Genius Ergo 9000 User manual

English
1
Ergo 9000
User Manual
Model No.: GM-100010/T

English
2
Hardware Installation
Note: Supports Windows 7/Vista/XP
1. You can connect the receiver to a USB port of a PC.
2. Install two AAA batteries in the mouse.
3. Make sure that you have switched on the power switch underneath the
mouse.
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of
glass or mirror.
2. The connection of the wireless device is factory preset, so when you
plug the USB receiver into any USB port, the connection between the
micro receiver and the mouse will be established automatically.
3. In case your PC did not install the hardware successfully, remove the
micro receiver from the USB port and go Human Interface Devices
under Device Manager to remove the mouse then plug in the micro
receiver to a USB port again.
4. If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them.
Remember to put the batteries in the correct direction.
Factory Settings
1. Left Button: Provides traditional mouse functions like click, double
click and drag.
2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and
Windows documents.
3. Right Button: Provides traditional mouse click functions.

English
3
Note: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment. (15.21)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.(15.19(a)(3))