Generic Hamilton User manual

Assembly Instruction
Item#: FT-51126
Product Name: 30’’ square steel fire pit
WARNINGS:
This fire bowl is intended for outdoor use only. Do not use on wooden decks.
This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other
combustible materials in the fire bowl.
Not for use by children. Keep children and pets away from the fire bowl.
The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
Never leave the burning fire bowl unattended, and always extinguish the fire completely
before leaving the fire bowl.
Do not use near flammable or combustible objects or materials.
When the fire bowl is in use, the handle on the mesh screen can reach extreme
temperatures that can cause serious injury to an unprotected hand. Use a poker or an
appropriate heat resistant glove or pad when handling.
Check local fire regulations and municipal by-laws for safe use.
Some parts may contain sharp edges—especially as noted in the manual. Wear
protective gloves if necessary.

FIRE PIT PARTS LIST
No. PARTS Qty
A Mesh wire cover 1
B Wood grate 1
C Fire bowl 1
D Legs 4
E Bottom ring 1
F Poker 1
HARDWARE LIST
No. Hardware Qty
AA M6 x 10 mm Bolt 8
BB M6 x 25 mm Bolt 4
CC M6 Nut 4
Step By Step Assembly Instructions:
Step 1: Connect the legs (D) to the bottom ring (E) by using M6 x 25 mm bolt (BB) and M6
Nut(CC), Please DO NOT tighten the hardware at this time.
A
B
F
E
C
D
E
BB

D
CC

Step 2:. Connect the assembled base to fire bowl (C) by using M6 x 10 mm bolt (AA). Tighten all
the hardware.
Step 4:.Turn the assembled fire bowl over, put the wood grate (B) into the fire bowl (C), place
the mesh wire cover (A) on the fire bowl (C), and finally place poker (D) beside base assembly.

C
CC
B
A
D