ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 6
Section 1: Introduction
GENIE is an interoperable 5Ghz wireless + IP Key Panel system.
GENIE Panel, 'Matrix-free' IP network intercom system
Fully Scalable and Flexible Hybrid solution
➢GENIE Solo: 10 to 70 talk/listen paths
➢GENIE Trio: 30 to 210 talk/listen paths
GENIE is the industry-first converged digital intercom system turning into a whole new creativity from a traditional
concept of the intercom system. With GENIE, Remote Antennas, Speaker Stations and Ethernet Beltpacks can all
be connected through Power of Ethernet (PoE) with one Base Station while supporting the wireless Beltpack
connections at the same time. By this boundaryless hybrid solution of wired or wireless, GENIE offers a highly
scalable and flexible system configurations and capabilities.
GENIE provides easy-to-extend system structure from an initial small system to large scale system tier by tier
upon the requirement. The GENIE Solo provides connectivity for 60 Speaker Stations, Ethernet Beltpacks or
Repeaters and 128 wireless Beltpack connections via six Remote Antennas. 10 to 70 talk/listen paths are available
on wired or wireless devices. And the GCM (GENIE Configuration Manager) supports for an efficient and integrated
management of the system by its easy setup of the configurations and various monitoring functions with full
visibility.
GENIE is a Daisy-chain connection enabled system that allows Remote Antennas, Speaker Stations and Ethernet
Beltpacks are connected to the Base Station using a PoE transmitting both data and power. In view of system
redundancy, loopback can also be set by building a ring connection and other linking topologies such as a Star
and Tree connections are also available. These special features allow for the use of cat-5e STP cables to easily
wire and install complex systems with a minimal workload.
GENIE Key Panel
GENIE Panels are 'matrix-free' IP network intercom system. It is also designed to be used in conjunction with
GENIE, an integrated system of IP intercoms and wireless Beltpacks. The Panels provide various audio paths
such as the peer-to-peer communication paths and group key, interoperation with GENIE group channels, Line
connections, Line audio routings and configuring IFBs. By the interoperation between GENIE and Panels, the
system provides an integrated 'matrix-free' IP networking intercom solution that comprises IP intercom, wireless
devices and Panels. See GENIE Panel user Manual.
1.1 System overview
Base Station BS1000
⚫System configured by Base Station BS1000 + Remote Antenna RA100DW or RA100 + Ethernet Beltpack
IBP10 + Speaker Station ISS800 + Wireless Beltpack BP850 or BP850S + Repeater RBS85.
One Base Station (GENIE Solo) offer up to 60 GENIE devices (Ethernet Beltpacks, Speaker Stations, Remote
Antennas, Repeaters) and 128 wireless Beltpacks simultaneously. Up to six Remote Antennas (RA100DW,
RA100) can be connected to each Base Station. And, up to 128 wireless Beltpacks and, 10 Ethernet Beltpacks
or Speaker Stations or Repeaters can be connected to one Remote Antenna.
One Remote Antenna supports 10 talk/listen paths. Even while multiple Talk channels of a device such as
Speaker Station are in active, it only occupies one talk/listen path. Thus, one Base Station with six Remote
Antennas offers up to 70 talk/listen paths for the wireless and Ethernet devices. However, for an instant, while
the Speaker Station is talking with two Base Stations simultaneously, it occupies two talk/listen paths.
⚫Three Base Stations (GENIE Trio) offer up to 210ch talk/listen paths for the wireless and Ethernet devices. The
GENIE Trio, with 384 wireless Beltpacks, and 180 Ethernet Beltpacks or 180 Speaker Stations.
⚫Ethernet synchronization is applied between devices connected to the Ethernet, avoiding RF interference,
packet loss, delay, and jitter among all devices being connected to the Ethernet.
⚫The GCM (GENIE Configuration Manager) enables setting and pairing, as well as monitoring each device's
frequency data spectrum, links and battery status.
Base Station BS850
Base Stations BS1000 and BS850 have different connection capacities. The Remote Antenna is connected up to
six to the BS1000, and up to three to the BS850.
⚫One Base Station BS850 (GENIE Solo) offer up to 30 GENIE devices (Ethernet Beltpacks, Speaker Stations,
Remote Antennas, Repeaters) and 128 wireless Beltpacks simultaneously.
⚫Three Base Stations BS850 (GENIE Trio) offer up to 120ch talk/listen paths for the wireless and Ethernet
devices. The GENIE Trio, with 384 wireless Beltpacks, and 90 Ethernet Beltpacks or 90 Speaker Stations.
⚫Ethernet synchronization is applied between devices connected to the Ethernet, avoiding RF interference,
packet loss, delay, and jitter among all devices being connected to the Ethernet.
⚫The GCM enables setting and pairing, as well as monitoring each device's frequency data spectrum, links and
battery status.
