Genesis GLSD08B User manual

Operator’s Manual
Manuel d’utilisation
Manual del Operario
8V Lithium-ion Screwdriver
Tournevis de 8 V au Lithium-ion
Destornillador de Litio-ion de 8 V
GLSD08B
888-552-8665
TOLL FREE
HELP LINE:
WEBSITE: www.genesispowertools.com

English
8V Lithium-ion Screwdriver
Operator’s Manual GLSD08B
SPECIFICATIONS
WARNING:To reduce the risk of injury, user must read and understand this
operator’s manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WARNING:
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENERAL SAFETY RULES
WARNING:Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
.
WARNING:Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
Keep your work area clean and well lit.
Do not operate power tools in explosive atmospheres
2

3
English
Keep bystanders, children, and visitors away while operating a power tool.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet.
• Do not expose power tools to rain or wet conditions.
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
• Do not abuse the cord.
• When operating a power tool outside, use an extension cord suitable for
outdoor use.
• Do not use AC only rated tools with a DC power supply.
PERSONAL SAFETY
• Stay alert,
• Use safety equipment.
• Dress properly.
• Avoid accidental starting.
• Remove any adjusting keys or wrenches before turning the power tool on.
• Do not overreach.
.
• If devices are provided for connection of dust extraction and collection
facilities, ensure these are connected and properly used.
• Do not use a ladder or unstable support.
• Keep tool handles dry, clean and free from oil and grease.
TOOL USE AND CARE
• Secure the workpiece.
• Do not force the power tool.
• Use the correct power tool for the job.
• Do not use tool if switch does not turn it on or off.
.

English
8V Lithium-ion Screwdriver
Operator’s Manual GLSD08B
• Turn the power tool off, and disconnect the plug
.
.
• Store idle tool out of reach of children and other inexperienced persons.
• Maintain power tools with care.
• Use recommended accessories.
• Keep cutting tools sharp and clean.
.
• Feed the workpiece in the correct direction and speed.
• Never leave the tool running unattended, turn the power off.
BATTERY TOOL USE AND CARE
Ensure the switch trigger is in the off position before inserting battery pack.
Recharge only with the charger specified by the manufacturer.
Use battery tools only with specified battery packs
Avoid storing the battery pack in a container with other metal objects such
as nails, coins, clips, keys, screws, or other small metal objects that can
make a connection from one terminal to another
Under abusive conditions, liquid may be ejected from the batter
Battery tools do not need to be plugged into an electrical outlet
WARNING:USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR
OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST
AND ASBESTOS. Direct particles away from face and body. Always operate tool in a well-
ventilated area and provide for proper dust removal. Use dust collection system wherever
possible. Exposure to the dust may cause serious and permanent respiratory or other
injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing
the dust, and avoid prolonged contact with the dust. Allowing dust to get into your
mouth or eyes, or lay on your skin may promote absorption of harmful material. Always
use properly fitting NIOSH/OSHA approved respiratory protection appropriate for dust
exposure, and wash exposed areas with soap and water.
SERVICE
• Haveyourpowertoolservicedbyaqualiedrepairperson
• Serviceyourpowertoolperiodically.
4

5
English
WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND
OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
EXTENSION CORDS
Grounded tools require a three wire extension cord.
Guidelines for Using Extension Cords
SPECIFIC SAFETY RULES FOR CORDLESS SCREWDRIVERS
WARNING:DO NOT LET COMFORT OR FAMILIARITY WITH THE PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY
RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
WARNING:Hold the tool by insulated gripping surfaces when performing an
operation where cutting tools may contact hidden wiring or its own cord. Contact with a
“live” wire will make exposed metal parts of the tool “live” and shock the operator!
•
Do not leave the tool running
.
•
Be Aware that this tool is always in an operating condition
,
•
When operating the tool from an elevated position
•
Always hold the tool firmly in your hands before switching the tool “ON”
.
•
Wear eye and hearing protection.
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0

English
8V Lithium-ion Screwdriver
Operator’s Manual GLSD08B
•
Protect your lungs
.
•
Always place the switch in the locked or off position
•
Do not place battery tools near fire or heat.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER &
BATTERY
• Save these Instructions.
• Before using the battery charger,
• Use only the charger
• Do not recharge the battery in damp or wet environments.
• Do not operate the charger with damaged cord or plug.
• Do not operate a charger if it has received a sharp blow,
• Do not disassemble a charger or a battery pack.
.
• Do not charge the battery pack
• Place the charger on flat non-flammable surface
.
• To reduce risk of electric shock,
• If operating time has become excessively shorter,
• Battery leakage may occur
• Do not attempt to use a step-up transformer,
• Do not short the battery pack.
• Do not charge a battery pack inside a box or container of any kind.
• Do not allow anything to cover or clog the charger vents.
• Do not incinerate the battery pack
• Disconnect the charger from the power source when not in use.
6

7
English
WARNING: A battery short can cause a large current flow, overheating,
possible burns and even a breakdown.
IMPORTANT BATTERY INFORMATION: DISPOSING OF THE BATTERY
SAVE THESE INSTRUCTIONS
YOUR SCREWDRIVER
UNPACKING AND CONTENT
IMPORTANT:Due to modern mass production techniques, it is unlikely the product
is faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE:
Description QTY Description QTY
11
21
7
5
4
3
6
8
910
FIG 1

English
8V Lithium-ion Screwdriver
Operator’s Manual GLSD08B
OPERATION
WARNING:
To reduce the risk of serious personal injuries, read and follow all
important safety warning and instructions before using this tool.
WARNING: Always be sure that the tool is switched off before insertion or
removal of the battery pack.
INSTALLING OR REMOVING THE BATTERY PACK
(FIG 2)
CHARGING THE BATTERY (FIG 3)
NOTE:
NOTE:
TRIGGER SWITCH ACTION
TWO-SPEED GEAR SWITCH
OVERLOAD PROTECTION
LED WORK LIGHT
8
FIG 2
7
8
FIG 3
89
10 LOCKING TAB

9
English
HEX CHUCK (FIG 4)
CLUTCH (TORQUE) SETTINGS
GENERAL SCREWDRIVING
GENERAL DRILLING
WARNING:Forcing a drill bit, bending or twisting the bit, or failure to maintain
balance in case of binding and breakthrough can result in serious personal injury.
FIG 4
LOCKING
SLEEVE
UNLOCK

English
8V Lithium-ion Screwdriver
Operator’s Manual GLSD08B
MAINTENANCE
CLEANING
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
LUBRICATION
TWO-YEAR WARRANTY
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.
TOLL-FREE HELP LINE
888-552-8665
www.genesispowertools.com
©Richpower Industries, Inc. All Rights reserved
10

11
Français
SPÉCIFICATIONS
AVERTISSEMENT: Pour réduire le risque de blessure, l’utilisateur doit lire
et assimiler ce manuel d’utilisation avant de se servir de l’outil. Conservez ce manuel
comme référence ultérieure.
Numéro d’aide sans frais: 1-888-552-8665.
AVERTISSEMENT:
Repérez ce symbole qui signale d’importantes
précautions de sécurité. Cela veut dire faites
attention ! Votre sécurité est en jeu.
RÈGLES GÉNÉRALES DE SÉCURITÉ
AVERTISSEMENT: Certaines poussières produites par des appareils
électriques de ponçage, sciage, meulage, perçage et autres travaux de construction
contiennent des produits chimiques connus pour causer cancer, anomalies congénitales
et autres atteintes à la reproduction. Voici quelques exemples de ces produits nocifs :
AVERTISSEMENT:LISEZ ET ASSIMILEZ TOUS LES AVERTISSEMENTS,
MISES EN GARDE ET INSTRUCTIONS D’UTILISATION AVANT DE VOUS SERVIR DE
CET ÉQUIPEMENT. Sinon vous risquez commotion électrique, début d’incendie et/ou
blessures corporelles.
CONSERVEZ CES INSTRUCTIONS
LIEU DE TRAVAIL:
• Gardez propre la zone de travail.
É

Français
Tournevis de 8 V au Lithium-ion
Manuel d’utilisation GLSD08B
12
• Ne pas utiliser d’outils électriques dans des atmosphères explosives,
• Garder les badauds, enfants et visiteurs à l’écart pendant l’utilisation d’un
outil électrique.
SÉCURITÉ ÉLECTRIQUE
• La puissance des bouchons outil doit correspondre à la prise électrique.
• NE PAS exposer les outils électriques à la pluie ou l’humidité.
• Éviter tout contact du corps avec des surfaces mises à la terre,
• NE PAS maltraiter le cordon d’alimentation.
• Lorsque l'exploitation d'un pouvoir en dehors des outils,
• NE PAS utiliser l'AC notées les outils d'une alimentation en courant continu.
SÉCURITÉ PERSONNELLE
• Rester attentif, prêter attention au travail et faire prévue de bon sens lors
de l’utilisation de tout outil électrique.
• Utiliser l’équipement de sécurité. Toujours porter une protection oculaire.
• Portez une tenue appropriée.
• Évitez d'un démarrage accidentel. S
• Enlevez les clés et outils de réglage avant de mettre en marche.
• NE travaillez pas à bout de bras.
• SI dispositifs sont prévus pour la connexion d'extraction des poussières
et des installations de collecte,
.

13
Français
• Maintenez l’outil sec, propre et sans huile ou graisse.
UTILISATION ET ENTRETIEN DE L’OUTIL
• Sécurisation de la pièce à travailler.
• NE forcez pas sur l’outil.
• Utilisez le bon outil pour la tâche.
• N’utilisez pas l’outil si son interrupteur de marche/arrêt fonctionne mal.
• Débrancher l’outil avant d’effectuer des réglages,
• Ranger les outils non utilisés hors de portée des enfant set des personnes
n’ayant pas reçu de formation adéquate.
• Entretenir soigneusement les outils.
• N’utilisez que des accessoires recommandés.
• Maintenir des outils de coupe nette et propre.
• Poussez la pièce à travailler dans la bonne direction à la bonne vitesse.
• NE jamais laisser l'outil en marche sans surveillance.
UTILISATION ET ENTRETIEN DES OUTILS À BATTERIE
Veillez à ce que l’interrupteur soit dans la postion de fermeture
Rechargez avec le chargeur spécifié par le fabricant
Utilisez uniquement des outils électriques conçus spécifié batterie
Évitez de stocker la batterie dans un conteneur
Dans des conditions abusives,

Français
Tournevis de 8 V au Lithium-ion
Manuel d’utilisation GLSD08B
14
Les outils fonctionnant sur batteries n’ayant pas besoin d’être branchés sur
une prise secteur
AVERTISSEMENT: L’UTILISATION DE CET OUTIL PEUT GÉNÉRER ET
BRASSER DE LA POUSSIÈRE ET D’AUTRES PARTICULES EN SUSPENSION DANS L’AIR,
COMME SCIURE, SILICE CRISTALLINE ET AMIANTE. Dirigez le flot de particules hors
de votre visage et de votre corps. Faites toujours fonctionner l’outil dans une zone bien
ventilée, et veillez à une bonne évacuation de la poussière. Utilisez un système de collecte
de poussières dans la mesure du possible. L’exposition aux poussières peut causer des
troubles respiratoires ou autres sérieux et permanents, incluant la silicose (une sérieuse
affection des poumons), le cancer et la mort. Évitez de respirer la poussière et évitez un
contact prolongé avec elle. Si vous laissez entrer la poussière dans votre bouche ou vos
yeux, ou se déposer sur votre peau, vous risquez de provoquer l’absorption de matières
dangereuses. Portez toujours une protection respiratoire approuvée NIOSH/OSHA bien
ajustée convenant à la protection contre les poussières, et lavez les surfaces de peau
exposées à l’eau et au savon.
SERVICE
• Demandez à votre outil électrique à être desservie par une personne
qualifiée en utilisant
.
• L'entretien de votre outil électrique périodiquement.
AVERTISSEMENT: LISEZ ET ASSIMILEZ TOUS LES AVERTISSEMENTS,
MISES EN GARDE ET INSTRUCTIONS D’UTILISATION AVANT DE VOUS SERVIR DE
CET ÉQUIPEMENT. Sinon vous risquez commotion électrique, début d’incendie et/ou
blessures corporelles.
CONSERVEZ CES INSTRUCTIONS
CORDONS RALLONGES
Les outils mis à la terre nécessitent un cordon rallonge à trois fils.
Conseils d’utilisation de cordons rallonges

15
Français
RÈGLES DE SÉCURITÉ SPÉCIFIQUES POUR TOURNEVIS
SANS FIL
AVERTISSEMENT: NE laissez PAS une fausse sécurité s’installer provoquée
per confort et familiarité avec le produit (suite à des utilisations répétées) remplacer la
stricte application des règles de sécurité pour la scie à onglets. Si vous utilisez cet outil
dangereusement et incorrectement, vous pouvez subir de sérieuses blessures.
AVERTISSEMENT: Maintenez l’outil par les surfaces de prise isolées
quand vous effectuez une opération où l’outil de coupe peut couper des fils électriques
cachés ou son propre cordon. Le contact avec un fil sous tension peut également mettre
sous tension des parties métalliques exposées de l’outil, et provoquer une commotion
électrique pour l’opérateur!
•Ne pas laisser l’outil en marche.
Garder à l’esprit que cet outil est toujours prêt à fonctionner,
•
Quand vous utilisez l’outil d’une position élevée
,
Toujours tenir l'outil fermement dans vos mains avant de mettre l'outil sur la
position «ON».
• Portez une protection des yeux et oreilles.
• Protection respiratoire.
• Toujours placer l'interrupteur en position dans la position verrouillée ou
ARRÊT
• Ne pas placer les outils électriques sans fil ou leurs batteries
CONSERVEZ CES INSTRUCTIONS
Calibre de fil minimum recommandé pour cordons de rallonge (en 120 Volts)
Ampérage
nominal
(à pleine
charge)
Longueur du cordon de rallonge
7.6 m
25 Feet
15.2 m
50 Feet
22.9 m
75 Feet
30.5 m
100 Feet
45.7 m
150 Feet
61.0 m
200 Feet
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0

Français
Tournevis de 8 V au Lithium-ion
Manuel d’utilisation GLSD08B
16
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES RELATIVES
AU CHARGEUR ET AU FONCTIONNEMENT DE LA BATTERIE
Conserver ces instructions !
Avant d'utiliser le chargeur de batteries
Utilisez uniquement le chargeur qui accompagne votre produit
Ne pas recharger la batterie en environnement humide ou mouillé
Ne pas utiliser le chargeur avec cordon endommagé ou la fiche
Ne pas utiliser le chargeur s’il a reçu un choc violent
Ne pas désassemblez le chargeur ou la bloc de batterie
Ne pas chargez le bloc de batterie
Placez le chargeur sur une surface plate ininflammable
Afin de réduire le risque de choc électrique,
Si l’autonomie de l’outil avant recharge est presque nulle,
Il peut y avoir une fuite de batterie dans des conditions extrêmes
d’utilisation ou de température.
Ne pas essayer d'utiliser un transformateur élévateur,
Ne pas court-circuiter les bornes de le batterie
Ne pas chargez la bloc de batterie dans une boîte ou un contenant de tout
genre
Ne pas couvrir ou obstruer les évents du chargeur
Ne pas incinérer la bloc de batterie,
Lorsqu’il n’est pas en usage
AVERTISSEMENT: Un court-circuit de batterie peut provoquer une
intensité de courant importante, une surchauffe, des brûlures éventuelles et même une
panne.

17
Français
INFORMATIONS IMPORTANTES AU SUJET DE LA BATTERIES
LITHIUM-ION
CONSERVEZ CES INSTRUCTIONS
VOTRE TOURNEVIS SANS FIL
OUVERTURE DE L`EMBALLAGE ET CONTENU
IMPORTATNT:Grâce à des techniques modernes de production de masse, il est
peu probable que l'outil est défectueux ou qu'une pièce est manquante. Si vous trouvez
quelque chose de mal, ne pas faire fonctionner l'outil jusqu'à ce que les parties ont été
remplacés ou la faute a été corrigée. Le fait de ne pas le faire pourrait entraîner des
blessures graves.
CONTENU DE CARTON DE PIÈCES EN VRAC:
Description QUAN Description QUAN
11
21
7
5
4
3
6
8
910
FIG 1

Français
Tournevis de 8 V au Lithium-ion
Manuel d’utilisation GLSD08B
18
FONCTIONNEMENT
AVERTISSEMENT:
Pour réduire le risque de graves blessures
corporelles, lisez et suivez toutes les instructions et avertissements de sécurité avant
d'utiliser cet outil.
AVERTISSEMENT: Assurez-vous toujours que l'outil est à l'arrêt avant
d'insérer ou de retirer le bloc de batteries.
INSTALLATION OU RETRAIT DE LA BATTERIE
(FIG 2)
CHARGEMENT DES BATTERIES (FIG 3)
REMARQUE:
REMARQUE :
ACTIONNEMENT DE LA GÂCHETTE D’INTERRUPTEUR
COMMUTATEUR DE DEUX VITESSES
PROTECTION DE SURCHARGE
FIG 2
7
8
FIG 3
89
10
LANGUETTE dE
VErrOUILLAGE

19
Français
ÉCLAIRAGE DE LA ZONE DE TRAVAIL À DEL
MANDRIN DE HEXAGONALE (FIG 4)
RÉGLAGES DE MANDRIN (COUPLE)
VISSAGE EN GÉNÉRAL
PERÇAGE EN GÉNÉRAL
AVERTISSEMENT:Forcer sur un foret de perçage, en le fléchissant
ou le tordant, ou l’absence de maintien d’équilibre en cas de grippage ou de
percée brusque, peuvent entraîner de sérieuses blessures.
FIG 4
BAGUE dE
VErrOUILLAGE
dÉVErrOUILLEr

Français
Tournevis de 8 V au Lithium-ion
Manuel d’utilisation GLSD08B
20
ENTRETIEN
NETTOYAGE
AVERTISSEMENT: Ne jamais laisse de liquides tels que le fluide de freins,
l’essence, les produits à base de pétrole, les huiles pénétrantes, etc., entrer en contact
avec les pièces en plastique. Les produits chimiques peuvent endommager, affaiblir ou
détruire le plastique, ce qui peut entraîner des blessures graves.
LUBRIFICATION
GARANTIE DE DEUX ANS
CE PRODUIT N’EST PAS GARANTI S’IL EST UTILISÉ POUR DES FINS INDUSTRIELLES OU COMMERCIALES.
LES ACCESSOIRES COMPRIS DANS CE KIT NE SONT PAS COUVERTS PAR LA GARANTIE DE 2 ANS.
LA BATTERIE EST GARANTIE POUR UNE (1) AN APRÈS LA DATE DE L'ACHAT.
LIGNE D’ASSISTANCE SANS FRAIS
888-552-8665
www.genesispowertools.com
Table of contents
Languages:
Other Genesis Power Screwdriver manuals
Popular Power Screwdriver manuals by other brands

Bosch
Bosch GSR Professional 36 VE-2-LI Original instructions

Rupes
Rupes DD122 Operating and maintenance instructions

XTline
XTline LCD777-9SC manual

EINHELL
EINHELL KSS 12 Operating and maintenance instructions

Dixon Automatic Tool
Dixon Automatic Tool SKD-BN7030L Operation and maintenance manual

Sumake
Sumake CBP35 manual