GeoMax Zenius800 User manual
GeoMax Zenius800 UniStrong UT30
Quick Guide
Version 1.0
GeoMax Zenius800 UniStrong UT30
Quick Guide
Version 1.0
English
1 Important Information about your
Instrument
Read and follow the UniStrong UT30 Quick Start Guide before using the
product or the accessories delivered with the product.
Keep for future reference!
This device is restricted to indoor use where operated in the European
Community using frequency in 5150 MHz ~ 5250 MHz to reduce the poten-
tial for interference. Restriction in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR,
HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK.
Do not change antenna types, just only allowed to use Original configura-
tion antenna (FPC).
☞
Notice
Notice
Important Information about your Instrument 6
en
Use responsibly. Read all instructions and safety information before use to
avoid injury. The maximum operating ambient temperature of the equip-
ment is 55 °C.
Battery safety
Battery works at ambient temperatures ranging from −20 °C to 55 °C.
CAUTION: Risk of explosion if battery is replaced incorrectly. Replace with
the same or equivalent type of battery as recommended by the manufac-
turer. Dispose used batteries according to the instructions of the battery
manufacturer.
☞Charging temperature specifications is from 0 °C to 45 °C.
Charger safety
Place the device in an environment that has a normal room temperature
with good ventilation when charging. It is recommended to charge the
device in an environment with an ambient temperature that ranges from
5 °C to 40 °C.
Product safety
warnings
Important Information about your Instrument 7
en
Wi-Fi safety
Turn off Wi-Fi in areas where Wi-Fi use is prohibited or when it may cause
interference or danger, such as in aircrafts while flying.
Avoid damage to your hearing
Exposure to loud volumes from earphones and headphones over prolonged
periods can cause hearing loss.
Important Information about your Instrument 8
en
1.Some special places, such as airports, hospitals, gas stations and
other places, do not allow the use of electronic equipment. Please
comply with the rules and do not use this product in these places.
2.For your safety and the safety of others, please do not use this prod-
uct while driving a vehicle.
3.In order to avoid potential safety problems, do not put this product
near the airbag of the vehicle.
4.For your safety, please do not use this product during thunderstorms.
5.Although this product is waterproof, do not leave this product for long
periods of time in areas with water or moisture.
6.This product has an operating temperature range of −20 °C to +55 °C
and a storage temperature range of −40 °C to +70 °C. Extreme tem-
peratures can affect the performance of the device and service life.
7.Please use an original rechargeable lithium battery. Low-quality bat-
teries will affect the performance and service life of the device, and
may even have the danger of explosion.
8.Although the product has been tested to withstand harsh operating
environments, do not use the product in an improper manner.
9.Please do not disassemble this product. In case of failure, please send
to our authorised service centres to proceed with repairs.
10.After the device has reached the end of its service life, please discard
in a proper way to avoid environmental pollution.
Notice
Important Information about your Instrument 9
en
11.When replacing the battery or during the use of an external power
supply, shut down the device completely before removing the battery
or disconnecting the external power supply to prevent damage.
12.This product is a Class B product, which may cause radio interference.
The user may be required to take necessary preventive measures.
Important Information about your Instrument 10
en
1.This product uses a rechargeable lithium battery as a power source.
When the power is low, please charge the battery. To maintain battery
life, it is recommended to deplete the power of the battery before
charging.
2.When the battery charger is not in use, please remove it from the
power supply. Do not connect the charger to the battery for more than
one week. Excessive charging will shorten the battery life.
3.Temperature affects the battery charging limit. Therefore, the battery
may need to be cooled or warmed up before charging.
4.Please use the battery for its original intended purpose to prevent
short-circuiting the battery. A short circuit will occur when a conduc-
tive material connects the positive and negative terminals of the bat-
tery.
5.Do not use a battery that is damaged.
6.Placing the battery in extremely cold or hot places will lead to short-
ened battery life. Exposing the battery to extreme temperatures may
cause the phone to malfunction, even if the battery is fully charged.
7.Do not put the battery in a fire. Please discard the battery in a proper
manner or take the battery to a battery recycling station. Please dis-
pose waste batteries in accordance with local laws and regulations.
Battery instruc-
tions
Important Information about your Instrument 11
en
Importer
GeoMax AG
Espenstrasse 135
9443 Widnau SG
Switzerland
Phone: +41 71 447 17 00
Email: [email protected]
Manufacturer
Shenzhen UniStrong Science & Technology Co.,Ltd.
B Zone, No.4-4 Workshop Zhengcheng 2nd Road, Fuyong Street,Bao’an
District, Shenzhen City, Guangdong Province, P.R. China
The SAR limit of Europe is 2.0 W/kg. Device types UT30 has also been tes-
ted against this SAR limit. The highest SAR value reported under this
standard during product certification for use on the body is 0.977 W/kg.
This device was tested for typical body-worn operations with the back of
the handset kept 0.0 cm from the body. To maintain compliance with RF
exposure requirements, use accessories that maintain a 0.0 cm separation
Importer,
Manufacturer
SAR information
Important Information about your Instrument 12
en
distance between the body of the user and the back of the handset. The
use of belt clips, holsters and similar accessories should not contain metal-
lic components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with RF exposure requirements, and
should be avoided.
Temperature Value
Working temperature −20 °C to +55 °C
Storage temperature −40 °C to +70 °C
Charging temperature Charging mode need to operate
indoors, please pay attention to
the environment temperature:
0 °C to +45 °C
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCOR-
RECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUC-
TIONS.
•This device complies with Part 22, 24 and Part 27 of the FCC Rules.
Conformity to
national regula-
tions
Important Information about your Instrument 13
en
•Hereby, Shenzhen UniStrong Science & Technology Co.,Ltd.
declares that the radio equipment type UT30 is in compliance with
the Directive 2014/53/EU. The full text of the EU declaration of con-
formity is available at the following internet address: http://
en.unistrong.com/declaration.html.
The SAR limit of FCC and ISED is 1.6 W/kg averaged over one gram of tis-
sue. Device types UT30 ( FCC ID:2AOPD-UT30 and IC: 11546A-UT30 ) has
also been tested against this SAR limit. The highest SAR value reported
under this standard during product certification for use at the ear is
0.702 W/kg and when properly worn on the body is 1.305 W/kg. This
device was tested for typical body-worn operations with the back of the
handset kept 1 cm from the body. To maintain compliance with FCC and
ISED RF exposure requirements, use accessories that maintain a 1 cm sep-
aration distance between the body of the user and the back of the handset.
The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC and ISED RF exposure
requirements, and should be avoided.
SAR information
Important Information about your Instrument 14
en
WARNING
This Class [B] digital apparatus complies with Canadian ICES -003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB -
003 du Canada.
RF mode and power tune-up refer to the UniStrong UT30 Quick Start
Guide Appendix A.
Canada Compliance Statement
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including inter-
ference that may cause undesired operation.
Canada Déclaration de Conformité
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes:
1.l'appareil ne doit pas produire de brouillage, et
Important Information about your Instrument 15
en
2.l'utilisateur de l'appareil doit accepter tout brouillage radioélectri-
que subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
Changes or modifications made to this equipment not expressly approved
by Shenzhen UniStrong Science & Technology Co.,Ltd. may void the FCC
authorisation to operate this equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accord-
ance with the instructions, may cause harmful interference to radio com-
munications.
Notice
Conformity to
national regula-
tions
Important Information about your Instrument 16
en
However, there is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
For RF mode and power tune-up, refer to Appendix A of UniStrong Quick
Start Guide.
Notice
Notice
Important Information about your Instrument 17
en
2 Instrument Components
d
c
b
a
19406_001
a Front camera
b Ambient light sen-
sor
c Microphone
d Keys
Front side of the
Zenius800
Instrument Components 18
en
i
h
g
f
e
d
c
b
a
19417_001
j
k
a Rear camera
b Camera flash
c External antenna
port
d Lock A for battery
compartment
e Lock B for battery
compartment
f Connector for USB-
C
g Connector for
3.5 mm headset
h Near Field Commu-
nication (NFC)
i External device
docking station
j Compartment with
slots for battery,
SIM card and Micro
SD card
k Speaker
Back side of the
Zenius800
Instrument Components 19
en
c
b
a
19418_001
a SIM card slot
b Micro SD card slot
c Battery connectors
Battery compart-
ment
Instrument Components 20
en
This manual suits for next models
1
Table of contents
