Generalscan GS T52 User manual

SCAN CONFIGURATION GUIDE
GS T52
MOBILE COMPUTER
EN
MOBILE COMPUTER

2
GS T52 SCAN CONFIGURATION GUIDE
Introduction
This guide applies to model number: GS T52 and mainly introduces the ScanSetting
App pre-installed in this device.This APP includes five scanning configuration settings,
which are Scan Options, Output Settings, Format Settings, Barcode Configuration,
and Restore.
Copyright
GENERALSCAN trademarks are registered in many countries around the world. Generalscan Inc,
and/or its subsidiaries, all rights reserved. This manual contains proprietary information of Generals-
can. It is intended solely for the information and use of parties operating and maintaining the equip-
ment described herein. Such proprietary information may not be used, reproduced, or disclosed to
any other parties for any other purpose without the expressed written permission of Generalscan.
All specifications and signs in this guide are subject to change without notice.
All software without licenses shall not be transferred to others.
Service Information
If you have a problem with your equipment, please visit our service page,
www.generalscan.cloud/service.
ScanSetting

FUNCTIONS
Lighting
Aimer
Sound
Vibrate
Exposure
Continuous The device is scanning continuously when you press trigger button.
Multi Scan
FUNCTIONS
Broadcast
Keyboard Output
FUNCTIONS
Prefix
Suffix
Output Coding
Delay Time (ms)
Auto Newline
BARCODES FUNCTIONS DESCRIPTIONS
Enable Enable Codabar
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Transmit Start/Stop Character The start and stop characters of barcode exist in thetransmitted data.
Check Mode Validate and Transmit / Disable / Validate No Transmit
Short Margin Enable Codabar with frames
Enable Enable Code128
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Short Margin Enable Code128 with frames
Enable Enable GS1-128
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable Code 39
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Check Mode Validate and Transmit / Disable / Validate No Transmit
Full ASCII Enable Code39 (Full ASCII)
Base32 Enable Code39 (Base32)
Enable Enable Code 93
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Short Margin Enable Code 93 with frames
Enable Enable Code 11
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Check Mode 2-digit check / 1-digit check
Enable Enable Interleaved 2 of 5
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Check Mode Validate and Transmit / Disable / Validate No Transmit
Short Margin Enable Interleaved 2 of 5 with frames
Enable Enable Discrete 2 of 5/ Industrial 2 of 5
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable IATA 2 of 5 (2 bar)
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable Matrix 2 of 5
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable NEC 2 of 5
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Check Mode Validate and Transmit / Disable / Validate No Transmit
Enable Enable EAN-13
Check Digit Transmit Transmit the barcode data with the EAN-13 check digit.
2 Char Addenda Enable EAN-13 barcode with 2-digit additional code
5 Char Addenda Enable EAN-13 barcode with 5-digit additional code
Addenda Required Enable Addenda Required
Addenda Separator
ISBN Translate
Insert a separator between EAN-13 and the Addenda
Enable ISBN Translate
DESCRIPTIONS
Illumination
Aiming barcodes
There is a sound prompt when scanning successfully.
There is a vibration prompt when scanning successfully.
The devide can decode multiple barcodes that are closely-spaced with a single trigger press.
DESCRIPTIONS
Match APPs with broadcast mode
Match APPs with keyboard Output Mode (Direct Injection / Simulation Injection)
DESCRIPTIONS
Edit the Prefix by adding special characters
Edit the Suffix by adding special characters
Users can choose UTF-8, GB2312 or other coding systems.
Discrete 2 of 5/
Industrial 2of 5
Matrix 2 of 5
IATA 2 of 5 (2 bar)
Output Settings
Code 39
Barcode Configuration
Code 93
EAN-13
NEC 2 of 5
Format Settings
GS1-128
Users can set time interval between two scannings.
Word-wrap
Code128
Code 11
Interleaved 2 of 5
Scan Options
Codabar
When you enable this function, this device is in automatic exposure control; when you disable this funtion, the device is in fixed exposure control.
We suggest you enable this function. Otherwise, the barcode may not be recognized.
GS T52 SCAN CONFIGURATION GUIDE
Output
3

Enable Enable EAN-8
Check Digit Transmit Transmit the barcode data with the EAN-8 check digit.
2 Char Addenda Enable EAN-8 barcode with 2-digit additional code
5 Char Addenda Enable EAN-8 barcode with 5-digit additional code
Addenda Required Enable Addenda Required
Addenda Separator Insert a separator between EAN-8 and the Addenda
Enable Enable MSI
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Check Mode
Enable a single mod 10 checksum check
Enable a mod 11 and a mod 10 checksum checks
Enable two mod 10 checksum checks
Enable a single mod 10 checksum check and remove checksum
Enable a mod 11 and a mod 10 checksum checks and remove the checksum
Enable two mod 10 checksum checks and remove the checksum
Enable Enable UPC-A
Short Margin Enable UPC-A with frames
Check Digit Transmit Transmit the barcode data with the UPC-A check digit.
Number System Transmit Transmit the barcode data with the UPC-A number system
2 Char Addenda Enable UPC-A barcode with 2-digit additional code
5 Char Addenda Enable UPC-A barcode with 5-digit additional code
Addenda Required Enable Addenda Required
Addenda Separator Insert a separator between UPC-A and the Addenda
Enable UPC-E1 Enable UPC-E1
Enable UPC-E0 Enable UPC-E0
Check Digit Transmit Transmit the barcode data with the UPC-E check digit.
Number System Transmit Transmit the barcode data with the UPC-E number system
2 Char Addenda Enable UPC-E barcode with 2-digit additional code
5 Char Addenda Enable UPC-E barcode with 5-digit additional code
Addenda Required Enable Addenda Required
Addenda Separator Insert a separator between UPC-E and the Addenda
UPC-E0 Expand Enable UPC-E0 Expand
Enable Enable HanXin
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable Composite
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
With UPC Enabled Enable UPC
Enable Enable MaxiCode
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable Micro PDF417
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable PDF417
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable QR Code
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable DataMatrix
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
GS1 DataBar Standard Enabled Enable GS1 DataBar standard
GS1 DataBar Limited Enabled Enable GS1 DataBar Limited
GS1 DataBar Expanded Enabled Enable GS1 DataBar Expanded
GS1 DataBar Expanded Min Length Customize minimum characters of scanned barcode
GS1 DataBar Expanded Max Length Customize maximum characters of scanned barcode
Enable Enable Aztec Code
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable Hong Kong 2 of 5
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Enable Enable Korean Post
L1 Length Customize minimum characters of scanned barcode
L2 Length Customize maximum characters of scanned barcode
Check Digit Transmit Transmit the barcode data with the Korean Post check digit
Reverse Enable reverse Korean Post
Enable Enable Pharmacode
Reverse Enable reverse Pharmacode
Aztec Code
QR Code
Hong Kong 2 of 5
Composite
EAN-8
HanXin
MaxiCode
UPC-A
Pharmacode
GS1 DataBar
PDF417
DataMatrix
UPC-E
Korean Post
MSI
Micro PDF417
Barcode Configuration
GS T52 SCAN CONFIGURATION GUIDE
4

Japan Post Enable Japan Post
PostNL KIX-code Enable PostNL KIX-code
UK Royal Mail Enable UK Royal Mail
USPS Planet Code Enable USPS Planet Code
USPS PostNet Enable USPS PostNet
USPS Intelligent Mail Enable USPS Intelligent Mail
FUNCTIONS
Restore Restore the factory scan configuration
DESCRIPTIONS
Restore
Postal
Barcode Configuration
GS T52 SCAN CONFIGURATION GUIDE
5

www.generalscan.cloud