOr SWinG
=Ul1008 liStEd

Cabinet Specifications
Dimensions 20"W x 10"D x 36"H
Weight 53.8 lbs.
Construction
Single Chamber with Main Door
0.080 14GA Aluminum
UL Type / NEMA 3R Rated
Powder Coat Finish for Corrosion Resistance
UL Listed - Non-Automatic Transfer Switch & Suitable for Service Equipment
Stainless Steel Hardware
3-Point Latching System with Pad-Lockable Handle
Mounting Options Wall
H-frame
Installed Pre-wired alarm terminal strip
Electrical Specifications
Voltage/Phase/Amps
120/240 Single-Phase, 200A
120/208 3-Phase, 200A
120/240 3-Phase, 200A
Breaker Generac 200 amp Utility Breaker
Generac 200 amp Generator Breaker
Fault Current Rating 22k AIC Rated
200A Camlock Generator Connection
Single-Phase: Black L1, Red L2, White-Neutral, Green-Ground
3-Phase: Black L1, Red L2, Blue L3, White-Neutral, Green-Ground
Uses 4 CH E1016 Male Connectors
Mating Connector – CH E1016 Female
Input to Generator 350MCM - #6 AWG
Output to Site 350MCM - #6 AWG
Generator Annunciator Connector Deutsch DTM04-12PA-L012
Alarm Terminal Board
Generator Run Alarm
Generator Fail – Shutdown Alarm
Generator Fail – Non Shutdown Alarm
Low Fuel Alarm
Generator Theft Alarm
AC Utility Fail Alarm
Additional Components
Mounting Bracket Installation Mounting Bracket
Alarm Cable 100' length of multi-conductor cable
Enclosure Gasket Full Exterior x 2"W x 1/2"D Closed Cell Gasket
Shipped loose with switch
2 of 2
Application and Engineering Data
TMS200
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2013 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0195630SBY-E / Printed in U.S.A. 03/13/13
Specification characteristics may change without notice. Dimensions and weights are for preliminary purposes only. Please consult a Generac Power Systems Industrial Dealer for detailed installation drawings.