Gericom GTV3203 User manual

Operating Instructions
32 LCD DISPLAY

Dear customer
Before operating the set, please read this Operating Instructions
carefully. In order to use and maintain the set better, please follow
its operating instructions.
Thank you for your cooperation.
Thank you for selecting the high-definition TFT LCD Color TV.
Table of Contents
I. Main features and functions
II. Safety and operating instructions
III. Specifications
IV. Accessories
V. Operating system diagram
VI. Mount up the base
VII. Connection for external video and audio equipment
VIII. Preparation for switch on
IX. Basic operation
X. How toadjust the imageeffect
XI How to adjustthe sound effect
XII The adjustment of MISC
XIII How to settime, sleep time and wake uptime
XIV How to receive DTV(YPbPr)/Component(YCbCr) signal
XV Adjustment of image display under Analog RGB(PC)/DTV(YPbPr) input status
XVI The PIPfunction under Analog RGB(PC)/DTV(YPbPr) input status
XVII STILL control
XVIII MUTE control
XIX Troubleshooting
Attached table 1
Attached table 2
1
2
2
3
3
6
7
8
9
11
12
13
14
15
11
4
16
13
15
15
15
16
------------------------------------------------------------------------
-----------------------------------------------------------------
-------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------
-----------------------------------------------------------------------
------------------------------------------------------------------------------------
---------------------------------------------------------------------
-------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------
---------------------------------
---------------------
---------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
----------
-------------------------------------------------------------------------------

There is high-voltageon the backgroundluminaire socket inside. Do not uncoverthe back coverat will.
Do not putany articles onthe screen.
It is strictlyforbidden to putthe unit in damp condition orunder strong directsunlight.
Dot not usethis unit innoisy and strong magnetic environment. The unit shallbe kept fromfire source
and strong vibrationsource.
Avoid the direct contactwith the chemicals.Do not use or store the unit in theenvironment which contains
the chemical gas.
Please always switchoff the power before installing and removing the connection of theperipheral
equipment.
If the unitloses the duefunction or you have found someabnormal phenomenon, suchas the emission of
strange odor ortoo high temperature,please switch off the power and contact thedealer or ourservice
center.
Do not watcha still picturefor a long time.
Do not modifythis unit byyourself.
Do not touchthe screen directly.
When there isdust on thescreen, wipe it gently with softcloth after switchingit off. Ethane can be used.
Acetone, Toluene and Alcohol cannot beused. If thereis any water or saliva, please wipe it immediately.
Please switch off theAC power ifthe unit is not used fora long time.
When this unitis used aswall-mounting, there shall be a 5mm distance betweenthe whole set and the wall
for the heatemission.
If it isthundering, you shouldturn off the power, and remove theantenna connection to avoid the
damage to thisunit.
In case theremote control isnot used for a long periodof time, takeout the batteries to avoid liquid leakage.
I. Main features and functions
II. Safety and operating instructions
In order thatyour LCD TV will maintain good operationstatus, please read the following items before
using the unit:
No radiation, lowflicker and lowpower consumption. It is an environment-protective and power-saving
product.
Light weight, smallcubage, dual-purpose usageof wall-mounting and desk-top.
Beautiful appearance, innovativetype, simple operationand convenient usage.
With dual-functionof TV receiver and computermonitor.
With multiway inputs: Video, S-Video, AV Scart,Scart RGB,DTV(YPbPr), Component(YCbCr) and
analog RGB(PC) .
With NICAMstereo function.
With nosignal around 10 minutes under TV mode or 1 minute under other modes,the unit willbe in a
energy saving status save energy and prolongthe service life.
Picture in picturefunction underAnalog RGB (PC)and DTV(YPbPr) input status.
Still picture function.
2
Receive CABLE/AIR TV signals (PAL,SECAM)
Do not exposethis TV outdoors or moistureto avoid firehazard or electricshock.
There is highvoltage inside theTV. It isnot allowed toopen the rearcover for service without
authorization to preventelectric shock.
Do not placethe TV on an unstablecart, table orinclined plane toavoid falling and causing personal injury.
Liquid can notbe spilled orobject can not fall into the TV toprevent fire hazard or electric shock.
No objects shallbe placed onthe TV.
Safety instructions
Operating instructions

III. Specifications
Note: The specifications are subjectto modification without notice .
Screen Size
Display Resolution
Aspect Ratioof Screen
Power Supply
TV Received Signal
Broadcast Signal System
DTV input/Component input
Analog RGB Input
Video Signal System
Signal Intensity
Video Input Voltage
Audio InputImpedance
Audio InputVoltage
Sound Output Power
Power Consumption
Weight
Dimension(W D H)
Ambient temperature
Ambient humidity
31.51 inch (diagonal)
1366 768
16:9
160~240V AC 50/60Hz
48.25MHz-168.25MHz
PALB/G,I,D/K, SECAM L, B/G, D/K
YPbPr (480p,576p,720p,1080i)/YCbCr(480i,576i) (HDTV support
format is inthe attached table)
VGA (thesupporting format isin the attached table)
PAL , NTSC , SECAM
60dB
1Vp-p
47K
0.75V~1.5V (rms
5W+5W
Operation 200W(MAX), Stand-by: 3W
21kg
817mm 300mm 627mm (desk mounting)
5~35 C
20%-80%RH
3
Max. Visual Angle +=88 (CR 10)
Horizontal angle x+=88 (CR 10) Vertical angle
Y
x-=88 Y-=88
Remote controller
AC power cord
Operating Instructions
1
1
1
IV. Accessories
175.25MHz-463.25MHz 471.25MHz-855.25MHz
Video input Video, S-video, AV Scart, Scart RGB
DTV(YPbPr), Component(YCbCr),Analog RGB(PC)
Base 1

4
V. Operating system diagram
Remote sensor
Power indicator
Front view
P+
P
V+ V
TV/AV
MENU
MENU
P+
P-
V+
V-
TV/AV
Stand-by switch
Description of basiccontrol button
Control button The function duringwatching The function whenusing the menu
Select the screendisplay
menu system
Select to displaythe next
stored channel
Select to displaythe previous
stored channel
Increase volume
Decrease volume
Switch the inputsignal
Stand-by / On
Exit menu
Select the previousmenu/ item
Select the nextmenu/ item
Select the submenuof current
item
Confirmation
Confirmation
Decrease the valueof the current
item
/
The operation situationshown by theIndicator :
1. Green light-Operation status.
2. Red light-Stand-by status.
3.Flaring of greenlight-Energy saving status.
Reset procedure
1.Make theset at Stand-bystatus. (Red LED lights)
2.Press P+and V+ keys on thepanel at the same time anddon't release.
3.Press keyon the paneltill the image or noise displays on the screen.
4.Release threekeys.
Increase the valueof the
current item
Enter or select menu

5
Rear view
Power Switch
PC IN S-VIDEO
R L
VIDEO 1
Y Pb/Cb Pr/Cr
AUDIO
SCART
PC AUDIO
AIR/CABLE
PC Input SCART Input/Output
(Decoder)
S-Video Input
Component Video Input/HD Video Input Antenna Input
Video Input1
Audio Input
PC Input
AC IN
R
L
AUDIO
OUT
Power Input
Audio Out
SCART2
SCART 2Input/Output
(Decoder)

6
VI. Mount up the base
Mount up thebase
(1)Put the TV on a table facedown.
(2)Take out the baseand fasten itto the TV with 4 M5 20 screws(black).
The Screw holes are asshow on fig.1.
The TVand the connectingface of thebase can be rotated together.
o
(3)Stand the TV with the base onthe table. Itcan be rotatedclockwise and counterclockwise up to 15 .
(4)When the redline in theindication window pointsat the centraldot, it means that the screen is just in
forward direction.
fig.
1
window
Red line
Center dot
fig.
2
The enlarged
indication window

7
VII. Connection for external video and audio equipment
AIR/CABLE
AUDIO OUT
L R
YCb r
OUT
DVD&SET-TOP BOX
R
L
AUDIO
OUT
AUDIO IN
L R
POWER AMPLIFIER
PC
S-VIDEO
OUT
AUDIO OUT
L R
L R
YPbPr
L R
VIDEO
OUT AUDIO
OUT
AUDIO OUT
OUT
DVD&SET-TOPBOX
S-VIDEO
OUT AUDIO OUT
L R
L R
VIDEO
OUT
AUDIO
OUT
DVD&VCD
Use proper signal Cables to connect outputs of signal sources and inputs of the unit correspondingly.
Make sure of good contact.
All connection and disconnection can only be done under off status.
The computer can only be switched on after switching on the external equipment.
If you connect an external device e.g. a DVD player over SCART interface with the TV and switch it on, the screen
shows you the picture of the DVD player and the signal source is still in TV mode. If you want to go back to TV program,
please press the P+/- button to switch back. It is impossible to switch back to TV program over the TV/AV button.

5
8
1.Install the batteryfor the remote controller
a. Press thecover of thebattery compartment onthe back of theremote controller and remove it.
b. Insert 2AAAbatteries, make surethe polarity (+) or (-) of batteries conforms tothe polarity marksin the
battery compartment.
c. Slide thecover of thebattery compartment to the original place.
VIII. Preparation for switch on
Please do notmix the newand old batteries. Do not mix manganese and
alkali batteries. Pleaseuse the remote controller carefully to avoid to
drop, wet or dismantle it .
In case thecontroller is not in use for a long time, takeout the batteries
to avoid liquidleakage.
The used upbatteries should bedisposed in an environment-protection way.
Note:
Name Function
MUTE
TV/AV
SLEEP
PICTURE
PIP
EXIT
MENU
P+
P-
V+
V-
V-SIZE
MTS
SWAP
STILL
1234567890
CALL
TIME
TEXT
SOUND
BRIGHT
ERASE
SKIP
INSERT
REPLACE
Stand-by / On
Channel information display
Time display(TIME menu should be set at first)
MUTE On/Off
TV/AV Scart/AV 1/AV 2/S-Video/Component/Analog RGB/
Sleep time setting
Shortcut button foradjusting picture
Exit menu
Next stored channel/previousmenu/previous item
Previous stored channel/nextmenu/next item
Volume increase/ itemvalue increase
/ item contentselection
Volume decrease/ itemvalue decrease
/ item contentselection
Adjustment of imagesize
Selection button ofsound mode
DUAL/MONO/STEREO
Channel playback
Still image
Digit selection
Change of bright/ dark image
Menu selection/confirmation
function of teletext
Shortcut button foradjusting Sound mode
Delete program
Skip program
Store program formanual scan
Replace program
TV/AV PICTURE
P-
P+
MENU
V+
V-
MUTE
SLEEP
SWAP
PIP
EXIT
1 2 34
56 7 8
9 0
TEXT
STILL
V-SIZE MTS
CALL
SOUND
SLEEP
i
TIME BRIGHT
ERASE SKIP INSERT REPLACE
Picture-in-picture selection underPC/DTV input status
2.Description of remote controller buttons
DTV YPbPr

AUTO SCAN
SYSTEM B/G D/KI
STORAGE P1
SCAN Press MENU
9
TV SETUP
AUTO SCAN
MANUAL SCAN
FINE TUNE
MENU UP DOWN
Press MENU
Press MENU
EXIT
50
Insert one plugof theAC Power Cord in the jack of Power Inputof the unit.Insert the other plug ofAC Power
Cord to thesuitable ACpower socket with grounding. Then switch on thePower switch ofthis unit. The red
light of PowerIndicator will bebright and the unit enter uponthe stand-by status.
Press button onthe remote controlleror on thepanel, the systemwill begin to work. The green light of
Power Indicator willbe bright andthe image appears on the screen.
When completing watchingthe broadcasting contentof this unit, press button onthe remote controlleror
on the panel,the unit willcome back to the stand-by status. The Power Indicator on thefront panel willturn
into red from green.
Switch it off and pullout the plug of AC Power Cord.
Note: Most partof this circuitis digital. If there is anyabnormal phenomenon, pleasepull out the plug
of Power Cord to switch off, and thenswitch on after 2 minutes. If the set stillcan not work
normally, please execute Resetprocedure on Page4 or contact the Service centre.
IX. Basic operation
2. Select thereceiving signal inputstatus
Press the TV/AV button. And themenu will appear.
Select the desirablesignal by pressingP+ or P-.
Press MENU toconfirm the selection.
1. Power on/ off operation.
1 Auto scan
Press TV/AV button on the remotecontroller or on the
panel to selectthe TV status.
Press MENU buttonon the remotecontroller or on
the panel .
Press P+ orP- button toget TV SETUP menu,
the menu (a) will appear onthe screen.
Press MENU buttonto enter, then press P+ or P-
button to selectAUTO SCAN item.
Press MENU buttonto enter.The menu(b) will
appear on thescreen.
Press P+ orP- button toselect SYSTEM item,
press V+ or V- button toadjust TV standard.
Press P+ orP- button toselect STORAGE item,
press V+ or V- button toadjust program
number.
Press P+ orP- button toselect SCAN item, press
MENU button toconfirm. The unit will
begin the automaticsearch and store.
2 Manual scan
Press P+ orP- button toselect MANUAL
SCAN item onTV SETUPmenu.
Press MENU buttonto enter.The menu(c)/(d) will
appear on thescreen.
Press P+ orP- button toselect SYSTEM item,
press V+ or V- button toadjust TV standard.
Press P+ orP- button toselect STORAGE item,
3. How toreceive and watchthe TV signal correctly
EDIT Press MENU
UP DOWN LEFT RIGHT EXIT
MANUAL SCAN
SYSTEM B/G
STORAGE P1
BAND V/UHF
CHANNEL 2
UP DOWN LEFT RIGHT EXIT

7
7
10
3 FINE TUNE
If the image received is not very good, you can press P+ or P- to select FINE TUNE item in menu (a) . Then,
press V+ or V- button to adjust and improve the image quality.
4 Editing program
The function is for users to write or change the name of the
program, change the number of the channel and delete the program.
Press MENU and Press P+ or P- to select TV SETUP menu.
Press MENU to confirm.
Press P+or P- to select the item Edit in menu(a) and press Menu
button to confirm. Menu(e) will appear on the screen.
Press P+or P- button to select the group of programswhich are in the same page.
Press V+ or V- button to select the number of the program in the group to be changed, which becomes yellow.
Press MENU to confirm it and the program number becomes black.
Skip the program number: Press SKIP button on the remote controller. The program number and S in front
of the numbers turn into yellow from green.
The green S in front of the program number means that the program under this number is existing. The yellow
S means the program deleted. During watching, the deleted numbers can not be selected when selecting
channels by P+ or P- buttons. Select the program bydigit buttons and the program numbers are yellow.
Erase the program number: Press ERASE button onthe remote controller. The TV contents under the current
program number will be replaced with the TV contents of next program number. And therest TV programs
afterwards will be moved to their previous program numbers correspondingly.
(e)
S01BEST__ S02______ S03_____
S04______ S05______ S06_____
S07______ 08______ 09_____
EDIT PROGRAM
press V+ or V- button toadjust program number.
Press P+ orP- button toselect BAND item.
Press V+ or V- button toselect V/UHF or CABLE.
Press P+ orP- button toselect CHANNEL item.
Press V+, V-or digital buttonto select channel number.
If the programis desirable, pressINSERT or REPLACE button
on the remote controller and theprogram will be stored under
the current programnumber.
Press EXIT for exiting.
5 SWAP
When watching theTV program, press the SWAP buttonon the remote controller and the current TVprogram
will be rapidlyswitched to theTV program which was previouslywatched.
Change the program number: Press P+ or P- repeatedly to change the number of the program from 01 to 99.
Edit the program name: Press V+ or V- to select the position of the cursor. The black cursor is the editing position.
Press P+ or P- to change the cursor from 0 to 9 then fromA to Z repeatedly.
For example, move the program 06 to the position of 01 and change the name of the program to BEST:
Press MENU. Press P+ or P- to select EDIT of TV SETUPmenu.
Press Menu button and the menu(e) appears on the screen.
Press P+or P- button to select the group of programs containing program 06.
Press V+ or V- button to move the cursor to 06 and the number 06 becomes yellow. Press Menu button to
confirm. The number 06 becomes black and cursor position becomes yellow.
Press P+ or P- to change 06 to 01.
Press V+ or V- button to remove the cursor to the first bar. Then 01 becomes yellow and the first bar
becomes black. Press P+ button until B appearing.
Repeat the above steps to set the following bars for E,S,T. Press Exit button to exit. Thereby Program 06
becomes Program 01. P1 BEST will display when the Channelis switched.
MANUAL SCAN
INSERT REPLACE
SYSTEM B/G
STORAGE P1
BAND V/UHF
CHANNEL 2
UP DOWN LEFT RIGHT EXIT

11
PICTURE
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TEMPERATURE
RECALL
50
50
50
50
Normal
Press MENU button
Press P+ orP- button toselect PICTURE menu,the
image (i) willappear on thescreen and pressMENU
button to confirm.
Press P+ orP- button toselect the item,then press
V+ or V- to increaseor decrease thevalue of item.
BRIGHTNESS change the brightnessof the image.
CONTRAST change the contrast of the image.
COLOR change the colorof the image.
SHARPNESS change the sharpnessof the image.
TEMPERATURE change the color temperature of the
image.
RECALL- recover thefactory setting.
Press EXIT button to exitthe menu.
X. How to adjust the image effect
PICTURE
BRIGHTNESS
CONTRAST
COLOR
HUE
SHARPNESS
TEMPERATURE
RECALL
50
50
50
50
50
Normal
Press MENU
Press MENU
XI. How to adjust the sound effect
Press MENU button
Press P+ orP- button toselect SOUND menu,the
image (k) willappear on thescreen, then pressMENU
button to confirm.
Press P+ orP- button toselect the item, and press MENU
to confirm thenpress V+ or V- button to increase or
decrease the valueor select thestatus.
SOUND
VOLUME
BALANCE
SOUND MODE
20
0
AVC Off
NO DATA
100100 100100
6 How to use the function of teletext
Start-up
Press TEXT button on the remote controller and the
image (f) will appear on the screen. It means that the
function of teletext starts.
Press TEXT
.
button on the remote controller repeatedly and the
image of teletext will change accordingly. Teletext TV
Page turning
Press the P- or red button to turn to the previous page.
Press the P+or green button to turn to the next page.
Press yellow button, the content under item on the yellow bar will appear on the screen.
Press blue button, the content under item on the blue bar will appear on the screen.
Press digit buttons 0 to 9 to select the desirable page. For example, press 2,0,8 to select the page 208.
Special function of teletext
Press ? Button to reveal.
Press button to hold the current teletext on the screen.
Press i button to display the table of contents of teletext.
Press button to switch the size of teletext.
NORMAL
Note:
Item HUE willbe available onlywhen the inputsignal
is in NTSCmode.
There is aPICTURE shortcut buttonon the remote
controller to letyou quickly adjustBrightness etc.
MENU UP DOWN EXIT
MENU UP DOWN EXIT
MENU UP DOWN EXIT

9
12
10
XII. The adjustment of MISC
MISC includes theadjustment of videosize, OSD
sheet, OSD position,etc.
Press MENU button.
Press P- orP- button toselect MISC menu,the
image (n) willappear on thescreen, then pressMENU
button to confirm.
Press P+ orP- button toselect the item, then press
V+ or V- button to select the status of item.
VIDEO SIZE Fill Screen FitAspect TV Mode
Letter Box Letter Box Title Auto Fill Screen
( Pressing theV-SIZEshortcut button onthe remote
controller has thesame function.)
OSD SHEET Translucent Opaque Translucent
OSD POSITION
Press EXIT button to exitthe menu.
OSD LANGUAGE:
German Dutch Portuguese English
Italian Spanish French
FILM MODE Film Video Film
MISC
VIDEO SIZE
OSD SHEET
OSD POSITION
FILM MODE
Fill Screen
Opaque
Video
OSD LANGUAGE English
MISC
VIDEO SIZE
OSD SHEET
OSD POSITION
FILM MODE
Fill Screen
Opaque
Video
OSD LANGUAGE English
When the signal input statusis AV Scart
AV1, A 2, S-Video, the menuis (m),
instead of (k).
Note:
SOUND
VOLUME
BALANCE
SOUND MODE
20
0
NORMAL
AVC Off
UP DOWN LEFT RIGHT EXIT
EQUALIZER
120Hz 0
500Hz 0
1.5KHz 0
5KHz 0
10KHz 0
SPATIAL 50
VOLUME change the soundvolume
BALANCE change the balanceof the leftsound track
and right soundtrack ( 0is the balancepoint)
SOUND MODE: Normal Cinema News Flat User
Normal
( Pressing the shortcut button on the remote
controller has thesame function.)
MENU
AVC Automatic volumecontrol (limiting sound
volume)
Press EXIT button to exitthe menu.
SOUND
When SOUND MODEis set atUSER, select
EQUALIZER item fordesirable sound. Press ,
image(l) will appearon the screen.Use P+ orP- to
select the item,V+ or V-to adjust thevalue
Note: When the signal inputstatus is AV Scart,AV1 ,
AV2, S-Video, the menuis (o), instead of (n) .
Analog RGB and DTV modes have noFilm
Mode item.
MENU UP DOWN EXIT
MENU UP DOWN
EXIT
MENU UP DOWN
EXIT

10
13
XIII. How to set time, sleep time and wake up time
(1) Sleep time setting
Press button.
Press P+ or P- button to select TIME menu, the image
(p) will appear on the screen, then press button to
confirm.
Press P+ or P- button to select the SLEEP item and press
MENU to confirm. Then press V+ or V- button to select time.
MENU
MENU
(3) Time setting
Press P+ or P- button to select TIME item .
Then press button to confirm. Image ( r ) will
appear on the screen.
Press P+ or P- button to select hour or minute.
Press V+ or V- button to set time.
Press EXIT button to exit the menu.
in image (p)
MENU
Off 30Min 60Min 90Min 120Min
180Min Off
( Pressing theSLEEP shortcut button on theremote
controller has thesame function.)
TIME
SLEEP
WAKE UP
TIME
Off
WAKE UP
Off
LEFT RIGHT EXIT
Press P+ or P- button to select WAKE UP
item Then press button to confirm.
Image (q) will appear on the screen.
Press V+ or V- button to set the content of the item.
WAKE UP: Everyday Once Off
Press EXIT button to exit the menu.
in image(p). MENU
12:27
TIME
UP DOWN LEFT RIGHT EXIT
Connect theYPbPr output of the DVD playeror SET-TOP BOX with Y Pb/CbPr/Cr INPUT of the set.
Press the TV/AV button on the remotecontroller or onthe panel to select DTV input status andreceive
YPbPr signal.
Connect theYCbCr output of the DVD playeror SET-TOP BOX with YPb/Cb Pr/Cr INPUTof the set.
Press the TV/AV button on the remotecontroller or onthe panel to select Component input status and receive
YCbCr Signal.
(2) Wake up function
Press MENU
Press MENU
XIV How to receive DTV(YPbPr)/Component(YCbCr) signal
MENU UP DOWN EXIT

14
XV Adjustment of image display under Analog RGB(PC)/DTV(YPbPr) input status
Press MENU button.
Press P+ orP- button toselect PICTURE menu,
the menu (s) will appear onthe screen, thenpress
MENU button toconfirm.
Press P+ orP- button toselect item and press MENU
to confirm, thenpress V+or V-button to changethe
value of theitem.
BRIGHTNESS- Change thebrightness of theimage.
CONTRAST-Change the contrast of the image.
Press EXIT button to exitthe menu.
Press P+ orP- button toselect TEMPERATURE
item in menu(s) . Then press V+ or V- button
to change theitem content.
Cool Normal Warm User Cool
When selecting User, the menu(t) will appear on
the screen. Then press P+or P- button to select
RED, GREEN orBLUE item. PressV+ or V-
button to increaseor decrease thevalues of the items
respectively.
Press EXIT button to exitthe menu.
1 The adjustment ofbrightness and contrast
Press P+ orP- button toselect POSITION item in
menu (s), thenpress MENU buttonto confirm, the
menu (u) willappear on thescreen.
Press P+ orP- button toselect the item, then press
V+ or V-button to increase or decrease the
value of theitem.
H-POSITION: change thehorizontal position ofthe
image.
V-POSITION:change the vertical position of the
image.
PHASE change the phaseof the imageto improve
the image quality.
H-SIZE: change thehorizontal width ofthe image.
When selectingAUTO ADJUST item, pressing
MENU button canautomatically adjust theimage to
the best status(onlyunder analog RGBstatus).
Press EXIT button to exitthe menu.
Note: Sometimes the DTV image is not at the center, please follow the procedures above to adjust the position.
2 Adjust the colortemperature of theimage
3 Adjust the imageposition, phase, H-SIZE,and auto
adjust
BRIGHTNESS
CONTRAST
TEMPERATURE Normal
POSITION Press MENU
PICTURE
50
50
BRIGHTNESS
CONTRAST
TEMPERATURE User
RED
GREEN
BLUE
POSITION
PICTURE
50
50
50
50
50
Press MENU
H-POSITION
V-POSITION
PHASE
H-SIZE
AUTO ADJUST
POSITION
50
50
52
50
Press MENU
MENU UP DOWN EXIT
MENU UP DOWN EXIT
MENU UP DOWN EXIT

11 11
15
XVI. The PIP function under Analog RGB(PC)/DTV(YPbPr) input status
Press MENU button.
Press P+ orP- button toselect PIP menu, the
image (w) willappear on thescreen, then press
MENU button toconfirm.
Press P+or P-button to selectthe item. Select PIP
ON/OFF item, thenpress V+ or V- button to select
PIP ON.
Press EXIT button to exitthe menu.
PIP ON/OFF PIP off PIP on PIP off
(The PIPshortcut button on the remote controllerhas
the same function.)
PIP SOURCE TV AV Scart AV1 AV2
S-Video TV
AUDIO SOURCE MAIN PIP MAIN
PIP POSITION
XVII STILL control
XVIII. MUTE control
Press the STILLbutton on the remote controller,the current imagebecomes still . Press the STILL button
again or wait20 seconds, thestill image will be released.
Press the MUTE button on the remote controller, the unit becomes mute .
Press the MUTE button again, the sound can be restored.
PIP
PIP ON/OFF
PIP SOURCE
AUDIO
PIP POSITION
SOURCE
PIP off
TV
PIP
XIX. Troubleshooting
If there isany abnormal situationduring the operation, please make the corresponding check accordingto the
following instruction beforesending it forrepair.
No raster
Interference of theimage
and sound
Check the connection of the power cord.
Check if the power switch is On .
Check if the unit is under stand-by status.
Check if the signal source has normal output under the current play status.
Pull off the power plug and switch on after 2 minutes.
Check the direction, location and connection of the antenna.
Check if the signal is interfered under the current play status .
Check if there is any interference by the electric apparatus nearby .
Check if the power of the unit and the signal source is stable .
Check if the grounding of the signal cable is good .
Check if any of the buildings nearby reflects the radio wave.
(Power indicator is red)
The intensities of TV signals in different areas are different. If the image of TVprogram received through RF
is not clear, please use AV OUT or S-VIDEO OUT on SET-TOP BOX to receive it.
MENU UP DOWN EXIT

1212
16
No image andsound
Check if the power cable is connected .
Check if the signal source has normal output under the current play status.
Check the brightness and contrast of the image and check if the volume setting is correct.
If it is under stand-by status.
Check if the sound has been input correctly.
Check the volume setting.
Check the MUTE setting.
Check the color setting.
Check if the signal source has normal output under the current play status.
Check the contact and pole of the batteries in the remote controller , or change the batteries.
Clean the transmission window of the remote controller and the receiving window of this unit.
Image is normal,but
there is nosound
Others
The image hasno color
The remote controllerdoes
not work
Check if there is any obstacle between the transmission window of the remote controller and the Remote sensor of this unit.
Although the imageand sound arenormal, there couldbe noises sometimeswith the change
of the channeland signal sources. It is normal.
Attached table 1
HDTV input support
Attached table 2
Note: Do notuncover the backcover at youown will.
Afew of constantlyilluminated or offpixels could be found on the image due to manufacturing
engineering of thescreen. It willnot affect yourwatching.
PC input support
RESOLUTION
REFRESH FREQUENCY
MODE H-Freq.(kHz)
31.5
37.5
43.3
2
37.9
48.1
46.9
53.7
48.4
7
85
X
X
X
X
X
X
X
X
X
X
X
X
X75
56.5
60.0
68.3
64.0
80.0
Note: The image is thebest when your PC is at Xformat.
X
X720(720p)
720X480 (480i)
720X576 (576i)
720X480 (480p)
720X576 (576p)
60Hz
60Hz
60Hz
50Hz
60Hz
50Hz

SPW2.025.347 SS