Genz Benz ECAB 112T User manual

·When ever possible, avoid exposure to extreme
weather conditions such as direct intense sunlight, or
sub-zero temperatures.
·Use a stiff bristle brush to remove dirt and dust from
carpeting.
·Only use a mild cleaner with a citrus or water base to
remove stains. Always test an inconspicuous area for dis-
coloration first.
·Never use solvents or lacquer base cleaners.
·Never expose any of the speaker components to di-
rect rain or liquids. If this occurs stop using the
equipment immediately and contact a qualified repair
consultant.
CARE & MAINTENANCE
WARNING:
Genz Benz enclosures are not designed to be suspended or
hung from any surface of the cabinet. This can only be
achieved with properly installed professional “flying hardware”
and installed by qualified rigging technician.
cab
S TAGE
A RRAY
M ONITORS
OWNER’S MANUAL
Proudly manufactured in the U.S.A.

ecab
Compact, dynamic, light-weight P.A. enclosure or monitor
featuring a 12” or 15” woofer and horn/tweeter.
ecab
ecab-112T 100W/200W 70-20K Hz 97 db
ecab-115T 150W/300W 55-20K Hz 99 db
Stage Array Monitors
SAM-12H 200W/400W 60-17K Hz 98 db
SAM-15H 300W/600W 50-16K Hz 99 db
* For the purpose of power amplifier selection, we recommend matchin
g
Stage Array Monitors
Our newly revised models are a low profile wedge which pro-
vide powerful response for varying monitor needs or up-front
sound reinforcement. Designed with a 60 degree angle, the
performer is given the greatest flexibility in stage placement
and projection, while keeping feedback to a minimum. The
conical waveguide provides excellent output and wide disper-
sion. These two models also feature stand adaptors for F.O.H.
use.
FEATURES:
·Quality hand-built craftsmanship.
·Durable light-weight construction.
·Computer designed venting for precision performance and
durability.
·Attractive and durable black carpet.
·Black round perforated 18 gauge speaker grills.
·Classic designs and appearance.
·High output speaker and compression horn driver.
SET UP TIPS
·Always survey the area you wish to cover with your speaker
system to make sure that your system is adequately
matched for the venue.
·Use good judgment when placing your speakers for audience
coverage so that the speaker system will disperse over your
audience and not directly at ear level. (Remember, high fre-
quencies are absorbed much easier by people, curtains and other
soft materials; while low frequencies are not so easily absorbed)
·Always use good quality speaker cables and never use guitar
cables for hooking-up your speaker system.
·Important: Always use caution when connecting
speakers to an amplifier source. The power amp
should be off when making connections.
·Severe hearing loss is possible if subjected to ex-
tended durations of high-output sound levels.
·Always wear hearing protection whenever possible.
8 ohm 24 lbs. 18 1/2”x15 1/2”x13” 4K
8 ohm 33 lbs. 23” x 18” x 16” 2K
8 ohm 38 lbs. 23 1/2”x17 1/2”x12” 3.5K Hz
8 ohm 45 lbs. 25”x17 1/2”x14 1/2” 3.5K Hz
g
amplifier output ratin
g
s closets to the Peak Power Handlin
g
ratin
g
.