9
11 HAZARDOUS USE
The conformity verification according to the essential safety rules and to the provisions of the machine directive has already
been carried out by filling out the specially provided checking lists, included in the technical file.
The checking lists are of two kinds:
List of dangers (drawn from EN 1050 referring to EN 292)
Application of the main safety features (Machine Directive– appendix. 1, part 1)
12 MAINTENANCE PROCEDURES
In case of irregularities or malfunctioning, please contact the service technician for the relevant checks.
Periodically, it is necessary to carry out the following operations:
OPERATION WORKING HOURS
Complete emptying of the boiler 30-50
This machine does not require special equipment for check and/or maintenance operations. It is however advisable to use
suitable tools and personal protections in compliance with the Italian law by decree 626/94, which have to be in good conditions
(Presidential Decree 547/55), in order to avoid any damages to persons or machine components.
Make sure that the power supply is disconnected prior to any maintenance service and that the whole
equipment has cooled down.
13 DISPOSAL
During the maintenance on the machine, or in case of its scrapping, please dispose carefully and correctly of any
polluting components, according to the local regulations. In case of scrapping, the identification rating plate and any
other document have to be destroyed.
14 HOW TO ORDER SPARE PARTS
Upon the spare parts request, please quote always:
Machine type, serial number, quantity of the requested spare parts, article number (these data can be read on the
rating plate or supplied by the technical information of the machine and by the user’s and maintenance manual).
For electrical components with a different voltage and frequency than V 220-380/50Hz (data available on the rating
plate of the faulty component), specify the correct voltage and frequency after having mentioned the article number.
The technical data, the descriptions and pictures included in this manual are not binding.
The manufacturer reserves the right to make any necessary modification without prior notice or having to up-date
the present manual.
15 HANDLING AND TRANSPORT
Before its shipment, the machine is carefully packed in a carton box. During the shipment and storing of the
machine, pay particular attention to the upside indication on the packaging. Upon receipt, please check that the
packing is intact and store the machine in a dry place.
16 WARRANTY
All Ghidini products are guaranteed for a maximum period of 12 months from delivery date as far as material and construction
defects are concerned.
The warranty is extended as follows:
In case of malfunction of the equipment, please contact your Ghidini reseller, specifying the noticed defect, type, serial number
and furthermore the operating conditions of the machine. After having received the equipment or component and after an
accurate analysis, Ghidini reserve the right, whether to repair or to replace the product. If the machine is still under guarantee,
the Ghidini reseller will carry out the service or replacement at Ghidini’s charge. In case the returned goods are not defective,
Ghidini reserve the right to charge the customer with the met expenses (shipment, etc.). The present warranty will be declared
void, if the machine has been damaged due to improper use, negligence, normal wear, chemical corrosion, installation not
according to the provided instructions and to the manufacturer’s warnings.
Any modification, tampering and alteration on the machine or its components, carried out without prior written authorization by
Ghidini, relieve the latter of any responsibility and annuls any warranty obligation. The components subject to normal wear and
the perishable ones are not under warranty, as well as everything, which has not been previously explicitly indicated, or
damages or expenses arising from defects of the same product.
The validity conditions of the guarantee provided by Ghidini are considered implicitly accepted upon purchase of the machine.
Any possible changes to or derogations from the present guarantee are only valid prior written authorization by Ghidini.
