Genie BS1000 User manual

ⓒ2020 LaON Technology Co., Ltd. All rights reserved.
Base Stations BS1000, BS850
Remote Antennas RA100DW, RA100
Repeater RBS85
Ethernet Beltpack IBP10
Wireless Beltpack BP850, BP851
Wireless IFB Receiver WR850
Converged Intercom System
Genie Quick-Start Guide (Version V2230705)
La O N Technology

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 2
Contents
Section 1: Introduction
6
1.1 System overview
6
Base Station BS1000
6
Base Station BS850
6
Genie devices
7
Genie main features
7
1.2 Example of using Genie system
9
Using Remote Antennas and Repeaters
9
Example of Genie system configuration
9
Base Station BS1000
10
Base Station BS850
11
Genie Trio system
11
Multi-Sync connections for Ethernet synchronizations.
12
Genie Connections
12
Daisy-chain ring configuration (Power and data redundancy)
12
Configures a redundancy system
13
WAN connections
13
Genie group channels
14
IFB and IC/ISO communications in one system
14
System usage of the stand-alone operation
14
System usage with Line devices
15
Master Beltpack (MB) mode
15
Section 2: Product overview
16
2.1 Genie equipment
16
Base Station BS1000 equipment
16
Base Station BS850 equipment
16
Remote Antenna RA100DW equipment
17
Remote Antenna RA100 equipment
17
Repeater RBS85 equipment
17
Ethernet Beltpack IBP10 equipment
18
Wireless Beltpack BP850, BP851 equipment
18
Wireless IFB Receiver WR850 equipment
18
Battery charger equipment
19
Headsets
19
2.2 Menu maps
20
Section 3: Installing a System
23
Section 4: Operating the Base Station BS1000
23
4.1 Connecting the Base Station BS1000
23
4.2 Operating the Base Station BS1000
25
Section 5: Operating the Base Station BS850
31
5.1 Connecting the Base Station BS850
31
5.2 Operating the Base Station BS850
32
Section 6: Operating the Remote Antenna and Repeater
36
6.1 Connecting the Remote Antenna RA100DW, RA100
36
Connecting the Remote Antenna RA100DW
36
Connecting the Remote Antenna RA100
38
6.2 Operating the Remote Antenna RA100DW, RA100
38
6.3 Connecting the Repeater RBS85
38
6.4 Operating the Repeater RBS85
39
Section 7: Operating the Ethernet Beltpack IBP10
39
7.1 Connecting the Ethernet Beltpack IBP10
39
7.2 Operating the Ethernet Beltpack IBP10
40
Section 8: Operating the wireless Beltpack BP850, BP851
43
8.1 Connecting the wireless Beltpack BP850, BP851
43
8.2 Operating the the wireless Beltpack BP850, BP851
43
Section 9: Wireless IFB Receiver WR850
50

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 3
Section 10: Specifications
52
10.1 Base Station BS1000
52
10.2 Base Station BS850
53
10.3 Remote Antenna RA100DW
54
10.4 Remote Antenna RA100
54
10.5 Repeater RBS85
55
10.6 Ethernet Beltpack IBP10
55
10.7 Wireless Beltpack BP850, BP851
56
10.8 Wireless IFB Receiver WR850
56
10.9 Battery charger BATCHG125
57
10.10 Battery charger BATCHG225
57
10.11 Rechargeable battery pack
57
10.12 Headsets, Gooseneck Mic
58
Section 11: Glossary
59

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 4
Important Safety Information
1. For Genie systems, to reduce the risk of electric shock, explosion or fire
⚫Use only the supplied AC power adapter
⚫Do not disassemble the product
⚫Avoid contact with liquids besides the permitted certain equipment
⚫Use only the proper type of battery and rechargeable battery supplied by the manufacturer
2. Battery Safety and Cautions
⚫Do not charge with any other AC power adapter or charger.
⚫Do not burn, disassemble, bend or short-circuit the battery.
⚫Dispose of used up battery promptly and safely according to local regulations.
⚫Keep battery away from children.
⚫Do not short the metal contacts with electrically conducting material such as bracelets, keys, and etc.
⚫Recommended battery storage temperature is -20 °C to 30°C for less than 1 year, -20°C to 40°C for less
than 90 days, -20 °C to 50°C for Less than 30 days.
⚫Recommended Battery charging temperature is 0°C to 40°C
⚫Do not burn or expose batteries to excessive heat such as sunshine or other heat sources
⚫When using alkaline or other maker’s rechargeable batteries other than LaON provided rechargeable
batteries, use the same batteries as packaged by the makers for the same specifications, related current
and voltage. In case of using non-LaON provided rechargeable batteries, use the maker designated battery
charger. Two or Four batteries to be used together by putting into the Battery Sled of LaON products should
be managed to have the same residual time, life and recharged with same cycles. Using batteries together
with different specifications and natures may cause damages on inner parts of the applicable LaON product
and affect battery operating time.
3. Antenna Safety and Cautions
⚫Use only manufacturer supplied antennas.
⚫Antenna shall be mounted in such a manner to minimize the potential for human contact during normal
operation. The external antennashould notbe contactedduring operation.The minimum separation distance
of 7.9 inches (20 cm) from the antenna to the body of user required.
Genie system operates in the 5GHz UNII band frequency range. Genie system is approved for license free use
in most countries. There may be restrictions on the use of some bands or RF spectrum operations in some
countries. Therefore, it is your responsibility to confirm with the designated authorizer in your local area whether
the equipment of the Genie system approved to use in your country or not.
NOTICE
Illustrations, figures and images of this publication are only for explaining equipment’s operations and
functions and may roughly reflect the actual equipment.
Contact the designated distributors or retailers to avoid erroneous interpretations or language translations
that may cause equipment malfunctioning.
The information herein, including but not limited to, illustrations, figures and images subject to change
without prior notice and shall not be interpreted as an expressed or implied commitment on LaON
Technology’s part.
With due respect, LaON Technology, the manufacturer of the equipment does not provide any expressed
or implied warranty to anything included in this operating instruction and shall have no legal responsibility
for any implied warranties of suitableness for a specific application or for any special, indirect, or
consequential damages. LaON Technology may update this publication at its own discretion.

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 5
Copyright © 2019 Laon Technology Co., Ltd.
All rights reserved.
The products described in this document are distributed under licenses that limit usage, copying, and deployment.
The Software described in this document is furnished under a license agreement and does not provide any rights other
than restricted licenses. Only usable depending on the terms of the contract.
No part of this document may be reproduced without prior written approval of Laon Technology.

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 6
Section 1: Introduction
Genie is an interoperable 5Ghz wireless + IP Key Panel system.
Key Panel, 'Matrix-free' IP network intercom system
Fully Scalable and Flexible Hybrid solution
⚫Genie Base Station BS1000: Wireless 70 Talk paths and 128 Listen paths
Genie is the industry-first converged digital intercom system turning into a whole new creativity from a traditional
concept of the intercom system. The Remote Antennas, Key Panels and Ethernet Beltpacks can all be connected
through LAN or PoE (Power of Ethernet) to one Base Station while supporting the wireless Beltpack connections
at the same time. By this boundaryless hybrid solution of wired or wireless, Genie offers a highly scalable and
flexible system configurations and capabilities.
Genie provides easy-to-extend system structure from an initial small system to large scale system tier by tier upon
the requirement. One Genie System (Solo) can connect 120 Ethernet Beltpacks or 60 Repeaters to 6 Remote
Antennas. The 128 wireless Beltpacks connect to any Genie wireless device. The 70 Talk and unrestricted Listen
paths are available on wired or wireless devices. And the GCM (or GCMW, GCMV2, Genie Configuration Manager)
supports for an efficient and integrated management of the system by its easy setup of the configurations and
various monitoring functions with full visibility.
GCM: Wireless device + Ethernet Beltpack + 20 Channel Key Panel Configuration
GCMW: Wireless device + Ethernet Beltpack + 20 Channel Key Panel + WAN Link Configuration
GCMV2: Wireless device + Ethernet Beltpack + 128 Channel Key Panel + WAN Link Configuration
Genie is a Daisy-chain connection enabled system that allows Remote Antennas and Ethernet Beltpacks are
connected to the Base Station using a PoE transmitting both data and power. In view of system redundancy,
loopback can also be set by building a ring connection and other linking topologies such as a Star and Tree
connections are also available. These special features allow for the use of cat-5e STP cables to easily wire and
install complex systems with a minimal workload.
Key Panel
Genie Key Panels are 'matrix-free' IP network intercom system. It is also designed to be used in conjunction with
Genie Base Station, an integrated system of IP intercoms and wireless Beltpacks. The Key Panels provide various
audio paths such as the peer-to-peer communication paths and group key, interoperation with Genie group
channels, Line (4-Wire or 2-Wire) connections, Line audio routings and configuring IFBs. By the interoperation
between Genie wireless devices and Key Panels, the system provides an integrated 'matrix-free' IP networking
intercom solution that comprises Ethernet Beltpacks, Wireless devices and Key Panels.
See Genie Key Panel User Manual.
1.1 System overview
⚫Ethernet synchronization is applied between devices connected to the Ethernet, avoiding RF interference,
packet loss, delay, and jitter among all devices being connected to the Ethernet.
⚫The GCMV2 (Genie Configuration Manager-Version2) enables setting and pairing, as well as monitoring each
device's frequency data spectrum, links and battery status.
Base Station BS1000
⚫System configured by Base Station BS1000 + Remote Antenna RA100DW or RA100 + Ethernet Beltpack
IBP10 + Wireless Beltpack BP850 or BP851 + Repeater RBS85.
One Base Station (Genie Solo) offer up to 60 Genie devices (Ethernet Beltpacks, Remote Antennas, Repeaters)
and 128 wireless Beltpacks simultaneously. Up to six Remote Antennas (RA100DW, RA100) can be connected
to each Base Station. And, up to 128 wireless Beltpacks and, 10 Ethernet Beltpacks or Repeaters can be
connected to one Remote Antenna.
One Remote Antenna supports 10 Talk and 128 Listen paths. Even while multiple Talk channels of a device
such as Ethernet Beltpack are in active, it only occupies one Talk path. Thus, one Base Station with six Remote
Antennas offers up to 70 Talk paths for the wireless and Ethernet devices. However, for an instant, while the
Ethernet Beltpack is talking with two Base Stations simultaneously, it occupies two Talk paths.
⚫With the configuration of three Base Stations (Genie Trio), you can increase these audio paths.
Base Station BS850
Base Stations BS1000 and BS850 have different connection capacities. The Remote Antenna is connected up to
six to the BS1000, and up to three to the BS850.
⚫One Base Station BS850 (Genie Solo) offer up to 30 Genie devices (Ethernet Beltpacks, Remote Antennas,
Repeaters) and 128 wireless Beltpacks simultaneously.
⚫With the configuration of three Base Stations (Genie Trio), you can increase these audio paths.

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 7
Genie devices
Model
Description
Talk key
4W or 2W
Lines
4W
Lines
Daisy-chain
PoE
PoE In
Relay
OPTO
Input
Multi-
Sync
Power
Redundancy
BS1000
Base Station
8
2
2
2
1
2
2
O
(2xPSU)+PoE
BS850
Base Station
1
2
O
PSU
RA100DW
Remote Antenna
Daisy-chain, IP53 sealing
2
1
PSU+PoE
RA100
Remote Antenna
1
PoE
RBS85
Repeater
1
PoE
BP850(851)
Wireless Beltpacks
2 (4*)
Battery
WR850
Wireless IFB Receiver
Battery
IBP10
Ethernet Beltpack
4
1
1
PoE
Key Panels
Model
Description
Talk
key
4-Wire
Daisy-chain
PoE
LAN
PoE In
Relay
Opto Input
Format
Power
Redundancy
GRP32
Rack Panel
32
4
2
1
2
2
2RU
(2xPSU)+PoE
GRP16
Rack Panel
16
4
2
1
2
2
1RU
(2xPSU)+PoE
GDP16
Desktop Panel
16
4
2
1
2
2
Desk/Wall
(2xPSU)+PoE
GRP8
Rack (Discontinued)
8
4
2
1
2
2
1RU
(2xPSU)+PoE
GRP8-12V
Rack Panel
8
4
2
1
2
2
1RU
(2xPSU)+PoE
GDP4
Desktop/Wall Panel
4
1
Desk/Wall
PoE
GLR4
Line Router
4
2
1
1RU
(2xPSU)+PoE
GWL
WAN Link
4
2
1
1RU
(2xPSU)+PoE
Talk keys of the Key Panel
Description
GRP32
GRP16/GDP16
GRP8-12V
GDP4
Talk keys
32
16
8
4
Shift keys
16
8
X
Pages
4
4
4
X
Talk channels in one Group key
20
20
20
20
Genie system capacity
Description
Base Station BS1000
Base Station BS850
Remote Antenna RA100
Repeater RBS85
Connections of Remote Antenna RA100
6
3
Connections of Repeater RBS85
60 (6 Remote Antenna)
30 (3 Remote Antenna)
10
Connections of wireless Beltpack
(BP850, BP851)
128
128
128
128
Connections of Ethernet Beltpack IBP10
120(6 Remote Antenna)
60 (3 Remote Antenna)
20
Talk paths
70 (6 Remote Antenna
40 (3 Remote Antenna
10
10 with RA100
Listen paths
Min 128
Min 128
Min 128
Min 128
Description
Connections
Recommended multiple Base Stations
Up to 5
Base Stations paired with BP850,BP851
Up to 5
Base Stations paired with IBP10
Up to 2
Genie main features
LaON’s patent-technology based Genie offers the best audio quality with an excellent clarity by using 5GHz UNII
band and RF interference avoidance technologies. It guarantees the system stability even in large site
environments where various A/V and wireless equipment are co-located. Highly scalable Ethernet-based Remote
Antenna RA100DW can transmit power and audio data. With the deployment of the multiple Remote Antennas
and Repeaters, the antenna coverage area can amazingly be extended.
⚫Converged intercom system: Hybrid IP intercoms and wireless Beltpacks on one Base Station
One Base Station, with wireless Beltpacks, Ethernet Beltpacks, Ethernet Beltpacks and Genie Key Panels.
⚫License-free 5GHz UNII BAND
5GHz UNII Band, the worldwide license-free frequency band provides up to 29 RF channels depending on the
regions as opposed to few RF channels on 2.4GHz ISM band. Therefore, users can enjoy pleasant wireless
communications with even less traffics or RF interferences. With the advantages of high frequency band, the
system is also hardly affected by high-power digital equipment such as amplifiers and speakers.
⚫Super-scalable Ethernet Remote Antenna(RA100DW or RA100) and Repeater(RBS85) solutions
Remote Antennas and Repeaters dramatically increase antenna coverage areas. Using standard LAN network,
you can easily integrate multiple studios or floors by adding a Remote Antenna or Repeater to each antenna
coverage area. Base Station BS1000 and Remote Antenna RA100DW provide PoE for an efficient power supply.
Automatic roaming is available between a Base Station, Remote Antennas and Repeaters. Up to 128 wireless
Beltpacks and, 22 Ethernet Beltpacks or Key Panels can be connected to one Remote Antenna. Up to 10
Repeaters can be connected to one Remote Antenna.

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 8
⚫Ten Talk paths and unrestricted Listen paths per Base Station or Remote Antenna
Each Base Station or Remote Antenna provides 10 additional Talk paths and unrestricted Listen paths.
Therefore, one Base Station BS1000 with six Remote Antennas provides up to 70 Talk paths and unrestricted
Listen paths for the wireless Beltpacks or Genie IP devices.
⚫128 wireless Beltpacks connect to any Genie Antenna device
The 128 wireless Beltpacks connect to any Genie Antenna device (such as the Base Station, Remote Antenna,
Repeater) without limitation.
⚫Ethernet synchronizations
Ethernet synchronization avoids RF interference, packet loss, delay, and jitter between devices. Ethernet
synchronization applies to all Genie devices which are connected on the Ethernet.
⚫Industry-top level audio quality
23ms low latency and 7.2KHz audio bandwidth ensure high-quality audio performance.
⚫Five Genie group channels on the wireless Beltpack
Five Genie group channels can be set to the wireless Beltpack. Each Genie group channel can be selected to
open the talk/listen path. The simultaneous talk/listen function also provides, there are four simultaneous Genie
group channels for the BP851, two simultaneous Genie group channels for the BP850. These features provide
level control for each Genie group channel.
⚫Wireless Beltpack in Master mode
One of all wireless Beltpacks can be set as a Master Beltpack. 128 Wireless Beltpacks can communicate using this
Master Beltpack without a Base Station.
⚫Line interfaces: 4-Wire, 2-Wire and auxiliary I/O
Line input and output ports are provided to secure seamless connections with wired intercom systems, external
audio devices etc.
⚫GCMV2 (Genie Configuration Manager) for setting and monitoring
With GCMV2, users can pair and set each device over the Ethernet connection and monitor the connectivity
status of each device. In the monitoring function, the battery and microphone level of the wireless Beltpacks,
and the RSSI (Received Signal Strength Indication) of each Antenna in its place are displayed.
⚫Top security with AES 256 bits level 3 encryption
Confidential communication is secured with AES 256-bit level 3, highest encryption technology.
⚫Various options on battery
Either LaON provided rechargeable battery pack or AA type Alkaline battery with LaON designated battery Sled
can be used for supplying power to the Beltpack. Also, commercial rechargeable battery which meets the
specification can be used with the LaON provided battery Sled.
⚫Efficient 7 or 8 ports chargers
The BATCHG125 charger has five bays that can charge the Beltpack with the battery pack inserted. And, there
are 2 bays for charging the battery pack BAT50. The BATCHG225 charger provides eight bays for charging
battery packs and eight storages.
⚫Compact design
A compact Beltpack with internal antennas supports high level of mobility with a comfortable headset during
harsh broadcasting and event operations.
⚫LaON In-house technologies and solutions
LaON has developed all LaON intercom systems by using its own wireless SoC and patent-based technologies.
Based on its know-how and comprehensive experience, LaON is able to offer various communication solutions
as well as flexible and timely service for customer satisfactions with a top priority.

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 9
1.2 Example of using Genie system
Using Remote Antennas and Repeaters
⚫Three or six Remote Antennas can be connected to each Base Station. And up to ten Repeaters (or 22 Ethernet
Beltpacks, Key Panels for wireless connection) can be connected to one Remote Antenna. With the industry
standard LAN network configuration, multiple studios or multi-floor sites can be easily consolidated.
⚫Base Station BS1000 and Remote Antenna RA100DW provide very efficient functions such as PoE and Daisy-
chain connections. The Remote Antenna RA100 does not provide Daisy-chain connections.
⚫128 wireless Beltpacks can roam freely between antenna coverage zones.
⚫The system allows various types of network connections such as fiber-optic cable, PoE and Daisy-chain.
⚫Redundant system and WAN solutions are available.
Example of Genie system configuration
Genie System Configuration with wireless Beltpack and IFB receiver
Genie System Configuration with Key Panels

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 10
Base Station BS1000
⚫Using one Base Station BS1000, it consists of 6 Remote Antennas (RA100DW or RA100) + 128 Ethernet
Beltpack IBP10s or Key Panels (or 60 Repeater RBS85s) + 128 wireless Beltpack BP850s.
Ten Talk paths added per Remote Antenna.
A Remote antenna can be configured 22 Ethernet Beltpacks or 22 Key
Panels or 10 Repeaters within 22 devices. In addition, 128 wireless
Beltpacks can be connected to a Remote Antenna.
Star, tree or Daisy-chain topologies
10 Talk and
128 Listen paths
Key Panel
Key Panel
Key Panel

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 11
Base Station BS850
⚫Using one Base Station BS850, it consists of 3 Remote Antennas (RA100DW or RA100) + 66 Ethernet Beltpack
IBP10s or Key Panels (or 30 Repeater RBS85s) + 128 wireless Beltpack BP850s.
Genie Trio system
You can configure Genie Duo with 2 Base Stations and Genie Trio with 3. Up to five Base Stations can be
connected to configure. This configuration allows wired and wireless connectivity Genie devices to be used more
than twice as much.
Star, tree or Daisy-chain ring topologies
10 talk and
128 listen paths
Key Panel
Key Panel
Ten Talk paths added per Remote Antenna.
A Remote antenna can be configured 22 Ethernet Beltpacks or 22 Key
Panels or 10 Repeaters within 22 devices. In addition, 128 wireless
Beltpacks can be connected to a Remote Antenna.
Key Panel

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 12
Multi-Sync connections for Ethernet synchronizations
Genie is designed to use multiple Base Stations, Remote Antennas and Repeaters in one antenna coverage area.
Multi-Sync connections between Base Stations are required for the smooth coexistence of these Genie devices.
Wireless Beltpacks can be used by selecting a Base Station. This configuration allows wired and wireless
connectivity Genie devices to be used more than twice as much.
Genie Connections
Genie devices can be connected in several different ways.
Daisy-chain ring configuration (Power and data redundancy)
Multi-sync Connection
BS1000, RA100DW Power and data redundancy: 48VDC, PoE In and Daisy-chain ring connection.
IBP10 Power and data redundancy: Daisy-chain ring connection.
Key Panel

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 13
Configures a redundancy system (This has been applied to BS1000 version V4030)
The redundancy system consists of a redundancy setting and a Genie Duo system and daisy chain ring
connection. One Base Station BS1000 or Remote Antenna in monitoring mode monitors for failure of another
Base Station or Remote Antenna. When a fault occurs, it automatically changes from monitoring mode to normal
operating mode.
WAN connections
WAN Links establish a robust mesh network when transporting audio. Six WAN Links can be connected to any
other WAN Link. Communication is possible between the wireless Beltpacks of Base Stations connected to the
Line (4-Wire) of each WAN Link. Peer to Peer communication is also possible between the Key Panel connected
to any WAN Link.
For more information, see WAN Link User Manual.
Intercom Systems (Matrix etc.)
4-Wire
. . .
. . .
Key Panel
Key Panel
WAN, Internet
Mesh Network
WAN Link
WAN Link
WAN Link
WAN Link
WAN Link
WAN Link
WAN
Internet
Router
POE
Switch
WAN Link
Base Station
RA100
Base Station
RA100
WAN Link
Router
POE
Switch
Key Panel
Key Panel
Typical WAN connections
LAN
4-Wire
PoE

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 14
Genie group channels (Conference mode)
⚫Single or multiple Genie group channels up to five can be allocated flexibly to each device.
⚫Since the Genie group channels can be allocated to the 4-Wire and auxiliary devices, a system supports various
communication ways such as IFB as well as IC and ISO.
⚫Wireless Beltpack users can communicate with two (BP850) or four (BP851) Genie group channels at the same time. It
also provides the function of the Talk to All.
IFB and IC/ISO communications in one system
With the GCMV2 setting of the Base Station BS1000, you can specify the IFB group channel and dim level of the
Program audio (Program input). With this setting on the BS1000, when an IFB path is created on a Genie group
channel set as the Program audio, the Program audio is dimmed and mixed with IFB audio. With this function, the
wireless Beltpack may be used as the IFB caller or destination. You can also apply IFB to set up to send Line input
audio back to Line output. (This has been applied to BS1000 version V4030)
With this feature of Genie, you can conveniently use the wireless IFB receiver as an IFB destination
System usage of the stand-alone operation
You can use the MS150 Mobile Station or Base Station (BS1000, BS850) to form an independent IFB system.
When using the MS150, the function to adjust the program audio dim (or Mute) when an IFB path is created on a
Genie group channel set to Program audio is not provided, but an external microphone can be connected to the
MS150.
Single or multiple or all groups can be allocated
group 1
group 2
group 3
group 4
group 5
group 1,2
group 2,3
group 3,4
group 1,2,3,4
group 1
group 2,3
group 2,3,4
group 1,2,3,4
group 1,2,3,4,5
4-Wire Devices
BS Headset
…
Key Panels
MS150
Mobile station
Wireless Beltpack
…
Wireless
IFB Receiver
Group 1, dimmed by
IFB
Group 1,
dimmed by IFB
Line B: IC Source
Group 2
Line A, Program input
IC/ISO: Group 2, 3
IFB destination
IFB caller
Group 1
IFB
Talk path
Program Input
Key Panels
IFB caller and
destination

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 15
System usage with Line devices
Master Beltpack (MB) mode
⚫A Master Beltpack mode consists of only wireless Beltpacks. Only one of the Beltpacks is set as the master and provides
the coverage area for other Beltpacks
⚫A Master Beltpack mode provides a group channel with five Talk and 128 Listen paths (1 MB + 4 BPs).
⚫Beltpacks can roam between Base Station and the Master Beltpack installed in a separate coverage zone.
Stand-alone operation in each Antenna coverage zone
Note: Do not use Base Station and Master Beltpack(MB) in one Antenna coverage zone. That would automatically
connect the Beltpack to an Antenna with stronger radio waves, causing confusion in operation.
2-Wire
(group#3)
4-Wire
(group#1)
4-Wire
(group#2)
2-Wire
(group#4)
4-Wire
(group#5)
Line devices
Walkie-talkie
Relay Pin,
AUX D
Line Router
4-Wires
(To Panels or BS)
Panels
Beltpack is set to Base Station's Group channel 1 and allows automatic or manual roaming between Base Station
and Master Beltpack.
Master Beltpack (MB)

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 16
Section 2: Product overview
2.1 Genie equipment
Base Station BS1000 equipment
➢Rear panel: 2 Antennas, 4 Lines (4-Wires with 2 x 2-Wires and null control), 2 Multi-Sync, SA, 2 Relays and 2 Opto-
isolated inputs, I/O with 12VDC, PC Programming (Firmware), PoE In, 2 Daisy-chain ring PoE Lines (PoE standard
power and data), 2 Power input 48VDC
➢Front panel: Power switch, loudspeaker, gooseneck Mic, Headset connector (6pin Mini-Din Receptacle) Master
Volume with Push to Select, SPKR/Mic/RMK/TTA/ SA and Menu buttons, 8 Talk keys, 8 Volumes with push to call,
2 OLED displays
➢Power and data redundancy: 2 x 48VDC, PoE In and Daisy-chain ring connection
Note: It is recommended to connect the ground wire from the chassis ground screw to earth ground.
Base Station BS850 equipment
➢Rear panel: 2 Antennas, Line (4-Wire), AUX I/O, Multi-Sync, LAN, 8ohm Speaker, Power switch
➢Front panel: Talk key, 4-Wire enable button, AUX enable button, Select Group buttons, Call button,
Set/Up/Down/Left/Right buttons, Headset connector (6pin Mini-Din Receptacle), OLED display
Note: It is recommended to connect the ground wire from the chassis ground screw to earth ground.
48-56VDC 2.5A Power Supply
(One moreis availableas anoption)
Base Station Antenna
Base Station Antenna
11.4-12.6VDC 3.33A
Power supply
10 pin spring clamp Connector
1RU Rack mount kit,
BRK550 (Optional)
Base Station
LaON LT850
C

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 17
Remote Antenna RA100DW equipment
⚫Can be configured with Base Stations BS850 or BS1000.
⚫IP53 sealing (Dust + water spray at up to 60°from vertical) and antennas are mounted internally.
(IP65 sealing when fixing the power rubber cap with waterproof adhesive)
⚫Power and data redundancy: 48VDC, PoE Input and Daisy-chain ring connection.
➢PoE Input (1Gbps/100Mbps), 2 Daisy-chain ring PoE Lines (PoE standard power and data), 48VDC, Multi-Sync
➢Install them on the wall or camera tripod or microphone/light stand with interfacing screws, M6 and Kensington lock
Remote Antenna RA100 equipment
⚫Can be configured with Base Stations BS850 or BS1000.
➢PoE Input
Repeater RBS85 equipment
⚫Can be configured with Remote Antenna RA100DW or RA100.
➢PoE Input
Remote Antenna and Repeater holder: Insert a RA100 and fix it with a screw on the holder. Connect the LAN
cable by using the ‘Push-Pull Locking’ type EtherCON connector on the bottom of the holder. Install them on the
wall or camera tripod or microphone/light stand with interfacing screws.
48-56VDC 2.5A Power Supply (optional)
Waterproof RJ45 plug x 3
Remote antenna RA100DW
RA100
Remote antenna
RHD1000
Remote antenna holder
(Optional)
Antennas
RBS85 Repeater
RHD1000
Repeater holder
(Optional)
Antennas

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 18
Ethernet Beltpack IBP10 equipment
⚫Can be configured with Base Station BS850 or BS1000 through the Remote Antenna.
⚫Power and data redundancy: Daisy-chain ring connection.
➢Two Daisy-chain ring PoE Lines (PoE standard power and data), Headset connector (6pin Mini-Din Receptacle),
3.5Ø TRS Headset connector
➢OLED display, 4 Talk keys, 2 x Volume buttons (Channel shift), 2 x Volume Shift, Menu button, Call button
Wireless Beltpack BP850 (2 channels), BP851 (4 channels) equipment
⚫Can be configured with Base Station (BS850, BS1000) or Remote Antenna or Repeater
⚫Optional IP65 sealing (Adopting IP67 waterproof headset connector.)
Wireless IFB Receiver WR850 equipment
Connects to a base station (BS850, BS1000), remote antenna, repeater, or mobile station (MS150).
4 Talk keys
Select channel volume
Menu
Call
2 x Daisy-chain Lines
TRS Headset, Headset
Volume up/down
Shift channel
BAT50: 2450mAH, ~500 cycles
Rechargeable Battery Pack (Optional)
BP850, BP851 Beltpack
Battery sled
BPPCH100
Beltpack Pouch (Optional)
BAT50: 2450mAH, ~500 cycles
Rechargeable Battery Pack (Optional)
IFB receiver WR850
Battery sled

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 19
Battery charger equipment
Headset and microphone
15VDC 8A Power Supply
BATCHG225 Battery Charger
BATCHG125 Battery Charger
LSH-S125D (Dynamic)
LMH-125D (Dynamic)
LNH-20D (Neckband, Dynamic)
LMH-10 (Dynamic)
PTE-850 (Electret)
GM8 (7.5inch, Electret)
GM26 (Telescoping 17.5~26inch, Electret)
LME-880 (Earphone)

ⓒ2020 LaON Technology Co., Ltd. All rights reserved. 20
2.2 Menu maps
Genie Configuration Manager-Version 2 (GCMV2)
Menu
Setting window
Descriptions
Pairing
128 channel Key Panels and all Genie devices
Set and pairing
Monitoring
128 channel Key Panels and all Genie devices
Monitoring, Change some settings
Base Station BS1000 menu
Normal menu
Main menu
Sub menu and Screen 2
Display four
Group labels.
Each Channel
Listen level
Screen 2: Display Base Station’s label, Radio Tx on/off status, Master/Slave
status, Model, firmware version, Paired date
Set Gains:
Setting the levels
GN Mic: Gooseneck microphone level
HS Mic: Headset microphone level
SA: Stage announce level
A In: Line A input level
A Out: Line A output level
B In: Line B input level
B Out: Line B output level
C In: Line C input level
C Out: Line C output level
D In: Line D input level
D Out: Line D output level
Pair Belt: Pairing the Beltpack
Edit Beltpack label, groups. Pair Beltpacks to the Base Station.
Set Base:
Set the Base Station
BS1000
GN ELECT DYN: Select gooseneck Mic as Electret or Dynamic
Call Tone On Off: Enable or disable call tone.
LowCut Off -3 -6: Reduce the low frequency -3dB or -6dB.
VOX Level #: Set the VOX level.
Latched Talk
1 2 3 4 5 6 7 8: Set the latched Talk channels.
Sidetone Option
Track Non-Track: Set sidetone Tracking or non-tracking
A 4-Wire 2-Wire:
B 4-Wire 2-Wire: Select the type of Line A and Line B to 4-Wire or 2-Wire.
Screen Save ###: Setting the display off time period, Range: 10~900 minute
RF-TX On Off: Enable or disable radio transmission
Indoor-RF On Off: Enable or disable Indoor radio
Multi-BS MST SLV: Set as Master or Slave Base Station
Redundant #: Enable or disable redundancy system.
A G12345
B G12345
C G12345
D G12345: Set a Group or Groups for Line A, B, C, and D.
OPTO1 T12345678: Assign the Opto1 input to Talk channels.
OPTO2 T12345678: Assign the Opto2 input to Talk channels.
Relay1 T12345678)
Relay2 T12345678: (This has been applied to BS1000 version V3516)
Set Relay1 or Relay2 to Talk key.
T1 G12345 ABCD
T2 G12345 ABCD
T3 G12345 ABCD
T4 G12345 ABCD
T5 G12345 ABCD
T6 G12345 ABCDR
T7 G12345 ABCDR
T8 G12345 ABCDR: Set the Talk channels
G1 Label LaON001
G2 Label LaON002
G3 Label LaON003
G4 Label LaON004
G5 Label LaON005
A Label LaON006
B Label LaON007
C Label LaON008
D Label LaON008: Displays the labels for five Groups and four Lines.
Reset Belt Label
Reset Belt Label No Yes
Reset Belt Group
Reset Belt Group No Yes