Genki GK-1200 User manual

GK-1200 | User Manual

GENKIPWR GK-1200
DISCLAIMER
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Users take full
responsibility for all usage and operations. Familiarize yourself with the related regulations in
your area. You are solely responsible for being aware of all relevant regulations and using
GENKIPWR products in a way that is compliant.

1
4
5
6
6
7
7
8
9
10
10
3.1 Product Introduction
3.2 Product Details
3.3 LCD Screen
3.4 Display Attention
3.5 UPS Mode
3.6 Solar Panel Connection
3.7 Car Charging
1.
2. Safety Instructions
3. Getting Staed
4. FAQs
5. What’s in the Box
6. Storage & Maintenance
CONTENTS
Specications
2
3
2.1 Usage
2.2 Disposal Guide

1
1. Specications
Input Pos
AC Charge
AC Input Voltage
Solar Charger
Car Charger
Rabbit Fast Charge 700W Max
220-240V~ 50Hz/60Hz
11.5-50V 12A, 500W Max
120W, 10A
Max Device(s) Power Suppoed by X-Boost
USB-A (x2)
Tybe-C-C1 (x3)
Tybe-C-C2(x1)
Car Charger(x1)
DC Output (x2)
1800W (Constant power)
5V 2.4A, per po
20W Max, per po
100W Max
12V 10A
12V 3A, per po
General Info
Output Pos
Net Weight
Dimensions
Capacity
Approximately 27.6lbs (12.5kg)
15.4in x 9.1in x 12.6in(39 x 23 x 32 cm)
960Wh 48V
Batte Info
Cell Chemist
Cycle Life
LiFePO4
3500 cycles to 80%+ capacity
AC (x2) Pure Sine Wave, 1200W total (Surge 2400W),
100V-120V（US、JP）/220-240V (EU) / 50Hz/60Hz
Environmental Operating Temperature
Optimal Operating Temperature
Discharge Temperature
Charge Temperature
Storage Temperature
* Whether the product can be charged or discharged depends on the actual temp erature of the batte pack.
20°C~30°C (68°F~86°F)
-10°C~60°C (14°F~140°F)
0°C~55°C (32°F~131°F)
-20°C~45°C(-4°F~113°F)
(optimal: 20°C~30°C(68°F~86°F))
Protection
Over Voltage Protection, Overload Protection, Over
Temperature Protection, Sho Circuit Protection,
Low Temperature Protection, Low Voltage Protection,
Overcurrent Protection

2. Safety Instructions
1. Do not use the product near a heat source, such as a re source or a heating furnace.
2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the product in
rain or humid environments.
3. Do not use the product in an environment with strong static electricity/magnetic elds.
4. Do not disassemble the product in any way or pierce the product with sharp objects.
5. Avoid using wires or other metal objects that may result in a sho circuit.
6. Do not use unocial components or accessories. If you need to replace any components or accessories,
please visit ocial GENKIPWR channels to check relevant information.
7. When using the product, please strictly follow the operating environment temperature specied in this user
manual. If the temperature is too high, it may result in a re or explosion; if the temperature is too low, the
product peormance may be severely reduced, or the product may cease to work.
8. Do not stack any heavy objects on the product.
9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external impact,
turn o the power supply immediately and stop using the product. Ensure the product is well fastened
during transpoation to avoid vibrations and impacts.
11. If you accidentally drop the product into water during use, please place it in a safe open area, and stay
away from it until it is completely d. The dried product should not be used again, and should be properly
disposed of according to Section 2.2 below. If the product catches re, we recommend that you use the re
extinguishers in the following order: water or water mist, sand, re blanket, d powder, and nally a carbon
dioxide re extinguisher.
12. Use a d cloth to clean o di on the product pos.
13. Rest the product on a at suace to avoid damages caused by the product falling over. If the product is
oveurned and severely damaged, turn it o immediately, place the batte in an open area, keep it away
from combustible matter and people, and dispose of it in accordance with local laws and regulations.
14. Ensure that the product is kept out of reach of children and pets.
15. Store the product in a d and ventilated place.
16. It is recommended to use moisture barrier bags in wet environments (for example, places by the sea or
waterways) to prevent the product from getting soaked. If water is found inside the product, it must not
be used or turned on again. Please take anti-eletric shock measures before touching the product. Following
this, place the product in a safe, waterproof and open area. Once complete contact GENKIPWR Customer
Seice immediately.
17. This product is not recommended for powering medical emergency equipment related to personal safety,
including but not limited to medical grade ventilators (hospital version CPAP: Continuous Positive Airway
Pressure ), aicial lungs ( ECMO, Extracorporeal Membrane ) Please follow your doctor's instructions and
consult with the manufacturer for restrictions on the use of the equipment. If used for general medical
2.1 Usage

2.2 Disposal Guide
1. If conditions permit, make sure that the batte is fully discharged before disposing it in a designated
batte recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly
prohibited to dispose of it in ordina trash cans. For more details, please follow the local laws and
regulations on batte recycling and disposal.
2. If the batte cannot be fully discharged due to a product failure, please do not dispose of the batte
directly in the batte recycling box. In such case, you should contact a professional batte recycling
company for fuher processing.
3. Please dispose of over-discharged batteries that cannot be recharged.
equipment, please be sure to monitor the power status to ensure that the power does not run out.
18. When in use, power supply products will generate electromagnetic elds, which are likely to aect the
normal operation of medical implants or personal medical equipment such as pacemakers, cochlear
implants, hearing aids, debrillators etc. If these types of medical equipment are being used, please contact
the manufacturer to inquire about any restrictions on the use of such equipment. These measures are
fundamental to ensure a safe distance between the medical implants (for example, pacemakers, cochlear
implants, hearing aids, debrillators etc.) and this product while in use.

4
3.1 Product introduction
3.2 Product Details
3. Getting Staed
① Main power control
② Light control
③ USB control
④ DC control
⑤ LCD display
⑥ Air intake/outlet
⑦ AC on/o control
(50Hz/60Hz switching )
⑧ XT60 input po
(for solar panel)
⑨ AC input po
⑩ Overload protection
①
②
⑥⑥
⑦
⑧
⑨
⑩
③
④
⑤
This product is a 960Wh large capacity 1200W high power, 1.5 hours of high-speed charging poable energy
storage power supply, using high safety peormance of LiFePO4 batte.
It can be used as a backup power supply in case of emergency powercut,disaster, camping and vehicles, and can
also provide power for various electric tools.
1200W high power, pure sine wave AC output, can be used for house-hold appliances such as ders, microwave
ovens, refrigerators,high-power induction cookers and it can also be used for other electronic devices such as
personal computers.
Through the 700W ultra-fast charging,this model can be full charged within 1.5 hours, The AC input/output
voltage frequency can automatic or manually switched between 50Hz/60Hz.This product also suppos maximum
500W solar charging and allow you to charge even when the power cut or in outdoor situations.

5
① Main Power Control
Main Control for the whole system turn on/o.
Operate method: long press the button for 3s to turn on/o the system.
② LED light control
Operate method: sho press to turn on and change the light mode(SOS/Flash).
Notice: you can turn o the light by long press the button(1-2s) in any mode.
③ USB button
Operate method:sho press to turn on/o.
④ DC button
Operate method:sho press to turn on/o.
⑤ LCD display
Present the remaining power and using data.
⑥ Cooling system
When the fans are working, please don't block the channel.
⑦ AC button(AC output, total share 1200W)
Operate method: sho press to turn on/o.Notice:
1.Please conrm the output voltage or frequency before using
2.Long press the button for 3s to ent the frequency changing mode, 50Hz and 60Hz will blink in the display,
press again the button to choose the right frequency. Wait till the frequency is not blinking, then you will get the
frequency you want.
3.Quick sho press for 10 times to switch the voltage 220V or 230V.
⑧ Solar panel input
Use the included XT60-MC4 conversion cable to connect the solar panel.
1.Solar panels can have a maximum input of 500W and a maximum voltage of 50V.
2.If exceeding the maximum voltage leads to equipment damage, it is beyond the scope of warranty.
⑨ AC input po
Use wall socket to get 700W fast charging, which can full charge from 0 to 100% in 1.5 hours.
*The product can be charged directly by the wall socket, please do not use extension cords and cable taps,
When the product is charging, do not plug other products in the same socket.
*Please do not plug several devices together in a extension socket at once, the current will be too high and
bring damage to the cable and re risk.
*Do not use the same socket to connect other devices when charging.

6
3.3 LCD Screen
3.4 Display Attention
①Charging/using time
②Fan state
③H/L temperature protection
④Power percentage
⑨Type-C output
⑩USB output
⑪AC charging
⑫ Solar Charging Input
⑬Type-C output
⑭Cigarlighter output
⑤Total input power
⑥Total output power
⑦LED light
⑧AC output
⑩ Overload protection
To protect this product, an overload protector is added. Prevent damage to the product due to
excessive AC input current caused by lightning and power grid uctuations. When such a
situation occurs, the overload protector will sta to cut o the AC input to protect the product
Restore the AC input function of the product in the following sequence.
1. Turn o the power button and unplug all pos.
2. After conrming that all pas are normal, turn on the power button.
When this icon lights up. Please keep Air intake/outlet unobstructed.
When this icon lights up. Please note the device is now with high/low temperature and will
possibly stop working till the temperature back to normal standard.
When this icon is blinking, represent that the AC input is fault,please recheck
(Power/Hz/cable).
When the icon is blinking, represent the output is fault, please recheck.

7
3.5 UPS mode
3.6 Solar panel connection
By solar panels
Our products can be connected to solar panels and can be charged through solar panels.
*Solar panel charging power refer to the weather and climate condition locally.
*The PV voltage exceeding 50V will damage the GENKIPWR and it will break warranty condition.
Connecting Pattern ①
UPS Connections
As shown in the gure below, connect the product between the socket on the wall and the electrical appliances,
and the power of the product is in the ON state. When you turn on the power of the electrical appliances, it will
directly uses the AC power of the power grid.
In this state, when the power grid is cut o, it will automatically switch to the product's internal batte to
supply power.
*In UPS mode of The United States and Japan, the maximum power output of AC is below 1100W, and the AC
output exceeds 1100W. The AC output icon “ ” blinks indicating overload.
*In UPS mode of the China, United Kingdom, Europe and South Korea , AC output of the maximum power below
1200W. AC output over 1200W, The AC output icon “ ” blinks indicating overload.
UPS function
GENKIPWR has the bypass mode, when charging, it directly supply power from AC to DC load without passing
through the batte, when grid is o it can switch to DC-DC automatically and allow batte to discharge power
to load continously within 10ms.
XT60 to MC4
Solar panel
Not included in the accesso

8
3.7 Car charging
This product can be charged by the cigarette lighter in the car with an ACC cable(accesso: ACC
hereinafter).
Turn on GENKIPWR, connect the ACC charging cable to the cigarette lighter in the
car and the XT60 inteace on the side of the product, turn on the engine of the car, and the
LCD of this product will show the input power.
*On-board charging should be carried out with the car engine turned on, lf the engine is not turned on, the
batte might run out.
*Car charging is usually low power of 90-120W, and the charging time will be long.If you need quick charge, it is
recommended to use the mains.
By solar panels
Connecting Pattern ②

4. FAQs
9
1.What batte does the product use?
It uses high-quality LiFePO4 batte.
2. What devices can the product's AC output po power?
With 1800W constant power, the product's AC output po can power most household appliances. Before you use
it, we recommend that you conrm the power of the appliances rst and ensure the power sum of all loaded
appliances is lower than the rated power.
3.How long can the product charge my devices?
The charging time is shown on the product's LCD Screen, which can be used to estimate the charging time of most
appliances with stable power usage.
4.How can I know if the product is charging?
When it's charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the charging
indicator icon begins to rotate with the remaining batte percentage and the input power shown on the centre of
the circle.
5.How to clean the product?
Please gently wipe it with a d, soft, clean cloth or paper towel.
6.How to store the product?
Before storing, please turn o the product rst, and then store it in a d, ventilated place at room temperature.
Do not place it near water sources. For long-term storage, please discharge the batte to 30% and recharge it to
60% eve three months to extend its batte life.
7.Can I bring GENKIPWR by air?
No.

5. What’s in the Box
10
GK-1200 AC Charging Cable
Car Charging Cable
User Manual
GK-1200 | User Manual
6. Storage & Maintenance
1. Ideally, use and store the product between 20°C to 30°C(68° to 86), and always keep it away from water,
intense heat, and sharp objects. Do not store in temperatures above 60°C(140°F) or below -10°C(14°F) for an
extended period.
2. Storing a batte with a low charge for a long period shoens its lifespan. This product mitigates the damage
by putting the batte into hibernation mode. To get the most out of the batte, make sure it is about 60% before
putting this product into long-term storage, and then once eve three months, discharge the batte to 30% and
recharge it back to 60%.
Solar Charging Cable