Genie GPR816/12R User manual
Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
8A 16-Port 500mA DC12V
Rack Mount Regulated Power
Supply
GPR816/12R
Quick Start Guide 8A 16-Port 500mA DC12V Rack Mount Regulated Power Supply
2
The Genie GPR816/12R is a power supply in a 19” standard 1U rack, which can
transform AC120V or 230V to 16 ports of regulated DC12V 0.5A output. It’s a perfect
power supply for a number of cameras, housings, pan tilt turning devices or other
surveillance equipment.
Features
• Built-in NFB to avoid current overload
• Built-in PTC fuse for overcurrent and resettable protection on each port
• Built-in a fan at front and back panel to lower the operating temperature
Specifications
Dimensions
Support
Output Voltage DC12V (Regulated)
Output Current 0.5A/ Port
Output Trip Current 1A / Port
Short Cut Time 0.2 Sec/ Port
Cut Current / Time 2.5A/ 4Sec
Resettable Output / Time Auto/ 1 sec (Min)
Total Output Current 8A (Max)
Ports &
Interfaces
Power Input 1 x Power Core
Power Output 16 × 2-pin Terminal Block
Others
Temperature
Operating: -10 to 45°C
Storage: -30 to 70°C
Humidity: Up to 95%
Dimensions 437 × 170 × 44mm
Weight 4000g
170mm
190mm
483mm
POWER
AC 230V
AC 120V
910 11 12 13 14 15 16
8
7
6
5
4
3
2
1
DC 12V
OUT
44mm
Quick Start Guide 8A 16-Port 500mA DC12V Rack Mount Regulated Power Supply
3
Installation View
Caution for Operation
1. GPR816/12R has a built-in short protection circuit, the device will open while
it is in short condition. Please check the system to find out what caused short.
After the problem has been solved, reset the power switch and then the system
will operate properly.
2. GPR816/12R has a built-in resettable fuse on each port. The device will open
while it is in short condition. Please check the system to find out what caused
short and solve it. The device will auto reset after the system is recovered.
Caution:
Connect only one device to one port, never connect one device to two different
ports, or it will lose protection. (See below drawing).
Front
Back Camera Housing Scanner
