Gevi GECGI406B-U7 User manual

Read this booklet thoroughly before using this coffee machine for the quick use.
GECME020DE-U
INSTRUCTION BOOKLET
2-in-1 Burr Coffee Grinder
35 Precise Grind Settings
Espresso丨Drip Pour Over丨French Press
GECGI406B-U7
Please read all the owner’s instruction booklet before use.
Excluding Portafilter
*

05
10
13
22
24
32
35
03
07
01
1. Important Safeguards
2. Know Your New Machine
3. More Details
4. Before First Use
5. The Quest For Perfect Powder
6. Operation Guide
7. Other Functions
8. Care & Cleaning
9. Troubleshooting Guide
10. Warranty
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents
A truly perfect brew starts with ground coffee, but it takes the right
grinder for coffee beans to reach their full potential. You can select
cup quantity or grinding time by touching the LED Screen to grind
an exact amount of coffee you want.
Perfect coffee
from the grounds up
The high torque/low speed grinder helps keep beans from overhe-
ating during even the longest grinding session, creating a uniform
grind for optimal flavor extraction, and generating minimal static to
reduce mess.
Whether you like strong or weak, espresso or drip, French press or
pour over, our coffee grinder can help you get the grinds you need to
make your perfect cup.

21
1. Important Safeguards 1. Important Safeguards
When using electrical machines, basic safety precautions should
always be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put in water
or other liquid.
3. Close supervision is necessary when any machine is used by
or near children.
4. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
5. Avoid contacting moving parts. Do not attempt to defeat any
safety interlock mechanisms.
6. Do not operate any machine with a damaged cord or plug or
after the machine malfunctions, or is dropped or damaged in
any manner. Return machine to the nearest authorized service
facility for examination, repair or electrical or mechanical
adjustment.
7. The use of attachments not recommended or sold by the manu-
facturer may cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Do not let cord contact hot surface, including the stove.
11. This machine is not intended for use by children or by persons
with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge. Close supervision is necessary when
any machine is used near children. Children should be supervised
to ensure that they do not play with the machine.
12. Turn the machine OFF, then unplug from the outlet when not in
use, before assembling or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the outlet. Never pull from
the power cord.
13. Check hopper for presence of foreign objects before using.
A short power-supply cord (or detachable power-supply cord) may
be provided to reduce risks resulting from becoming entangled in or
tripping over a longer cord. Longer detachable power- supply cords
or extension cords are available and may be used if care is exercised
in their use. If a long detachable power-supply cord or extension cord
is used:
a. The marked electrical rating of the detachable power-supply cord
or extension cord should be at least as great as the electrical rating
of the machine;
b. If the machine is of the grounded type, the extension cord should
be a grounding type 3-wire cord;
c. The longer cord should be arranged so that it will not drape over
the counter top or table top where it can be pulled on by children
or tripped over unintentionally.
Do not pull, twist or otherwise abuse the power cord.
North American models with a grounded plug:
POWER CORD INSTRUCTIONS:
This machine has a polarized plug(one blade is
wider than the other). As a safety feature to reduce
the risk of electrical shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to defeat this safety feature
or modify the plug in any way. If the plug fits loosely into the AC outlet or if the
AC outlet feels warm, do not use that outlet.
POLARIZED PLUG
NOTE
For electronic instruction booklet, please contact Gevi support team.
SAVE THIS INSTRUCTION BOOKLET

43
❺ LED Screen
Displays number of cups
and current grind time. ⓭ Time Selection Icon
Available from 1 to 60
seconds, long press for
a fast increase.
⓯ Powder Chamber
Accommodates up to 130g
of ground coffee.
⓮ 2-in-1 Silicone Lid
Powder chamber Lid &
Residual powder collector.
❼ Portafilter Bracket
Supports portafilter while
ground coffee coming out.
（ Excluding Portafilter）.
❾ Coffee Spoon
For easily adding beans to
bean hopper.
❿ Cleaning Brush
For easily cleaning the
conical burrs.
❻ Powder Outlet
The coffee powder is
delivered directly into
the portafilter or powder
chamber.
⓫ Cup Selection Icon
Available from 1 to 14 cups,
long press for a fast increase.
⓬ Start/Stop Icon
- Start Grinding: One touch
to start/pause.
- Safety-Lock Mode: Long
press 2s with one beep.
- Switch Off: Long press 4s
with two beeps.
❷ Bean Outlet
Coffee beans are filled
directly into grinding
chamber.
❽ Bean Hopper Lid
A coffee spoon and cleaning
brush are stored on the back.
❶ Bean Hopper
240g bean hopper with
locking system for easy
removal and bean transfer.
❸ Hardened Conical Burr
Stainless steel conical burr
with removable upper burr
to maximize particle size for
full flavor potential.
❹ Grind Size Selector
Allows for 35 grind settings
for precision adjustment.
2. Know Your New Machine 2. Know Your New Machine
Model: GECGI406B-U7 120V~60Hz 200W
⓮
⓯
⓬ ⓭⓫
❶
❷
❸
❹
❺
❻
❼
❾
❽
❿

2-in-1 Silicone Lid
Features a narrow top opening for less mess and easy
dispensing.
Used as a residual powder collector & powder cham-
ber lid.
Removable Powder Chamber
Accommodates up to 130g of powder.
Portafilter Bracket
Use the included portafilter bracket to grind the coffee
beans directly into the portafilter.
Hardened Conical Burrs
Create a precise, uniform grind for optimal flavor. Ma-
ximize the full flavor potential of coffee beans.
65
UV-Blocking Tint
Bean hopper keeps harmful UV rays away from delicate
coffee beans to keep them fresh longer.
3. More Details
Lower-RPM
The working noise is below 75dB.
Mess-Free Bean Hopper Design
Hopper features a “trap door” to hold beans in when
removed.
35 Grind Settings
Well-suited for producing powder from fine for espresso
to coarse for French press.
Powerful DC Motor
670 rpm Grinder will not overheat beans, protecting
flavor even during extended grinding, and generates
minimal static to reduce mess.
Reduce Clutter with Hidden Cord Storage
A hideaway cord storage at the bottom of the grinder
stores the cord neatly and out of sight when it is not in
use.
Overheating Protection
The coffee grinder would rest for 30 minutes automa-
tically if the working time exceeds 3 minutes.
200W Peak Output Power
Continuous and even grinding guaranteed for better
maintaining the original rich aromas and oils of coffee
beans.
Spoon & Brush
A coffee spoon and cleaning brush are stored on the back.
Large Capacity Bean Hopper
Hopper holds 0.53lb(240g) of coffee beans.
Intuitive LED Screen
Grind based on number of cups or grinding time to
customize your brew.
Start Grinding & Enter Safety-Lock Mode & Switch On
/Off.

87
1-Bean Hopper Lid, Powder Chamber, 2-in-1 Silicone Lid, Portafilter
Bracket, Coffee Spoon and Cleaning Brush are dishwasher safe, bean
hopper and upper burr are not dishwasher safe.
NOTE
4. Before First Use
Remove all protective films and other packaging material from the machine.
Place the machine on a flat stable surface and ensure a minimum of 10cm
free space around the machine. This machine is not suitable for installation in
a cabinet or for outside use.
4.1 Remove Packaging 4.4 Wash & Dry
4.5 Install Accessories
4.2 Position Machine
4.3 Remove All Accessories
4. Before First Use
Hold the bean hopper and
rotate it counterclockwise
until it stops.
1
Hold the bean hopper with
one hand and take it out.
Grab the two grooves on
upper burr to take the burr
out.
23
Remove powder cham-
ber from grinder.
415
Remove bean hopper lid
from bean hopper and
take out coffee spoon and
brush from the lid.
Open silicone lid of the po-
wder chamber and then take
out portafilter bracket.
Insert upper burr into the
grinder by aligning the
burr's white dot with the
notch on the grinder collar.
1
12
Rinse thoroughly with warm
water or clean in a dishwa-
sher(bean hopper and upper
burr are not dishwasher safe).
Dry the accessories with a
clean cloth.
1
1 2
Attach coffee spoon and
brush to the bean hopper
lid.
Secure lid on top of bean
hopper.
3
MAX
1
Align
1
Rotate
MAX
63
2-Make sure the bean hopper and upper burr must be wiped dry after
cleaning, otherwise they would probably damage the grinder and affect
your coffee.

109
1-Bad beans will not only affect your grinding results but also ruin your final
coffee. There are many types of beans on the market. To ensure best grinding
results, high quality beans are recommended.
Element 1: Beans
4.6 Idling Test
Install bean hopper to gri-
nder by aligning with .
Hold the bean hopper and
rotate it clockwise to lock.
1
45
4. Before First Use 5. The Quest For Perfect Powder
Insert & Align
Touch the Start/Stop icon
to start grinding.
When it is plugged again
into a power outlet, for
safety purposes, the ma-
chine will automatically
enter safety-lock mode
in which the Start/Stop
icon will flash. In this ca-
se, long press the Start/
Stop icon for 2 seconds
to unlock.
Idling test the machine to
check whether the grinder
running smoothly.Also to
see whether time shown
on screen starts to count
down and then machine
will automatically stop.
Rotate
2-All of the flavor comes from the beans, choose different kinds of roasts and
beans according to the type of coffee you make.
3-Buy in small batches to reduce the storage time due to use freshly roasted
coffee beans with a ‘roasted on’ date to maximize flavor, not a use-by or
best before date.
4-Store coffee beans in a dark, cool and dry place. Vacuum seal if possible.
Do not store beans in the bean hopper. Place them back in an airtight con-
tainer.
If you buy large portions of beans, separate them into one or two week portions
and store them in airtight containers. Preserve freshness by minimizing exp-
osure to air, light, and moisture.
1-As our machine is equipped with a voltage of 100-120V and UL plug, to
prevent burning out, do not connect the grinder with any improper power
supply.If the machine is not connected to a voltage of 100-120V, you make
sure an adapter is being used.Rated power of the adapter should be higher
than 300W, otherwise it will not function normally or even could be burnt out.
NOTE
2-Do not touch LED screen with oily hands or using too much force, oth-
erwise it will not work.
123

1211
1-Optimal grind size depends on many factors including brewing method, roast
darkness, bean type and freshness, and more. Experiment with different grind
settings to achieve the brew that best suits your taste.
3-If your coffee tastes too bitter, try a coarser grind size. If your brew is weak,
adjust to a finer grind size. (1=finest, 35=coarsest).
COFFEE TYPE ESPRESSO DRIP POUR OVER FRENCH PRESS
COARSE
25-35
MEDIUM
15-25
FINE
1-15
GRIND SIZE
GRIND SETTING
Element 2: Grinding Size
1-If the grind is too fine, overextraction and bitterness will result. Too fine
a grind may also clog the filter and cause water to overflow.
NOTE
1-This grinder can only grind dry beans. It will not grind anything moist, ext-
remely hard, or gummy such as whole ginger, chocolate, sesame seeds or oily
spices such as cinnamon, cloves or nutmeg. Do not grind peanuts or grains
such as wheat, rice, barley, or dried corn. Attempting to grind any of these
foods may damage the unit. Never use it to chop ice cubes.
6-When storing the machine, run grinder empty to clear ground beans left in
chamber, as some older coffee dust may be sitting inside your Grinder and will
affect the quality of your next batch.
Element 3: Operation Tips
5. The Quest For Perfect Powder 5. The Quest For Perfect Powder
2-You may need to vary the Grind Setting when using different coffee beans
and depending on bean freshness. The range of 35 Grind Settings allows for
precision adjustment, controlling the grind size and ultimately the character-
istics of the resulting extraction.You can refer to the following table:
2-It is recommended not to pour too many beans into the bean hopper at
once, and to grind beans as much as you need at the time of use for best
flavor. If you add too many beans, remove them from the bean hopper and
store them in a vacuum container.
3-To pause grinder during operation, press Start/Stop icon to stop.
4-After every time switch grind setting size, firstly place the silicone lid of
powder chamber under the grinder powder outlet, and then grind a small
amount of beans and discard, this can avoid powder from your last grind
affecting your coffee.
If you feel hard to adjust grind size by rotating the bean hopper from coarse
to fine, rotate the Grind Size Selector while the machine is grinding. If this
still does not work, refer to "8.2 Weekly Using " of "8.Care & Cleaning ", page 24.
5-To save your time and meet your personal taste, we suggest that you firstly
test to confirm your desired grind size and bean amount, and then grind the
beans by time mode. Make a note of how much time it takes so that next
time you can easily get your desired powder by inputting the recorded time
based on same type of beans and grind size. If changing grind size and beans,
please follow the above method to get the new time.
7-Do not operate the grinder for more than 3 minutes at a time, Otherwise the
grinder will stop automatically to protect its motor and maintain its lifespan.
The grinder will not start regardless of any operation until it cools down for 30
minutes.
2-If grind is too coarse, the water will pass through too quickly and the
maximum flavor will not be extracted.

1413
6.1 Operation By Cup Mode - Use Powder
Chamber
6. Operation Guide 6. Operation Guide
1-When it is plugged again into a power outlet, for safety purposes, the machine
will automatically enter safety-lock mode in which the Start/Stop icon will flash.
In this case, long press the Start/Stop icon for 2 seconds to unlock.
NOTE
1
1
Remove bean hopper lid
from bean hopper.
1
Fill bean hopper with fresh
beans.
23
Secure lid on top of bean
hopper.
1
14
Hold top of hopper and
rotate to select grind size.
Fine Coarse
Press & Release
Place powder chamber
under the powder outlet
(round cap on the silicone
lid must be opened and
put to one side).
2-For safety purposes, the grinder powers down to safety-lock mode after 5
minutes of non-use. By that time, only the Start/Stop icon flashs, LED screen
and other icons will off.
3-To switch it off, long press the Start/Stop icon for 4 seconds and there will
be 2 beeps, LED screen and all icons will go out. Unplugging is not needed.
4-If it is switched off without unplugging the power, long press the Start/ Stop
icon for 4 seconds to switch it on, and after 2 beeps the three icons will illu-
minate.
1
1
MAX
5
Select cup quantity you need
by Touching " "(1-14
cups).(Single touch incr-
ease one cup, long press
for a fast increase.)
Press & Release
7
When it is plugged again
into a power outlet, for
safety purposes, the ma-
chine will automatically
enter safety-lock mode in
which the Start/Stop icon
will flash. In this case, long
press the Start/Stop icon
for 2 seconds to unlock.(If
the machine hasn’t been
unplugged all along, skip
this step).
1
18
Touch Start/Stop icon to
start grinding, and then
it will automatically stop.
The preset amount of co-
ffee is dispensed into pow-
der chamber.
MAX
9
6

1615
6. Operation Guide 6. Operation Guide
Hold and tap the grinder
carefully to drop all the
residual powder.
MAX
Tap
10 1
1
Move the powder chamber
away from grinder.
11
MAX
Close the round cap on
the silicone lid.
1
1
Place silicone lid under
grinder powder outlet to
collect residual powder.
15 6.2 Operation By Time Mode - Use Powder
Chamber
1
1
Remove bean hopper lid
from bean hopper.
1
Fill bean hopper with fresh
beans.
23
Secure lid on top of bean
hopper.
12
Lay the grinder on its side,
and then insert a cleaning
brush into the deepest
part of the powder outlet
for cleaning.
17
Wipe powder outlet with
a soft cloth.
Hold the bean hopper and
rotate it counterclockwise
until it stops.
1
Hold the bean hopper with
one hand and take it out.
14
1
Align
13
Rotate
1
118
Remove silicone lid and
discard residual powder.
MAX
11
16
19
Wipe clean the grinder
base with a soft damp
cloth.
MAX
20
Close the lid to powder
chamber.

1817
6. Operation Guide 6. Operation Guide
Select grinding time you
need by Touching " "
( 1-60 seconds).(Single
touch increase 1 second,
long press for a fast inc-
rease).
1
1
Hold and tap the grinder
carefully to drop all the
residual powder.
MAX
Tap
10
Touch Start/Stop icon to
start grinding, and then
it will automatically stop.
8
1
1
MAX
11
Move the powder chamber
away from grinder.
11
MAX
Close the round cap on
the silicone lid .
12
Place silicone lid under
grinder powder outlet to
collect residual powder.
13
1
14
Hold top of hopper and
rotate to select grind size.
Fine Coarse
Press & Release
Place powder chamber
under the powder outlet
(round cap on the silicone
lid must be opened and
put to one side).
MAX
5
18
Remove silicone lid and
discard residual powder.
17
Wipe powder outlet with
a soft cloth.
Hold the bean hopper and
rotate it counterclockwise
until it stops.
1
Hold the bean hopper with
one hand and take it out.
15
1
Align
14
Rotate
Place powder chamber
under the powder outlet
(round cap on the silicone
lid must be opened and
put to one side).
1
1
MAX
9
Lay the grinder on its side,
and then insert a cleaning
brush into the deepest
part of the powder outlet
for cleaning.
16
When it is plugged again
into a power outlet, for
safety purposes, the ma-
chine will automatically
enter safety-lock mode in
which the Start/Stop icon
will flash. In this case, long
press the Start/Stop icon
for 2 seconds to unlock.(If
the machine hasn’t been
unplugged all along, skip
this step).
7
6

2019
6. Operation Guide 6. Operation Guide
Close the lid to powder
chamber.
MAX
20
6.3 Operation By Time Mode - Use Portafilter
Bracket
1
1
Remove bean hopper lid
from bean hopper.
1
Fill bean hopper with fresh
beans.
23
Secure lid on top of bean
hopper.
1
14
Hold top of hopper and
rotate to select grind size.
Fine Coarse
Press & Release
56
Insert portafilter bracket
under powder outlet.
Place the Portafilter hor-
izontally and insert it into
the portafilter bracket.
Fine Coarse
Touch Start/Stop icon to
start grinding, and then
it will automatically stop.
10
Wipe clean the grinder
base with a soft damp
cloth.
1
119
1
1
Select grinding time you
need by Touching " "
( 1-60 seconds).(Single
touch increase 1 second,
long press for a fast inc-
rease).
1
1
Place silicone lid under
grinder powder outlet to
collect residual powder.
7
9
When it is plugged again
into a power outlet, for
safety purposes, the ma-
chine will automatically
enter safety-lock mode in
which the Start/Stop icon
will flash. In this case, long
press the Start/Stop icon
for 2 seconds to unlock.(If
the machine hasn’t been
unplugged all along, skip
this step).
1
112
Hold and tap the grinder
carefully to drop all the
residual powder.
Fine Coarse
11
Fine Coarse
The preset amount of coff-
ee is dispensed into porta-
filter.
Tap
8

2221
7. Other Functions
7.1 Safety-Lock Mode
1-To save your time and meet your personal taste, we suggest that you
firstly test to confirm your desired grind size and bean amount, and then
grind the beans by time mode. Make a note of how much time it takes so
that next time you can easily get your desired powder by inputting the
recorded time based on same type of beans and grind size.
TIPS
1-Safety-lock mode can keep you protect and help you save energy.
6. Operation Guide 6. Operation Guide
2
Long press the Start/Stop
icon for 2s to activate safety
-lock mode, and there will
be a beep sound.
In safety-lock mode, the
Start/Stop icon flashes
while other icons and LED
screen go out.
1113
19
Wipe clean the grinder
base with a soft damp
cloth.
Fine Coarse
Gently remove the portaf-
ilter from the portafilter
bracket.
Close the lid to powder
chamber.
MAX
20
2-If changing grind size and beans, please follow the above method to get
the new time.
Manually Enter
Safety-Lock Mode
Unlock Safety-Lock
Mode
2-The grinder automatically powers down to safety-lock mode after 5 minutes of
non-use without unpluging the grinder.
3-You can also manually enter or unlock safety-lock mode by following the steps
below:
Hold the bean hopper and
rotate it counterclockwise
until it stops.
1
Hold the bean hopper with
one hand and take it out.
15
1
Align
14
Rotate
11
Lay the grinder on its side,
and then insert a cleaning
brush into the deepest
part of the powder outlet
for cleaning.
16
18
Remove silicone lid and
discard residual powder.
17
Wipe powder outlet with
a soft cloth.

2423
8. Care & Cleaning
12
1
Align
1
Rotate
Hold the bean hopper and
rotate it counterclockwise
until it stops.
Hold the bean hopper by
hand and take it out.
Remove bean hopper lid
from bean hopper.
3
7. Other Functions
7.2 Switch On/Off
7.3 Overheating Protection
2-Whether it is unplugged or long pressed for 4s, the grinder will switch off. The
grinder has no memory function when the power is unplugged, but long press
for 4s to switch off and can remember the last operation.
1-When it is plugged again into a power outlet, for safety purposes, the machine
will automatically enter safety-lock mode in which the Start/Stop icon will flash.
In this case, long press the Start/Stop icon for 2 seconds to unlock.
1-To protect its motor and increase its lifespan, the grinder will automatically
switch off due to overheating after continuous operation over 3 minutes at a
time.
3-Long press the Start/ Stop icon for 4 seconds to switch it off and after 2 beeps
the three icons will turn off.
4-If it is switched off without unplugging the power, Long press the Start/ Stop
icon for 4 seconds to switch on and start grinding beans.
2-The grinder will not start regardless of any operation until it cools down for
30 minutes.
1-Make sure to unplug grinder from power outlet.
NOTE
Make sure to clean the ground coffee from the Powder Outlet after each use, as
some older coffee dust may be sitting inside your Grinder and will affect the
quality of your next batch. For operation guide, refer to page 14, steps 13-20
in section “6.1 Operation By Cup Mode - Use Powder Chamber”.
8.1 Each Using
If the grinder is used frequently like everyday, dark, oily beans will leave some
oil residue in the feeder channel. Over time this can slow down the flow of
ground coffee, regular cleaning helps the burrs achieve consistent grinding
results, which is especially important when grinding for coffee.
8.2 Weekly Using
2-Do not immerse the grinder in water.
3-Do not use alkaline cleaning agents, abrasives or metal scourers to prevent
damage to the grinder.

2625
1
Store any remaining beans
in bean hopper into an rti-
ght container to preserve
their freshness.
4
AIR TIGHT
CONTAINER
Secure lid on top of bean
hopper.
7
Put down the bean hopper
and align with .
Insert & Align
6
Hold the bean hopper and
rotate it clockwise to lock.
Rotate
Place powder chamber
under the powder outlet
(round cap on the silicone
lid must be opened and
put to one side).
Unplug grinder from power
outlet.
15
8. Care & Cleaning 8. Care & Cleaning
1
1
MAX
8
1
19
Hold bean hopper and
rotate to select the co-
arsest grind size.
Press & Release
Time shown on screen starts
to count down and then
machine will automatically
stop.
Hold and tap the grinder
carefully while it is grin-
ding to drop all the pow-
der. Touch the Start/Stop
icon to stop the grinder
when all beans have been
ground.
MAX
Tap
14
13
10
Insert the power plug into
a 120V AC power outlet.
Touch the Start/Stop
icon to run grinder.
12
35
For safety purposes, the
machine will automatically
enter safety-lock mode in
which the Start/Stop icon
will flash. In this case, long
press the Start/Stop icon
for 2 seconds to unlock.
11

2827
Step 4-Wash & Dry
8. Care & Cleaning 8. Care & Cleaning
1
1
17
19
1
1
Hold the bean hopper and
rotate it counterclockwise
until it stops.
Align
Rotate
16
Hold the bean hopper with
one hand and take it out.
Grab the two grooves on
upper burr to take the burr
out.
Lift up upper burr straig-
htly from grinder, and
then clean it with a cle-
aning brush to make sure
powder falls into grinding
chamber.
Clean lower burr with the
cleaning brush.
Lower burr
21
227 26
Turn the grinder upside do-
wn and pat to let the rem-
aining powder come out.
Pat The Bottom
Properly reposition grin-
der.
118
Remove bean hopper lid
from bean hopper and
take out coffee spoon and
brush from the lid.
28
Place silicone lid under
grinder powder outlet to
collect residual powder.
Hold and tap the grinder
carefully to drop all the
residual powder.
29
Tap
131
Remove silicone lid and
discard residual powder.
30
Wipe powder outlet with
a soft cloth.
125
Remove silicone lid and
discard residual powder.
23
Place silicone lid under
grinder powder outlet to
collect residual powder.
Lay the grinder on its side,
and then insert a cleaning
brush into the deepest part
of the powder outlet for
cleaning.
24
20
22
MAX
Move the powder chamber
away from grinder and dis-
card the powder inside.
Rinse thoroughly with warm
water or clean in a Dishwa-
sher(except bean hopper and
hardened top upper burr).
Dry the accessories with a
clean cloth.
1
32 33

3029
8. Care & Cleaning 8. Care & Cleaning
1-Bean Hopper Lid, Powder Chamber, 2-in-1 Silicone Lid, Portafilter
Bracket, Coffee Spoon and Cleaning Brush are dishwasher safe, bean
hopper and upper burr are not dishwasher safe.
NOTE
2-Make sure the bean hopper and upper burr must be wiped dry after
cleaning, otherwise they would probably damage the grinder and affect
your coffee.
If the grinder is not running smoothly during idling, repeat the above
steps 9-30 immediately before proceeding to next step.
NOTE
Insert upper burr into the
grinder by aligning the
burr's white dot with the
notch on the grinder collar.
1
34 35
Attach coffee spoon and
brush to the bean hopper
lid.
Secure lid on top of bean
hopper.
336
1
1
Hold the bean hopper and
rotate it clockwise to lock.
Put down the bean hopper
and align with .
Insert & Align
Rotate
37 38
39
Insert the power plug into
a 120V AC power outlet.
Touch the Start/Stop icon
to see if grinding sound is
smooth and there is any
powder coming out.
Idling test the machine to
check whether the grinder
running smoothly.Also to
see whether time shown
on screen starts to count
down and then machine
will automatically stop.
43
44
1
140
Hold bean hopper and
rotate to select the co-
arsest grind size.
Press & Release
Place powder chamber
under the powder outlet
(round cap on the silicone
lid must be opened and
put to one side).
1
1
MAX
41
For safety purposes, the
machine will automatically
enter safety-lock mode in
which the Start/Stop icon
will flash. In this case, long
press the Start/Stop icon
for 2 seconds to unlock.
42

9. Troubleshooting Guide
The coffee grinder cannot
be turned on.
No coffee grinds coming
from the Powder Outlet.
The powder is not being
dispensed nicely.
Some powder is stuck in
the conical burr.
Stop the operation and
immediately turn off the
coffee grinder. Clean the
conic burr refer to ''8.Care
& Cleaning " section for
detailed information. If
the conic burr is worn,
please contact with the
authorized service facility
for assistance.
The power cord is not
plugged well.
Plug the power cord into
the wall outlet correctly.
Assemble the bean hopper
to the coffee grinder before
plug in.
Because the grinder is in
protection status, let the
machine rest for 30 min-
utes to cool down. Or
unplug the grinder/take
out the bean hopper to
exit the protection status.
Not install the bean hopper
or install it incorrectly.
Grinder is overheated:
Continuous grinding
for more than 3 minutes
within 10 minutes.
No coffee beans in the
Bean Hopper.
Fill the Bean Hopper with
freshly roasted coffee
beans.
Turn the Bean Hopper in
a clockwise direction. At
Grind Setting 35, Hopper
Gates are fully open.
Hopper Gates are closed
or not fully open.
Some powder is stuck in
the conic burr when switch
grind setting size.
Burrs need cleaning.
The Grind Chamber or
Outlet is blocked.
Problem Possible Cause What To Do
3231
8. Care & Cleaning
If there are any irresolvable cleaning problems for you, contact Gevi
support team.
NOTE
Resolve the Blocking pro-
blem, refer to "8.2 Weekly
Using" to clean.
1
1
Remove bean hopper lid
from bean hopper.
45
Fill bean hopper with a sm-
all amount of fresh beans.
46
47
Secure lid on top of bean
hopper.
Check whether coffee po-
wder is being dispensed
smoothly.The preset am-
ount of coffee is dispensed
into powder chamber.
MAX
Press Start/Stop icon to run
grinder until all beans inside
are ground.
Hold and tap the grinder
carefully to drop all the
residual powder.
49
1
1
Move the powder chamber
away from grinder.
11
MAX
Close the round cap on
the silicone lid.
52
MAX
51
48
49
MAX
Tap
50

9. Troubleshooting Guide 9. Troubleshooting Guide
Bean Hopper cannot be
locked into position.
Top Burr does not sit in the
Grinder Collar correctly.
Portafilter overfills.
Grinder is louder than
normal.
The Top Burr is not seated
correctly.
Coffee beans or grinds are
caught in the Top Burr or
Grinder Collar.
The Top Burr is not seated
correctly.
The Top Burr is not seated
correctly.
Coffee beans or grinds are
caught around & under the
Top Burr.
The Top Burr is not seated
correctly.
Too much coffee grinds
coming from the Grinder
Outlet.
Grinder blocked with
foreign item.
Resolve the Blocking pro-
blem, refer to "8.2 Weekly
Using" to clean.
When correctly seated,the
white dot will be flush with
notch in the Grinder.
Remove bean hopper and
then clean burrs.
Use the Cleaning Brush
or Vacuum Cleaner as
necessary to clear loose
coffee beans or grinds.
When correctly seated,the
white dot will be flush with
notch in the Grinder.
When correctly seated,the
white dot will be flush with
notch in the Grinder.
Remove the Top Burr and
replace the Bean Hopper.
Hold the Bean Hopper
down with your hand, do
not turn.
Insert the Group Handle
into the Grinding Cradle
and push down to acti-
vate the Grinder. The
coffee grinds will fall out
the Powder Outlet.
Make sure the Top Burr is
correctly aligned and that
the two handles are placed
one on each side.
It is normal for the correct
amount of coffee to appear
overfilled in your portafilter.
Untamped coffee has app-
roximately three times the
volume of tamped coffee.
Problem Possible Cause What To Do
Optimum Grind Setting
is producing an under
extracted espresso.
Coffee grinds are coarse
when on a fine Grind
Setting.
Espresso is under extracted
even with a fine coffee grind.
New burrs are bedding in.
This is normal for the first
few uses.
Beans are losing freshness.
Not enough coffee grinds
used.
Grinds not tamped
(compacted) enough.
Grind Setting not correct.
Top Burr not seated
correctly.
Coffee beans or grinds are
caught around & under the
Top Burr.
Bottom Burrs needs
adjusting.
Not enough coffee grinds
used.
Beans are too old.
Bottom Burrs needs
adjusting.
The Bean Hopper is not
seated correctly.
Coffee beans or grinds are
caught around the Top Burr
or Grinder Collar.
Grind Setting cannot be
adjusted.
Turn the Bean Hopper
clockwise in small
increments to a finer
Grind Setting to keep
an optimum espresso
extraction.
Dose more coffee grinds.
Tamp more firmly.
Adjust the Grind Settings
by turning the Bean Hopper.
Seat top burr correctly.
Top Burr needs cleaning.
Properly adjust bottom
burr.
Dose more coffee grinds.
Use freshly roasted beans.
Old coffee beans, no matter
the Grind Setting, will have
a fast extraction and will
produce an under extracted
tasting espresso.
Properly adjust bottom
burr.
Remove the Bean Hopper
& replace.
Remove bean hopper and
then clean burrs.
Use the Cleaning Brush or
Vacuum Cleaner as necessary
to clear loose coffee beans
or grinds.
Problem Possible Cause What To Do
3433

3635
In order to make a claim under our warranty, you must have the original proof
of purchasing documentation for the product, including but not limited to Order
Number and QR Code, and present it when requested. This guarantee is valid
for the original retail purchaser from the date of initial retail purchase and is
not transferable.
Upon receipt of your claim, Gevi will seek to resolve your difficulties. Should
your product develop any defect within 12 months of purchase because of
faulty materials or workmanship, we will repair or replace this product or any
component of the product, at our discretion. Replacement will be made with
a refurbished product or component. Refurbished parts may be used to repair
the product.
Our replacement or repair warranty only applies where a defect arises as a
result of faulty material or workm anship during the warranty period. Your
warranty does not cover misuse or negligent handling (including damage caused
by failing to use the product in accordance with this instruction booklet),
accidental damage, normal wear and tear, or lack of maintenance. Do Not
attempt to repair or adjust any electrical or mechanical functions on this product.
Doing so will void this guarantee.
Your warranty does not:
cover freight or any other costs incurred in making a claim, consumable items,
accessories that by their nature and limited lifespan require periodic renewal
(such as filters and seals) or any consequential loss or damage; or
This Gevi product is covered by a 12-month
replacement or repair warranty after the order
is issued under normal use, and we will provide
customer service to answer technical questions
even after 12 months.
10. Warranty
- servicing or modification of the product other than by Gevi or an authorized
Gevi service center;
- use of the product with other accessories, attachments, product supplies,
parts or devices that do not confirm to Gevi specifications; or
- exposure of the product to abnormally corrosive condition.
cover damage caused by:
- power surges, power dips, voltage supply problems, or use of the product on
incorrect voltage;
extend beyond 3 months if the product is used in commercial, industrial,
educational or rental applications.
If your warranty claim is not accepted, we will inform you and if requested to
do so by you, repair the product provided you pay the usual charges for such
repair. You will also be responsible for all freight and other costs.
Should your product require repair or service after the warranty period, contact
Gevi after-sales team.
10. Warranty
*
*
*